hi Hugh MAk , thanks for all your share, i'm trying to control a 96x96 P10 outdoor panel with RV801, but without sending card, direct LAN technique like, is it possible ?
Hi. I have TS802D as a sending card and receivers are RV901 and RV901H. Now one of RV901 has lost it's ability to transfer data stream forward.Thus it shows it's own picture good. I have new RV901H but I have no way to transfer RCG file from broken one to new ones. Is the only way to purchase TS901 sending cards? Or is there led set revision or some another way to transfer RCG files between card revisions?
@@Finnlander2 Hi, thanks for reaching out to me. If the one of the 901 shows its own picture good, you can use LEDSet to send mapping see if this works for you. If you still have a copy of RCG file in your computer, please send to the cards and re-mapping via LEDSet. If not, you need to make a new RCG file, no need to buy TS901. I hope these advises will help you!
Hello, ¿Param read back button not work with ts801 or ts802 Sender card? new version led studio 12.63 have de buttom in receiver options, but not work.
Only works with TS902 (seen in video)??? I need to readback a rv801D card to program two new cards, but that button appears inactive. I´ve got a TS801D sending card.... What can I do? I need the .rcg file
The following conditions must be met to use the readback function: 1. The 9th generation sending card 2. The 9th generation receiving card (firmware after 2017) 3. The 9th generation sending card has been used to send and save the rcg file before
@@markusbreitenstein8411 Hi, LVP515 is video processor I think, you can add my WhatsApp, send me pictures of your receiving card and sending card, then I will find out what firmware is good for you. Thanks
Good morning. In my LedSet software, the button to read data from the video card is disabled. What can I do?
hi Hugh MAk , thanks for all your share, i'm trying to control a 96x96 P10 outdoor panel with RV801, but without sending card, direct LAN technique like, is it possible ?
Hi. I have TS802D as a sending card and receivers are RV901 and RV901H. Now one of RV901 has lost it's ability to transfer data stream forward.Thus it shows it's own picture good. I have new RV901H but I have no way to transfer RCG file from broken one to new ones. Is the only way to purchase TS901 sending cards? Or is there led set revision or some another way to transfer RCG files between card revisions?
@@Finnlander2 Hi, thanks for reaching out to me. If the one of the 901 shows its own picture good, you can use LEDSet to send mapping see if this works for you.
If you still have a copy of RCG file in your computer, please send to the cards and re-mapping via LEDSet. If not, you need to make a new RCG file, no need to buy TS901.
I hope these advises will help you!
Hugh Mak.. does the param read back function work on RV902 cards. When i attempt read back i get a communication error.
I really want to learn from you, a lot of good things, I am not good at English but how can I learn some useful things about this software?
Hi, thanks for your comment, you can send me an email, then we can talk more about this, my email is hughmak928@yahoo.com
Hello, ¿Param read back button not work with ts801 or ts802 Sender card? new version led studio 12.63 have de buttom in receiver options, but not work.
Ledset is a new type of software of Linsn, the parameters read-back should use the new sender name TS952.
can u plz give as a link to download because i can't find it on linsn web page.tkx
Haykel Mahfoudhi Hi, you can download on Linsn website, the name of software is Ledset V2.6.0. www.linsn.com
OMG.... i was looking for on www.linsnled.com. thkx man
Haykel Mahfoudhi That’s not our official website
Only works with TS902 (seen in video)??? I need to readback a rv801D card to program two new cards, but that button appears inactive. I´ve got a TS801D sending card.... What can I do? I need the .rcg file
hello friend, I bought a TS921, DOES IT WORK TO GET THE RCG BACK?
The following conditions must be met to use the readback function: 1. The 9th generation sending card 2. The 9th generation receiving card (firmware after 2017) 3. The 9th generation sending card has been used to send and save the rcg file before
Hello Hugh Mak. I have some panels not working. but i can not read back the params. witch version did you use of LEDSet?
New version of LEDSet is no problem, but you need to make sure your sending card and receiving card are new firmware. 9th generation cards
@@ledadvices ok... so where can i get this firmware? its a LVP515
@@markusbreitenstein8411 Hi, LVP515 is video processor I think, you can add my WhatsApp, send me pictures of your receiving card and sending card, then I will find out what firmware is good for you. Thanks
@@markusbreitenstein8411 WhatsApp: +8618503087134
Which version from LedSet are you using?
V2.7