1987-2006 Jeep Wrangler Barricade Classic Rear Bumper w/ Tire Carrier Review & Install

Shop this Barricade Classic Rear Bumper w/ Tire Carrier: terrain.jp/2PW...
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Featuring a 2" standard hitch receiver, two high strength D-Ring mounts and a spare tire carrier the Barricade Off-Road Classic Rear Bumper is perfect for off-road use. Spare Tire Carrier. The Barricade Off-Road Classic Rear Bumper features a swing out spare tire carrier perfect for tires up to 37". A custom-designed billet aluminum handle securely locks the tire carrier in place so there is no worry of it coming loose on the trail.
Manufactured from 3/16" mild steel plating and 2"x0.120" tubing this Barricade Off-Road Rock Crawler Rear Bumper is completed in a two stage finish using epoxy pre-coating and high-grade textured black powder coating for long lasting durability. The D-Ring mounts are welded both inside and outside for extra strength.
This Barricade Off-Road Classic Rear Bumper with Tire Carrier is specifically designed for use on 1987-1995 YJ and 1997-2006 TJ Jeep Wranglers.
Some application may require the license plate to be relocated as the tire carrier swing arm may contact the license plate bracket. The integrated receiver hitch is for recreational use and is not rated for towing. terrain.jp/2PW...
Item J20852
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/...
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterr...

[@extremeterrain]

Shop this Barricade Classic Rear Bumper w/ Tire Carrier: terrain.jp/2PWxVYO
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@chisholmranch1]

So is that tire mount a 5 on 4.5 x 15

[@JavierPadron]

Can u tow with this bumper at all?

[@TheRedStateBlue]

so it has a spot for a trailer hitch, but isn't tow rated?
what a piece of junk.

[@extremeterrain]

It's mainly used for tailgate mounted accessories that don't require a tow rating. Bike racks, storage baskets, a step, and so on.

[@jeffmason8230]

Will this tire carrier interfere with the Jeep YJ flip down license plate?

[@ujayet]

I need a girl like her.

[@jimmyvalhalla1939]

I bought this bumper for my LJ from Extreme. I drilled and tapped the hinge for a grease zerk and I had to buy new bolts because the bolts included are too short. If you DO NOT have a body lift you will have to notch the license plate mount... no biggie. Also, their wasn't enough adjustment to get my 5th wheel/ tire to fit against the frame, so I had to drill and tap and install some rubber spacers. I'm running 255/85/16 km2 on 8x16 with 4" BS.
When I put 315/75/16's on, I will be able to remove the rubbers spacers, if I want...
It wasnt an issue for my LJ, but if you have a YJ or TJ, watch that you don't drill into you gas tank when drilling the holes through the rear cross member!! I suggest a step bit...
It's a nice bumper. I recommend.

[@dylanduarte6995]

probably because it is made for the TJ and YJ. I don't see LJ on it anywhere.

[@jeff2023]

Including nylock nuts is a waste if the bolts aren’t long enough to go thru the nut

[@GEORGEFIRE777]

looks great ,i think that 1/4 inch thick tubing would be better size,reciever hitch is there but not rated to tow ? could be a liability issue, locktite or lock washers on the bottom bolts is better than 2 flat washers.I realize your need to keep production cost down, but as a buyer this bumper is not strong enough for what i do.

[@sensei1781]

Terrible video. The bumper doesnt just come preassembled with all that hardware for you to attach your jeep as shown in the video at 8:00. What is the point of the video if it doesnt even match the instructions that come in the box?

[@nissan300ztt]

WTF NO Antiseize?

[@liven4happynus115]

Which bumper swing out tire carrier is tow rated, for towing a small trailer. 1700 lbs

[@heavychevy743]

Can I pull a small trailer with a dirtbike or four wheeler with that bumper

[@slashsplat]

Well done vid. Thanks

[@extremeterrain]

Thank you for watching! We appreciate it! -Zach

[@carnage0615]

❤😮❤

[@markmorris5880]

Very informative as I am expecting this tail gate kit to arrive on friday and have been prepping my TJ by removing the previous bumper, (not easy as one side was dinged up by a drunk driver) but seeing this video now makes it more clear how the new bumper mounts to the frame which is extremely helpful!

[@extremeterrain]

We hope you enjoy it!! Thanks so much for watching.

[@slurpyman20]

This bumper is not as strong as the real version smittybilt. This only uses 3 bolts on each side. Smitty uses 7 bolts each side. The xrc bumper uses 7 bolts each side

[@nissan300ztt]

Smitty Bilt isnt that great. You cant tow with theirs

[@hammadimejri6102]

Plaise explique franicheta takyou vret matche

[@412milefarm6]

I love mine

[@extremeterrain]

Awesome, Rob! Thanks for your comment and thanks for watching! -Zach

[@BerniesBastelBude]

looks really cool - I'm wondering if it's legal in Germany ?!?

[@extremeterrain]

Not entirely sure in all honesty! I would check with local mechanics, law enforcement, or any local off-road clubs to see what sort of specifications need to be met for on-road vehicles if you're worried. Thanks for watching! -Zach

[@hudsonduke9916]

Would a -43 offset wheel stick out to far on this bumper?

[@extremeterrain]

I wouldn't say *too* far, but it will definitely sticking out a good bit. -Zach

[@hudsonduke9916]

Ok thanks

[@tacomax7183]

💘💘