Best free data recovery software:bit.ly/3ivHRr2 Awesome TV Boxes Check Them All Out Here www.gearbest.com/tv-box-c_12313/?lkid=78003117 Check out the Beelink GT-King www.gearbest.com/tv-box/pp_009284337237.html?wid=1349303&lkid=78003165 Budget Freindly TV box www.gearbest.com/tv-box/pp_009704434969.html?wid=1433363 True Force of Nature TV box: Beelink GT-King Pro www.gearbest.com/tv-box/pp_009608757058.html?wid=1349303 Gearbest Deals Page www.gearbest.com/promotion-Double-12-special-3908.html?GB_regular_191210_157597612_i12&eo=8V46WLP7ZOBCTV15&lkid=78003195 Gearbest Mobile Phone Deals www.gearbest.com/cell-phones-c_11293/?GB_cellphone_gb_191209_1575886435_y12&eo=CZC417HDMLI2LS0R&lkid=7800324
It's 2023, and I just wanted to let you know after 3-4 hours trying to get USB Burning Tool to work, your video finally got it going for me. I had no idea I had to have it started and then power it on, I was trying to figure out why device was not showing up. Thank you
My X96 Max 4Gb 64Gb was bricked, would not go past the X96 splash screen and no lights. I tried the SD method and nand shorting but neither worked. This is what fixed and reloaded with android pie. The hardest thing was finding the exact firmware for my box. Working great now. Ordered the rare male to male USB cable from Amazon for $4. Thank you!
For those struggling with installing new firmware (program giving errors part way thru) it seems if you load the image, than click start and than plug in the box the errors tend to stop not always but it's normally my first go too when I get errors part way thru install and in all honesty I have no clue why this works but I've tried repeated times just getting the same error over and over but for some reason this seems to fix the issue on my end a good deal of the time.
If you're using Windows 10 and USB Burning Tool won't detect your device, try unchecking all of the "erase" boxes top right corner. Thanks for this video sometimes it's the simple things that drive you bonkers 👍
My pc was having problem's detecting my device with the "Erase boxes" checked in USB Burning Tool. I unchecked the "Erase flash" and "Erase bootloader" which is ALL of the "Erase boxes" and my pc detected my device which was a T95x Android Box. This method worked for me but may not work for you , its really trial and error that got me to that method for my specific android box. Good Luck!
I kept getting stuck at 2% - 4 years later your post helped yet another person. Combined with the 2.08 version from this video; problem solved and fully flashed. Thank you both.
I do everything as you said. But in the end, when you need to load me on the side of the device, nothing just happens .... nothing appears in the program under the device like yours where it says HUB5..Nothing appears and the download system does not start
I have an x92 3G/32GB android tv box, and it came with android 7.1.2 when I never ordered that from GearBest.. -_- .. SO I want to bring it back to android 6.0.1 which I did order.. I was able to get the .img file from the seller, but Usb Burning Tool just won't recognize my device.. I'm holding in the pin and connecting it to ALL 4 USB ports.. and nothing.. it looks fully powered via the usb cable too. Also I tried Burn Card Maker and get nothing but an error when using an SD Card. Currently my x92 3G/32G android tv box freezes on the boot logo due to me trying to use programs to update my tv box (I seemed like the ONLY choice.. as NOTHING worked..) So here I am... Help me please? This is stressful and infuriating, especially since my month warranty is expired already. Is there ANY other program I can try? Also the firmware .img file I have didn't come with a license.
Bnt amigo. Tenho 1 box tv H96 PRO+ ALFAWISE que so fica travado na tela H96 PRO+. Ja tentei dar 1 reset pelo botão, mas abre tela H96 PRO+ se continuo apertando, fica tela escura e não mostra opções pra restaurar, formatar etc. Nesse caso, não é necessário o curto, pq o botão t´ativo, mesmo assim deu o curto, mas o PC NÃO RECONHECE o driver AnLogic e dá mensagem: " O Windows não pode verificar o editor desse software de driver", e por isso NÃO tô conseguindo flashar a rom e ou nem reparar . Usei Win 7 x64 e x86 e Win 10 x64, em todos mesmo problema. Pode me ajudar, por favor? Obrigado
Hi, I have a problem with the mxq pro 4k device, it looks like a chinese clone and is not original, The writing in front of it says "MXG PRO 4K" (not mxq) and the reset button is at the SPDIF input (not AV ). When I went open the USB BURNING TOOL program and I entered the IMG firmware (power on procedure, hold down the reset button, ..) at 2% with 7 seconds it stops with an error "0x10105004 romcode / Initialize DDR / Read initialized status / error result. Reading around on the internet to solve the problem I had to disable "erase flash" and "erase bootloader" and do 100%. It was successful (it doesn't seem). Now I am with red led light steady and does not go to blue led. What does this error "0x10105004 romcode / Initialize DDR / Read initialized status / error result" mean? usb wire too long? the firmware not suitable for the box? box chinese and cannot be restored. What firmware do you recommend me to do? does the jtag exist to solve the problem?
Hello. I also downloaded the USB Burning and MXQ PRO PLUS 4K Firmware, but does not give any sign to the program. Connect the tv box to pc but you do not know this program...Help me please?
mxq pro 4k amlogic s905 i have problem with random mac every reboot how to fix this i have paid version siptv on this box but this app authorise with mac adress.
I have bricked my Mini M8 s905x AMlogic box trying to update it, have unsuccesfully tried to restore it by SD card. I am now trying to use USB burning tool but keep getting a "Romcode/initialize DDR/Read initialize status/USB Control setup error" message, whichever USB port I try on the puter. I have seen a youtube video that advises you can select the "force erase" option on USB burning tool, but I dont get this option on my app, it only lets me select "normal erase". Please can anyone advise me on this?
Very strange, i start usb burning tool, upload the image, put tooth pick in the hole, connect usb and get into android recovery with various menu :( how to flash that thing mxq s905x
I have a bricked MyGica ATV 495PRO HDR and MyGica only provides an img type firmware for SD Card flashing(not a zip file like most SD Card update firmware). Is there a way to convert this firmware to an AML firmware so I can use the Amlogic USB burning tool to flash it ?
The IMG file is used when using amlogic burning tool? Burn card maker also uses these IMG files. Your thinking of the Android setup files used with something like TWRP.
Hi i have a S905X but cannot find my stock firmware anywhere since this is a country specific device (X-View Droidbox) can i use a rom like the atvxperience one? I can't even boot to the recovery mode. Thanks for your time and your tutorials.
Help me please, I just can't connect my box to this tool, i do everything I even tried using power supply + USB afterwards thinking it isn't getting enough power. Still won't connect.
My guess is you need to install the drivers first ( using only the uSB cord- no power connection) open the amlogic tool Click on InstallDriver.exe (located in the WorldCup_Device folder)- then follow the easy setup- then go back and start the tool - DO press the start button ( after loading firmware) before you connect the USB from computer to your box - also hold down the reset button till you see the blue bar start across- 1% , 2% etc
Katarina Sorry about being so late . i just found this ( the way I get it to work is to hit the start button ( after you have loaded the img file) - before you connect the USB ( while holding in the reset button) - then after you see the progress bar show 1 or 2 percent, then release the “ reset button- hope this helps , again sorry about being so late with this. Rodger
I have a t95 mini android box that DOESNT have a micro SD card. Can I flash a different version of android or linux (preferably Ubuntu) using a USB drive since my device doesn't have micro SD?
Help, trying to flash a mk80 4gb box, when it boots up it shows the RKM logo then a black screen, nothing else. Try flashing it with factory firmware and same thing happens on start ip of box.
am trying to fix an m8s+ of my friend. the box is running Kodi and he wants to turn it back to android again. am facing problem load the image file the USB burning tool won't see my device .. can someone help me through team viewer, please?
I wanted to flash a tv box s10 with a license. With the help of a PC and a USB cable, and using the USB Burning Tool, I ran into this [0x00000fff] Get key falled and could not
Is there a way that I can save all the contents of my Android box (including OS, Apps, Recovery partition, Boot partition) as an image which can later be used by USB_burning_tool to flash the machine again, or to clone on another box?
I am trying to fix a h96 pro+ for a friend. It has a static looking problem on black scenes. Is this due to the firmware problem or is this some other possible fix. Certain colours look like there is a power flux when plugged into the TV. Any ideas?
MXQ PROJECT I just went and swapped it with the hdmi cable that runs my shield flawlessly, and it still does it. It looks like old fashioned snow from analog TV running through dark colored areas of the screen
I dont think it will be the firmware - Before messing around with the android firmware, you could dual boot KSZAQ's libreelec and play some video files with that and see what happens.
I tried using the software on my T95N android box and it's still giving me an error. The box is dead and I was trying to revive it. I even tried down grading and everything plus having the stock firmware too. DDR issue something like that. Is there any other solution???
I tried erasing the flash only without erasing the boot loader and it went through but killing the box as a consequence. When I tired it with both erasing the flash with bootloader and wasn't working that's before killing the box.
I also used the recent version including the older versions available. USB still connects and the program reads the connection but still no good results.
Hello friend, greetings from Mexico City. A favor, you will have a video tutorial on how to install the H96 Pro firmware with an S912 processor. Greetings.
Hey good video, I want to try this usb burner tool with an older box as I have before with a newer box and worked fine, the problem is thow I cannot find the IMG file firmware anywhere for the Matricom gbox midnight mx2 box. It's almost like it doesn't exist or has been wiped off the internet, if anyone knows I'd greatly apriciate it.
Might need to search pretty deep into likes of freaktab for this firmware, matricom don't even have it listed anymore - Their is however latest Libreelec for this old box and few other developments
@@MXQPROJECT yeah, I have the firmware but it's only extracted into smaller files ment to flash with an SD which I cannot do cus I need to put the stock firmware on it I guess only with the IMG file firmware.. Thanks, do u mean I could put other firmware from some developers on it regardless as the state it's in atm? I'm not even sure how to do that or where to start
@@MXQPROJECT yes it's a zip, ahh lol yeah this box is like a dinosaur I guess, matricom no longer supports Rom nor updates for the mx2, you mentioned though their are some other options of perhaps some developers ROMs will flash on good? Do u know if I could still install xbmc/kodi and google services? I would like to try that as the last resort but could u guide me in the right direction, I feel bad to ask so much it's just I like to learn from people like your self of knowledge to these things more thank you
Question for you brother. Thanks for making the video. I can't for the life of me get my windows 10 PC to recognize the fact that the bee link is plugged in. Any insight? Using a USB-A to USB-A cable.
Thank you for responding! One more quick question. It seems like a USB A to USB A plug is required for this? That's known to possibly damage electronics. Any work around for that? I still can't get the damn program to recognize that the Bee-Link is plugged into my computer.
Thanks for the reply! I think the problem was that I was using Windows 10. I used a system that had Win7, and it started to work. I still had errors with the firmware loading, though. I'm going to try the burn card maker now, but I'm wondering if I have the right firmware as well. You wouldn't happen to know what firmware would work for Hiswe T95Z Plus box?
it either a mixture of your windows system not having it with the version of burning tool, the IMG itself or simply try another version of burning tool
Everytime I try this I get the same error at 7%: formatting (0x30201006 UBOOT/Disk initialize/Send command/Time out). Already tried two different computers and more tha 10 usb ports. Anyone know how to fix this? I have a MXIII-GII box.
You can backup the firmware into a ZIP file using the inbuilt system updater on some boxes and other can backup using TWRP but if you want an IMG file for use with burning tool it's not so easy
this is the only file what will work,S812-20160116 M9&M8_8bit_V1.1 n200c_b device theres nothing out there with this file. its a one of a kind. it must be
I do everything as you said. But in the end, when you need to load me on the side of the device, nothing just happens .... nothing appears in the program under the device like yours where it says HUB5..Nothing appears and the download system does not start
![Turn off these android box settings NOW - [EASY] Improve Android box performance settings 📺](http://i.ytimg.com/vi/i7h_8SPBKFI/mqdefault.jpg)
Best free data recovery software:bit.ly/3ivHRr2
Awesome TV Boxes Check Them All Out Here
www.gearbest.com/tv-box-c_12313/?lkid=78003117
Check out the Beelink GT-King
www.gearbest.com/tv-box/pp_009284337237.html?wid=1349303&lkid=78003165
Budget Freindly TV box
www.gearbest.com/tv-box/pp_009704434969.html?wid=1433363
True Force of Nature TV box: Beelink GT-King Pro
www.gearbest.com/tv-box/pp_009608757058.html?wid=1349303
Gearbest Deals Page
www.gearbest.com/promotion-Double-12-special-3908.html?GB_regular_191210_157597612_i12&eo=8V46WLP7ZOBCTV15&lkid=78003195
Gearbest Mobile Phone Deals
www.gearbest.com/cell-phones-c_11293/?GB_cellphone_gb_191209_1575886435_y12&eo=CZC417HDMLI2LS0R&lkid=7800324
😊😊😊😊😊😊
😊😊
It's 2023, and I just wanted to let you know after 3-4 hours trying to get USB Burning Tool to work, your video finally got it going for me. I had no idea I had to have it started and then power it on, I was trying to figure out why device was not showing up.
Thank you
My X96 Max 4Gb 64Gb was bricked, would not go past the X96 splash screen and no lights. I tried the SD method and nand shorting but neither worked. This is what fixed and reloaded with android pie. The hardest thing was finding the exact firmware for my box. Working great now. Ordered the rare male to male USB cable from Amazon for $4. Thank you!
For those struggling with installing new firmware (program giving errors part way thru) it seems if you load the image, than click start and than plug in the box the errors tend to stop not always but it's normally my first go too when I get errors part way thru install and in all honesty I have no clue why this works but I've tried repeated times just getting the same error over and over but for some reason this seems to fix the issue on my end a good deal of the time.
If you're using Windows 10 and USB Burning Tool won't detect your device, try unchecking all of the "erase" boxes top right corner.
Thanks for this video sometimes it's the simple things that drive you bonkers 👍
McVeigh 963 Thank you so much for this, i have been struggling for hours to fix this problem. 👍
Peffie The master You're more than welcome! Hope everything is working for you now! :)
When you say all of the "erase" are you saying just the first 2 check boxes or all 4 of them?
My pc was having problem's detecting my device with the "Erase boxes" checked in USB Burning Tool. I unchecked the "Erase flash" and "Erase bootloader" which is ALL of the "Erase boxes" and my pc detected my device which was a T95x Android Box. This method worked for me but may not work for you , its really trial and error that got me to that method for my specific android box. Good Luck!
I kept getting stuck at 2% - 4 years later your post helped yet another person. Combined with the 2.08 version from this video; problem solved and fully flashed. Thank you both.
I do everything as you said. But in the end, when you need to load me on the side of the device, nothing just happens .... nothing appears in the program under the device like yours where it says HUB5..Nothing appears and the download system does not start
Following this video bricked my device
when i connect my receiver it says device not recognized with a yellow exclamation mark from my windows 10 pc
Bricked my Tanix TX9 Pro tonight - Thank you for this excellent guide to unbricking my system!
Hi what is the website for the usb burning tool and firmware
I have an x92 3G/32GB android tv box, and it came with android 7.1.2 when I never ordered that from GearBest.. -_- .. SO I want to bring it back to android 6.0.1 which I did order.. I was able to get the .img file from the seller, but Usb Burning Tool just won't recognize my device.. I'm holding in the pin and connecting it to ALL 4 USB ports.. and nothing.. it looks fully powered via the usb cable too. Also I tried Burn Card Maker and get nothing but an error when using an SD Card.
Currently my x92 3G/32G android tv box freezes on the boot logo due to me trying to use programs to update my tv box (I seemed like the ONLY choice.. as NOTHING worked..) So here I am... Help me please? This is stressful and infuriating, especially since my month warranty is expired already.
Is there ANY other program I can try? Also the firmware .img file I have didn't come with a license.
Bnt amigo. Tenho 1 box tv H96 PRO+ ALFAWISE que so fica travado na tela H96 PRO+. Ja tentei dar 1 reset pelo botão, mas abre tela H96 PRO+ se continuo apertando, fica tela escura e não mostra opções pra restaurar, formatar etc. Nesse caso, não é necessário o curto, pq o botão t´ativo, mesmo assim deu o curto, mas o PC NÃO RECONHECE o driver AnLogic e dá mensagem: "
O Windows não pode verificar o editor desse software de driver", e por isso NÃO tô conseguindo flashar a rom e ou nem reparar . Usei Win 7 x64 e x86 e Win 10 x64, em todos mesmo problema. Pode me ajudar, por favor? Obrigado
Hi, I have a problem with the mxq pro 4k device, it looks like a chinese clone and is not original, The writing in front of it says "MXG PRO 4K" (not mxq) and the reset button is at the SPDIF input (not AV ). When I went open the USB BURNING TOOL program and I entered the IMG firmware (power on procedure, hold down the reset button, ..) at 2% with 7 seconds it stops with an error "0x10105004 romcode / Initialize DDR / Read initialized status / error result. Reading around on the internet to solve the problem I had to disable "erase flash" and "erase bootloader" and do 100%. It was successful (it doesn't seem). Now I am with red led light steady and does not go to blue led.
What does this error "0x10105004 romcode / Initialize DDR / Read initialized status / error result" mean? usb wire too long? the firmware not suitable for the box? box chinese and cannot be restored.
What firmware do you recommend me to do? does the jtag exist to solve the problem?
Hello. I also downloaded the USB Burning and MXQ PRO PLUS 4K Firmware, but does not give any sign to the program. Connect the tv box to pc but you do not know this program...Help me please?
i have a H96max x2 with a s905x2 processor but the only firmware i found do not work "aml_s905x2_H96MaxX2_4g_mac_wifi_20190114"
i got USB 3.0 Male to male 0,5 meter long...should be okay?
where can i get Amlogic USB Burning Tool software that works?
Hola que tal, no me reconoce el device del tvbox mxq
mxq pro 4k amlogic s905 i have problem with random mac every reboot how to fix this i have paid version siptv on this box but this app authorise with mac adress.
I have bricked my Mini M8 s905x AMlogic box trying to update it, have unsuccesfully tried to restore it by SD card. I am now trying to use USB burning tool but keep getting a "Romcode/initialize DDR/Read initialize status/USB Control setup error" message, whichever USB port I try on the puter. I have seen a youtube video that advises you can select the "force erase" option on USB burning tool, but I dont get this option on my app, it only lets me select "normal erase".
Please can anyone advise me on this?
buenas mi box s no me genera puerto hub 3 para poder flashiar que me recomiendan
Will it work on jio stb?
i have connected my g nest hub and it is not showing
help. i have error mesage when trying to load .img file "parse burning image fail"
Hi where can i get a image file for Q box 16g its stuck on the logo i tried to reset but does not work so i need to flush i just need the image please
Very strange, i start usb burning tool, upload the image, put tooth pick in the hole, connect usb and get into android recovery with various menu :( how to flash that thing mxq s905x
Hello everyone, but a firmware for mxq s905x amlogic wi-fi chip sv6051p?
I'm going crazy to find it .... can you help me find it? thank you
I have a bricked MyGica ATV 495PRO HDR and MyGica only provides an img type firmware for SD Card flashing(not a zip file like most SD Card update firmware). Is there a way to convert this firmware to an AML firmware so I can use the Amlogic USB burning tool to flash it ?
The IMG file is used when using amlogic burning tool? Burn card maker also uses these IMG files. Your thinking of the Android setup files used with something like TWRP.
Hi i have a S905X but cannot find my stock firmware anywhere since this is a country specific device (X-View Droidbox) can i use a rom like the atvxperience one? I can't even boot to the recovery mode. Thanks for your time and your tutorials.
Yeah possibly
Anything for a G9SX that has a red light only and wont boot?
boot.img A95X F3- Air S905x3?
Can I use this to backup the old firmware first before installing the new firmware?
No, you will need to use the inbuilt backup app thats on most TV boxes or something like TWRP.
Help me please, I just can't connect my box to this tool, i do everything I even tried using power supply + USB afterwards thinking it isn't getting enough power. Still won't connect.
My guess is you need to install the drivers first ( using only the uSB cord- no power connection) open the amlogic tool Click on InstallDriver.exe (located in the WorldCup_Device folder)- then follow the easy setup- then go back and start the tool - DO press the start button ( after loading firmware) before you connect the USB from computer to your box - also hold down the reset button till you see the blue bar start across- 1% , 2% etc
@@rodgerfassio2532 it stops at 2% something bout udisk error message idk
Katarina
Sorry about being so late . i just found this ( the way I get it to work is to hit the start button ( after you have loaded the img file) - before you connect the USB ( while holding in the reset button) - then after you see the progress bar show 1 or 2 percent, then release the “ reset button- hope this helps , again sorry about being so late with this.
Rodger
Thank you. Your video helped me reflash my box.
Good stuff
I have a t95 mini android box that DOESNT have a micro SD card. Can I flash a different version of android or linux (preferably Ubuntu) using a USB drive since my device doesn't have micro SD?
Depends really but USB booting Is normally supported nowadays
why does'it block at 03 percent no errors but doesn't avance more than that in 14 hours of burning or flashing ??!!
Try burn card maker
Help, trying to flash a mk80 4gb box, when it boots up it shows the RKM logo then a black screen, nothing else. Try flashing it with factory firmware and same thing happens on start ip of box.
Allwinner processor in that RKM box ?
Allwinner processor in the RKM YES.
am trying to fix an m8s+ of my friend. the box is running Kodi and he wants to turn it back to android again. am facing problem load the image file the USB burning tool won't see my device .. can someone help me through team viewer, please?
does it work on tablets with amlogic processor?
I'm not sure but I would suspect it does
how to change the result from twrp backup to img file so you can flash it via usb burning tools, please ?
Can't do it, need an IMG file
shows initial disk error
Unfortunately my box doesn't seem to want to reset with that button in the AV port. (MXQ Pro 4K)
try in SPDIF hole
so no need to even connect the power court ?
No need
I wanted to flash a tv box s10 with a license. With the help of a PC and a USB cable, and using the USB Burning Tool, I ran into this [0x00000fff] Get key falled and could not
I have bricked my google nest hub ..will this work??
Nope, not a chance
Is there a way that I can save all the contents of my Android box (including OS, Apps, Recovery partition, Boot partition) as an image which can later be used by USB_burning_tool to flash the machine again, or to clone on another box?
Yeah You can use TWRP to do this
@@MXQPROJECT can the output from the TWRP backup be used as input for usb_burning_tool?
No, will need to use TWRP.
@@MXQPROJECT what tools do folks who build custom ROMs use to create their img files?
Android SDK studio.
I am trying to fix a h96 pro+ for a friend. It has a static looking problem on black scenes. Is this due to the firmware problem or is this some other possible fix. Certain colours look like there is a power flux when plugged into the TV. Any ideas?
Sounds like a bad HDMI cable
MXQ PROJECT I just went and swapped it with the hdmi cable that runs my shield flawlessly, and it still does it. It looks like old fashioned snow from analog TV running through dark colored areas of the screen
I dont think it will be the firmware - Before messing around with the android firmware, you could dual boot KSZAQ's libreelec and play some video files with that and see what happens.
good afternoon
for lack of care damage the button of recet, comom I can do to recover my T95Z plus
Thank you
Makes it rather difficult without the reset button
What version of windows are you using for this program. Windows 10 or 7
windows 7
I tried using the software on my T95N android box and it's still giving me an error. The box is dead and I was trying to revive it. I even tried down grading and everything plus having the stock firmware too. DDR issue something like that. Is there any other solution???
I tried erasing the flash only without erasing the boot loader and it went through but killing the box as a consequence. When I tired it with both erasing the flash with bootloader and wasn't working that's before killing the box.
I also used the recent version including the older versions available. USB still connects and the program reads the connection but still no good results.
what program are you using to get image file I know silly question
IMG files are downloaded online and are speicific to your hardware
Hello friend, greetings from Mexico City. A favor, you will have a video tutorial on how to install the H96 Pro firmware with an S912 processor. Greetings.
plenty firmware for this box - just follow this guide as it basically what you need
What is this beep going on through the whole video
You are pushing your pen into the AV connector, not the Reset Button...
Their is a button located inside this connector on 90% of TV boxes
Hello sir..how to connect this box with pc?
Hi I have a Q box 16g i cant seam to find an image file can anyone help please?
where is firmware sir
Hey good video, I want to try this usb burner tool with an older box as I have before with a newer box and worked fine, the problem is thow I cannot find the IMG file firmware anywhere for the Matricom gbox midnight mx2 box. It's almost like it doesn't exist or has been wiped off the internet, if anyone knows I'd greatly apriciate it.
Might need to search pretty deep into likes of freaktab for this firmware, matricom don't even have it listed anymore - Their is however latest Libreelec for this old box and few other developments
@@MXQPROJECT yeah, I have the firmware but it's only extracted into smaller files ment to flash with an SD which I cannot do cus I need to put the stock firmware on it I guess only with the IMG file firmware.. Thanks, do u mean I could put other firmware from some developers on it regardless as the state it's in atm? I'm not even sure how to do that or where to start
Am assuming it is a ZIP file, you can only use the recovery menu on the box to install that from a usb stick
@@MXQPROJECT yes it's a zip, ahh lol yeah this box is like a dinosaur I guess, matricom no longer supports Rom nor updates for the mx2, you mentioned though their are some other options of perhaps some developers ROMs will flash on good? Do u know if I could still install xbmc/kodi and google services? I would like to try that as the last resort but could u guide me in the right direction, I feel bad to ask so much it's just I like to learn from people like your self of knowledge to these things more thank you
Do you have a favoured third party Rom (like which one is best in your opinion) also can I use this usb burner tool to flash it?
anybody know of a burner tool for Mac?
what can I do for mxq pro 4kk tv box stuck on red light????
please replay
Recover it - Yours may be a Rockchip version
What is rockship virtion?
If you connect to computer dont use hubs or front USB ports, use back ports (on motherboard) !!!
Need to locate the OTG port located on the front side or back, is different on all tv boxes
Question for you brother. Thanks for making the video. I can't for the life of me get my windows 10 PC to recognize the fact that the bee link is plugged in. Any insight? Using a USB-A to USB-A cable.
Yeah windows 10 hates burn tool, well in my experience anyway. Need to find a windows 7 machine.
Thank you for responding! One more quick question. It seems like a USB A to USB A plug is required for this? That's known to possibly damage electronics. Any work around for that? I still can't get the damn program to recognize that the Bee-Link is plugged into my computer.
You could try using burn card maker
plz help my pc not detecting my x96 mini
Help! i followed your instruction but at 7% i get an error (0x30201004) uboot/disk initialize/ send command / error
Ok, maybe try an older version of burning tool - Can also try our burn card maker tutorial
please help. the tool doesn't see any image files I've downloaded and extracted.
should do, ensuring the image file has a .IMG file name at end
i actually had to go direct file path, from file menu opener, c: users: my name: downloads,
my img is saved on my desktop and when i go to select for an img it dosnt show up help pls
Does it have the file name '.img' at the end, make sure it's unzipped.
@@MXQPROJECT i fixed it i needed a win zip app lol all done buddy thks for getting back to me
Not sure what I'm doing wrong, but I can't get my system to recognize any box I connect
Maybe use our burn card maker tutorial instead
Thanks for the reply! I think the problem was that I was using Windows 10. I used a system that had Win7, and it started to work. I still had errors with the firmware loading, though.
I'm going to try the burn card maker now, but I'm wondering if I have the right firmware as well. You wouldn't happen to know what firmware would work for Hiswe T95Z Plus box?
howcome i get error on 1% and it won't progress anymore. i tried the same several times -probably 20 times and the same result.
it either a mixture of your windows system not having it with the version of burning tool, the IMG itself or simply try another version of burning tool
thank you MXQ Project!!!!!!!!
Romcode/Initialize DDR/Download buffer/Read item data failed .. saya mengatasi seperti ini ..kira2 solusinya gimana y abg2 .. mohon bantuanya
set-box seri fiberhome ng680-p
Everytime I try this I get the same error at 7%: formatting (0x30201006 UBOOT/Disk initialize/Send command/Time out).
Already tried two different computers and more tha 10 usb ports. Anyone know how to fix this?
I have a MXIII-GII box.
Same with me u got any solution?
same here, no answer from nobody
same
Same here... Did you managed to solve it?
Not detecting tv box, helpme pls?!
how I can drag the firmware from the amlogic tv Box
You can backup the firmware into a ZIP file using the inbuilt system updater on some boxes and other can backup using TWRP but if you want an IMG file for use with burning tool it's not so easy
hi , i got the error at 1%: [0x00000fff]Get Key Failed , any solution?
I got the same error. Did you find a solution?
Friends to anyone who has a teaser who does not work on fear to try to fix better than a song on the shelf
USB tool link not working
Brian Evangelista It's working fine for us.
Whoa....Thanks a lot! It works!!!
No me reconoce la img nada nunca.
[HUB1-4][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
can you help me please ?
does not work
0x00000fff get key failed ... help plz !!!
Got this same error. Did you ever figure it out?
hapaguy2001 solved...
im after a usb aml file for my amalogic m8s android box
Check out the mxqproject facebook group, members have firmware for your device.
been on facebook and looked around, nothing on firmware for the m8s just TUTORIAL on how to do it. no firmware
No, I mean ask on the our MXQproject facebook group someone will have firmware for you
this is the only file what will work,S812-20160116 M9&M8_8bit_V1.1 n200c_b device theres nothing out there with this file. its a one of a kind. it must be
Funcionou!
Isso aí!! será que funciona na OTT TV BOX TX3 mini xingling ?
x96 air firmware
Help me brooo
Magicsee c400 plus show this error
[00:06:54 343][HUB5-6][Err]--[0x10105004]Romcode/Initialize DDR/Read initialize status/Error result
[00:06:54 343][HUB5-6][Inf]--Close device handle 0x00000140
[00:06:54 375][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[00:06:54 375][Global][Inf]--Scan usb device
[00:06:54 375][Global][Inf]--Aml scan WorldCup Device
[00:06:54 375][Global][Inf]--Host: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
[00:06:54 375][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_27c8&subsys_27c88086&rev_01#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:06:54 375][Global][Inf]---->Roothub:USB#ROOT_HUB#4&e1988c3&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:06:54 390][Global][Inf]-------->[Port0]Other device
[00:06:54 390][Global][Inf]-------->[Port1]Other device
[00:06:54 390][Global][Inf]--Host: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
[00:06:54 390][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_27c9&subsys_27c98086&rev_01#3&11583659&0&e9#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:06:54 390][Global][Inf]---->Roothub:USB#ROOT_HUB#4&a1392c&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:06:54 390][Global][Inf]-------->[Port0]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port1]NoDeviceConnected
[00:06:54 390][Global][Inf]--Host: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
[00:06:54 390][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_27ca&subsys_27ca8086&rev_01#3&11583659&0&ea#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:06:54 390][Global][Inf]---->Roothub:USB#ROOT_HUB#4&2f867985&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:06:54 390][Global][Inf]-------->[Port0]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port1]NoDeviceConnected
[00:06:54 390][Global][Inf]--Host: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
[00:06:54 390][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_27cb&subsys_27cb8086&rev_01#3&11583659&0&eb#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:06:54 390][Global][Inf]---->Roothub:USB#ROOT_HUB#4&163ff15&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:06:54 390][Global][Inf]-------->[Port0]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port1]NoDeviceConnected
[00:06:54 390][Global][Inf]--Host: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
[00:06:54 390][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_27cc&subsys_27cc8086&rev_01#3&11583659&0&ef#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:06:54 390][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&6264150&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:06:54 390][Global][Inf]-------->[Port0]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port1]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port2]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port3]Other device
[00:06:54 390][Global][Inf]-------->[Port4]NoDeviceConnected
[00:06:54 390][Global][Inf]-------->[Port5]NoDeviceConnected
[00:06:54 406][Global][Inf]-------->[Port6]Other device
[00:06:54 406][Global][Inf]-------->[Port7]NoDeviceConnected
[00:06:54 406][Global][Inf]--Scan USB host controller complete
[00:06:54 406][Global][Inf]--Update data center with HubMap
[00:06:54 406][Global][Inf]--Update hub5 device data
[00:06:54 406][Global][Inf]--Update HUB5-1
[00:06:54 406][HUB5-1][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-2
[00:06:54 406][HUB5-2][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-3
[00:06:54 406][HUB5-3][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-4
[00:06:54 406][HUB5-4][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-5
[00:06:54 406][HUB5-5][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-6
[00:06:54 406][HUB5-6][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-7
[00:06:54 406][HUB5-7][Inf]--Update device path
[00:06:54 406][Global][Inf]--Update HUB5-8
[00:06:54 406][HUB5-8][Inf]--Update device path
[00:06:54 406][Global][Inf]--Scan end
I do everything as you said. But in the end, when you need to load me on the side of the device, nothing just happens .... nothing appears in the program under the device like yours where it says HUB5..Nothing appears and the download system does not start