with the 90-95mm shocks you can probably achieve a very similar ride height by adjusting your spring compression, we also offer a 70-75mm version of this that might be even closer for you. check them out here: www.prolineracing.com/pro-spec-scaler-shocks/default.asp
I use the extended length shocks on my MOA too. I use Axial Capra 13mm X 70mm for single rate springs. I wish Proline would sell or guide us to the proper springs for both dual and single rate
I just recently bought these shocks for my 10.2. I used 30wt oil and these things leak like crazy. They're not overfilled, hydrolocking or anything. Just normal trailing and I can't keep oil in these things to save my life. Very disappointed and for $140 I was expecting silky smooth with no leaks. This ruined proline shocks forever for me. If you like very expensive, gritty, leaky shocks, then these are for you. If you want silky smooth shocks that don't leak, anything but these. I will probably just throw them away. No sense in trying to get a refund or sell them off.
Hi, Thank you for the question. We like to use 40-60 weight oil depending on the weight of the crawler. This may seem thick but since it's an emulsion shock, it needs some air in the oil to compensate for the shaft volume. When the air is mixed in during operation, it makes the oil effectively 20-30 points thinner.
Either finish designing the upper shock mount, or include a pair of washers with each set. I shouldn't have to provide my own mounting hardware on a pair of $60 shocks.
They look awesome but I barely saw them flexing while the truck was driving. At 1:21 was the best view of them. In all other shots, they looked stiff as a mo fo
I have a complete parts list for my axial scx truggy ... proline guys should do the same and post with with your crawlers because you have so many comments on your builds....👍👍👍👍😍😍😍
Is the shaft seal supposed to be taken out and put into the top cap threads on the top aluminum threads. My hobby shop says that is how they are made by proline. This video shows me that is not the case. Is this true who’s right Tell me my local hobby shop guys doing his job. 60 dollars for 2 shocks when we bought 4
Hi @RC Send And Blast, This video may clear up any confusion: th-cam.com/video/jNWwx_DUgBw/w-d-xo.html&ab_channel=Pro-LineRacing Thanks for your interest and support!
Stop being busy making ads you should make a video that explains how I fill these things with oil all the videos you have are different kinds of shocks and their all threaded on the outside and they all have bleeder holes and I don't know what I'm doing and these shocks suck
Hi @Shane lewis, We're sorry to hear of your unfortunate experience with our shocks. This is the correct video you are looking for that demonstrates how to properly fill The Pro-Spec Scaler Shocks: th-cam.com/video/jNWwx_DUgBw/w-d-xo.html Thanks for your interest and support!
Man these came out this long ago and I still don't have a set. I have some really nice proline power strokes on my slash 4x4, they are downright invincible. Take more abuse than anything else I own and never leak.
These would be a better fit for your Slash: www.prolineracing.com/performance-parts/power-stroke-shocks-front.asp www.prolineracing.com/performance-parts/power-stroke-shocks-rear.asp
Hello Manuel, I do not see the specifications for the exact length of the shocks for the exceed kit listed on their website. however, by looking at it, I would guess that they are the 105mm-110mm length, so part number #6316-02 www.prolineracing.com/performance-parts/pro-spec-scaler-shocks-105mm-110mm.asp
Purchased these in 90 to 95mm version. Filled with 50 wt oil to spec. Within 10 mins of running my scx10 around my flat front yard, all 4 are leaking. Pretty disappointed at the price and still leak. I had same problem with the first scaler shocks from proline. Was hoping for a "New and improved " shock. The shocks look great but functionality, hmmm? I emailed proline just now so we shall see what happens. I will update on my situation. Thanks
Hello William, very sorry to here about this issue. in your email to Pro-Line, please provide your shipping address, and pictures of your shocks. We will work to resolve the issue for you. Thank you for your support.
Oswalds Reef , you got it. I'm not trying to be critical but these shocks aren't cheap. I believe in you get what you pay for! I will give an update when I talk with proline. I did get a response from them saying I would be contacted shortly. We will see!
Thank you for commenting on my post. I really hope you all correct this issue and it doesn't cause bad reviews. I love proline products. But not sure you "hit it out of the park" (so to say). Thanks!
On the 105mm shocks can you take the top spring out for more droop?
Video for Shocks, everyone cares about the Cage
Wow that cage looks awesome.. 👍
Wow th-cam.com/video/S2g3sqyltOw/w-d-xo.html&pp=ugMICgJwdBABGAHKBRZzaG9jayBhYnNvcmJlciByYyAxLzEw
What kind of rear cage is that? I want one.
Dustin Renner 😉
Not telling, huh? I think proline would be crazy to not come out with several different cage designs.
Can you tell me what brand the suspension links are on that truck?
Those particular links are custom fabricated.
Pro-Line Racing it doesn't come up on the website
Will these fit my ‘16 F250???
haha, wouldn't that be nice! I think you might be able to mount them on there somewhere! haha.
nice bodyshell where to buy that
It's a Pro-line Hilux SR5 front half body.
My car has 80mm shock absorbers. installing these 95mm, will increase the height between wheel and body? or can it be adjusted to stay the same?
with the 90-95mm shocks you can probably achieve a very similar ride height by adjusting your spring compression, we also offer a 70-75mm version of this that might be even closer for you. check them out here:
www.prolineracing.com/pro-spec-scaler-shocks/default.asp
very thanks!
When a guy is new like me better off buying cheap Chinese shocks that are filled with oil
I use the extended length shocks on my MOA too. I use Axial Capra 13mm X 70mm for single rate springs. I wish Proline would sell or guide us to the proper springs for both dual and single rate
How about a oil fill and oil bleed video?
SHOP TALK Ep. 3 if I remember correctly goes into filling and bleeding the prospec scaler shocks
I just recently bought these shocks for my 10.2. I used 30wt oil and these things leak like crazy. They're not overfilled, hydrolocking or anything. Just normal trailing and I can't keep oil in these things to save my life. Very disappointed and for $140 I was expecting silky smooth with no leaks. This ruined proline shocks forever for me. If you like very expensive, gritty, leaky shocks, then these are for you. If you want silky smooth shocks that don't leak, anything but these. I will probably just throw them away. No sense in trying to get a refund or sell them off.
Using Team Associated Green Slime grease on the bottom seals fixes the leaking problem. 👍
Really cool shocks... gonna try to get a pair of 90-95mm for my trx4. What oil would you recommend? I’m also running the 1966 Chevy C10 body. Thanks!
Hi, Thank you for the question. We like to use 40-60 weight oil depending on the weight of the crawler. This may seem thick but since it's an emulsion shock, it needs some air in the oil to compensate for the shaft volume. When the air is mixed in during operation, it makes the oil effectively 20-30 points thinner.
Pro-Line Racing thank you so much! I’ll be sure to pick up some of these soon. Maybe start with 40 and go up. Thanks again!
Either finish designing the upper shock mount, or include a pair of washers with each set. I shouldn't have to provide my own mounting hardware on a pair of $60 shocks.
They look awesome but I barely saw them flexing while the truck was driving. At 1:21 was the best view of them. In all other shots, they looked stiff as a mo fo
I have a complete parts list for my axial scx truggy ... proline guys should do the same and post with with your crawlers because you have so many comments on your builds....👍👍👍👍😍😍😍
Cool shocks but what brand is that rc crawler?
Hi PhorzaSky,
We used and Axial SCX10 II.
Thanks for your interest and support!
Ohhhhhh that's very nice! Great job ProLine!
Is the shaft seal supposed to be taken out and put into the top cap threads on the top aluminum threads.
My hobby shop says that is how they are made by proline.
This video shows me that is not the case. Is this true who’s right
Tell me my local hobby shop guys doing his job.
60 dollars for 2 shocks when we bought 4
Hi @RC Send And Blast,
This video may clear up any confusion:
th-cam.com/video/jNWwx_DUgBw/w-d-xo.html&ab_channel=Pro-LineRacing
Thanks for your interest and support!
Spacer move over thread! Realy?
hmm never thought about that until now
Stop being busy making ads you should make a video that explains how I fill these things with oil all the videos you have are different kinds of shocks and their all threaded on the outside and they all have bleeder holes and I don't know what I'm doing and these shocks suck
Hi @Shane lewis,
We're sorry to hear of your unfortunate experience with our shocks. This is the correct video you are looking for that demonstrates how to properly fill The Pro-Spec Scaler Shocks:
th-cam.com/video/jNWwx_DUgBw/w-d-xo.html
Thanks for your interest and support!
Man these came out this long ago and I still don't have a set. I have some really nice proline power strokes on my slash 4x4, they are downright invincible. Take more abuse than anything else I own and never leak.
th-cam.com/video/S2g3sqyltOw/w-d-xo.html&pp=ugMICgJwdBABGAHKBRZzaG9jayBhYnNvcmJlciByYyAxLzEw ew
👍👍👊👊📹📹
Can i use the dual spring shocks for my slash i just want it to be smooth long travel for sand?
These would be a better fit for your Slash:
www.prolineracing.com/performance-parts/power-stroke-shocks-front.asp
www.prolineracing.com/performance-parts/power-stroke-shocks-rear.asp
90-95 or 105-110 for wraith?
How much for the rig
Nice shocks
Do you know Wich one will fit the Exeed mad torque. 1/8 ??
Hello Manuel, I do not see the specifications for the exact length of the shocks for the exceed kit listed on their website. however, by looking at it, I would guess that they are the 105mm-110mm length, so part number #6316-02
www.prolineracing.com/performance-parts/pro-spec-scaler-shocks-105mm-110mm.asp
What cage is that?
NICE!!
:)
Like that cage!
Purchased these in 90 to 95mm version. Filled with 50 wt oil to spec. Within 10 mins of running my scx10 around my flat front yard, all 4 are leaking. Pretty disappointed at the price and still leak. I had same problem with the first scaler shocks from proline. Was hoping for a "New and improved " shock. The shocks look great but functionality, hmmm? I emailed proline just now so we shall see what happens. I will update on my situation. Thanks
Hello William, very sorry to here about this issue. in your email to Pro-Line, please provide your shipping address, and pictures of your shocks. We will work to resolve the issue for you. Thank you for your support.
william stallings please do!
Oswalds Reef , you got it. I'm not trying to be critical but these shocks aren't cheap. I believe in you get what you pay for! I will give an update when I talk with proline. I did get a response from them saying I would be contacted shortly. We will see!
Thank you for commenting on my post. I really hope you all correct this issue and it doesn't cause bad reviews. I love proline products. But not sure you "hit it out of the park" (so to say). Thanks!
So what happened??? Did you fix them?
What cage is that I need one!!!!!!!!!
Jake _29 😉
Nice Find on that little Easter Egg Jake, coming soon.
Can't wait then iv been looking for a cage like this for a long time now, will finally be able to build what I have got in mind 😀
What rear cage is that