me & my cousin(master vw mechanic)use to do vr6 swaps into mk2 gti's 20 years ago when it was rare, and we never had a engine hoist we used dolly carts, dropped the engine& tranny on the cart & push em out
I was expecting a weeks worth of vlogs for the engine removal and you managed it in a day . Very nicely done dude .Very nicely done . 👍 it’s going to be awesome watching you pull the VR5 out and fitting it in the Savoy with those sick engine mounts. That car will be so unique and cool when it’s done . Excellent as always Christian. ⭐️⭐️⭐️⭐️⭐️
weyland1000 pulling an engine out of a mk3 is surprisingly easy if you don’t run into any roadblocks which thankfully I didn’t lol appreciate the support man!🤘🏼
Nice to see a good condition mk3. Ones up here in Norway are all rusting apart, and there's barely any left that hasn't holes in the canals, floor, strut towers, a-pillars etc.
Yeah!! That's bad ass! Looking forward to seeing these mounts and especially the harness that your getting. Is the mk3 power stearing going to work on the vr5?
Honestly I’m not exactly sure I know my power steering lines worked fine from the 2.0 to the Vr6 so I’ll have to see how the power steering pump on the v5 connects but I think it’ll work hopefully haha
Great job fast and easy,I hope I can pull mine that smooth. I'm going to do your old swap 2.0 to VR-6 for my MK-3 GTI Golf. You make it so simple.Great Job.
notice its the old Abs.... soo good job on cutting the loom. nobody is going to mis that P.O.S haha. birhgt side when you puleld the entire loom and ecu.. you just removed 13,7 ish kg. ;P #CusRacecar hahaha
That’s awesome man I’m glad it’s finally under way! Do you plan on cleaning up the engine bay like tuck it or anything? I know you said you’ll have to get a harness to make it work and I was wondering if you were going with a shaved bay or not. Either way I can’t wait to see the v5 in there instead of that headache of a motor lol good luck with it, can’t wait for the install videos.
Brandon Eberlin yeah currently I plan on the engine bay being pretty much the same as how I did the partial shave bay in my Jetta. Gonna relocate a few things, shave off brackets and tabs, and paint everything
Christian i saw a video on your channel of miley not getting reverse ?..I have the same car & also the same problem ..can you tell me what you did or what the problem was pls ?
Finally started my TH-cam build 😂 Thanks for the inspiration 🙌🏻
jamie_potgieter nice man!🎉
Im a subscriber😁
Left here to go watch your first video. Good job man . Now I'm back to this video haha
me & my cousin(master vw mechanic)use to do vr6 swaps into mk2 gti's 20 years ago when it was rare, and we never had a engine hoist we used dolly carts, dropped the engine& tranny on the cart & push em out
Watching your vids inspired me to buy a vw i now own a golf mk6 and mk4
That's awesome!
That cannister is your A/C receiver/drier. Swap is looking fire.
Nice thinking outside the box when it came to using the seatbelts in place of the chain.
I was expecting a weeks worth of vlogs for the engine removal and you managed it in a day . Very nicely done dude .Very nicely done . 👍 it’s going to be awesome watching you pull the VR5 out and fitting it in the Savoy with those sick engine mounts. That car will be so unique and cool when it’s done . Excellent as always Christian. ⭐️⭐️⭐️⭐️⭐️
weyland1000 pulling an engine out of a mk3 is surprisingly easy if you don’t run into any roadblocks which thankfully I didn’t lol appreciate the support man!🤘🏼
Christian Smith .No worries. Love your channel and content dude . .
Nice to see a good condition mk3. Ones up here in Norway are all rusting apart, and there's barely any left that hasn't holes in the canals, floor, strut towers, a-pillars etc.
Yeah!! That's bad ass! Looking forward to seeing these mounts and especially the harness that your getting. Is the mk3 power stearing going to work on the vr5?
Honestly I’m not exactly sure I know my power steering lines worked fine from the 2.0 to the Vr6 so I’ll have to see how the power steering pump on the v5 connects but I think it’ll work hopefully haha
@@Mk3Smith delete p/s. Way cleaner bay. A/c and abs also
niceeee.... looking forward to the clean up but most of all i can't wait to see the engine conversion kit going in👍👌
Hey, can you trie to install the front of milley(headlight,grill),on the Savoy?
Great job fast and easy,I hope I can pull mine that smooth. I'm going to do your old swap 2.0 to VR-6 for my MK-3 GTI Golf. You make it so simple.Great Job.
Yeah most of this engine are so simple.
Finally ! Took some time eh 😅
• MisterCRX • actually went pretty fast until I spent like an hour trying to find my triple square 😂 but for just chillen and no rush it went well
notice its the old Abs.... soo good job on cutting the loom. nobody is going to mis that P.O.S haha. birhgt side when you puleld the entire loom and ecu.. you just removed 13,7 ish kg. ;P #CusRacecar hahaha
That was a fairly smooth engine pull. I’m looking forward to this progression!!
Cool. Loved the detail to remove the front easily and without damaging anything.! Keep up. Peace
Nice! Worth the waiting. I want to get my cabrio abf swapped so this is a pretty good how to. Thanks man!
Pieter Kuijk of course man!
Finally, its happening... hope the install goes as easy as this!
Max Naidoo me too haha
Finally a TH-cam channel that actually does what it promises
Lawrence Ramaijane I try my best haha sometimes things take longer then I’d like but I try and get everything done 🤘🏼
@@Mk3Smith fact of the matter is you keep us updated and you deliver. We are thankful for you Man🤘👏👏
Dope. You crushed that!
That’s awesome man I’m glad it’s finally under way! Do you plan on cleaning up the engine bay like tuck it or anything? I know you said you’ll have to get a harness to make it work and I was wondering if you were going with a shaved bay or not. Either way I can’t wait to see the v5 in there instead of that headache of a motor lol good luck with it, can’t wait for the install videos.
Brandon Eberlin yeah currently I plan on the engine bay being pretty much the same as how I did the partial shave bay in my Jetta. Gonna relocate a few things, shave off brackets and tabs, and paint everything
Soo excited for the V5 conversion 😁
FFW Motor-Sport SAME!
I've been waiting for this for so long, it's the first video I'm watching tonight
Vr5 swap 🤩🤩 ufff
so ready for the build
Good Work Bro!! Cant wait to see more progress !
V5 sounds so good😍
So cool! How’s the top mounts in front of the Savoy? I mean since they are not real bushings, so it aint squeaking or anything?
Good luck on the vr5 quest
Great success 👌
We are waiting next 😊
Now listen to "Steelheart - She's Gone" and think of the 1.8 while listening xD
Keep up the. Wicked content bro 👊🏻👍🏻👍🏻
Get a 1.8T!! Would love to see you working on one and building it!
Is that v5 motor smoking????
What about the wiring harness? Are you gonna tackle that yourself?
v5 incoming!
Savy 5
so sick!!!
Did you teach yourself how to do swaps?
Finally
Which shock mounts do you use for your mk3?
So it's going to make Miley go a bit more faster? 😂
Christian i saw a video on your channel of miley not getting reverse ?..I have the same car & also the same problem ..can you tell me what you did or what the problem was pls ?
DRD content that was due to my shift linkage not being aligned properly. Once I adjusted it correctly the problem went away 👍🏼
@@Mk3Smith thanx much appreciated ...you should do a video on how to align shift linkage or adjust shift linkage lol.
So whats up with the back seats in the v6
David Hernandez what? Lol
hello good afternoon Smith hey a great favor do you think you can put subtitles on your youtube videos preferably in Spanish
Yes spanish titles👌
Well to bad start learning English
Delete all the things
Michael McCaw big facts