How to install Fog Light Kit 2010 - 2011 Toyota Prius [Step by Step Installation]
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Welcome back everyone! Today we will show you how to install fog light kit on a 2010 - 2011 Toyota Prius [Step by Step Installation]. This kit comes complete with wires, harness, bulbs and switch. Direct fitment for updating a broken or worn OEM component on your car. The fog lights are compatible for 2010-2011 Toyota Prius. This Fog Lamp works for both driver and passenger sides.
If you find my videos useful, informative, or entertaining, please like, subscribe and leave a comment.
Subscribe for more: www.youtube.co...
Tools needed:
Screwdriver
10mm socket
Fuse taps
Install time:
3 - 4 hours
Difficulty level:
Intermediate
Affiliated Product links:
👉2010-2011 Toyota Prius Fog Light Kit
Amazon: amzn.to/3F44lwX
👉Auxito Automotive LED Lighting - auxito.com/?re...
Auxito Coupon Code 15%OFF Use AUTOSENSATION
👉Akeeyo Dashcam - www.akeeyo.com...
👉Rove Dashcam: www.rovedashca...
🏪💳Our Amazon StoreFront (Most of the products we use in our videos)🏪💳
www.amazon.com...
👕👗Our Merch👕👗
www.redbubble.c...
Comment below and let me know if you added or just replaced your fog lights
Don't forget to like and subscribe so you don't miss out our future videos. The more subscribers we get the better and more content on other vehicles we can continue creating. Subscribe. Subscribe. Subscribe.
Check out more videos!
My latest video: • Latest Videos | Auto S...
Most Popular Video: • Most Popular | Auto Se...
Subscribe for more: www.youtube.co...
Follow Me!
Instagram: / auto.sensation
Facebook: / autosensationjr
Email: djmusicsensation@hotmail.com
#autosensation
Disclaimer: This channel is created for informational and entertainment purpose. I am not a mechanic or an electrical mechanic. Auto Sensation or myself will not be held responsible for any damages, injuries, losses or liabilities associated with anything you did to your vehicle/property whatsoever. Please follow your manufacturers guidelines and information in this channel is at your own risk. Note: Some of the links provided are affiliate links in which I may earn a small commision if products are purchased through those links at not additional cost to you. Thank for supporting our channel.
Music Credit
Sunbathers by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
![โรงเรียนดัดสันดาน นักเรียนเถื่อน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/vRKPeXn4Fl4/mqdefault.jpg)
👉2010-2011 Toyota Prius Fog Light Kit
Amazon: amzn.to/3F44lwX
Thanks man I got these fog lights in summer, installed them but without a switch but now I know how to install the switch thanks for the video!
Hi friend thanks for this helpful great video I installed successfully fog lights in my 2010 prius I really appreciate for your great vedio God bless you.
Glad this video was helpful
Odd how you just posted this right when I was in the market to buy and install foglights on my prius too,Lol!
Does the kit come with some kind of wiring diagram? If not where did you get the info of where to plug what to what and to what I should be tapping into?
Also why do you want to install those switchable lights from led to amber? Is that just cosmetic or does it allow better visibility in certain situations?
Yes. The kit does come with a wiring diagram.
Yellow lights cuts through fog easier. Less reflection.
@@AutoSensation I see, was this your own prius or a customers? I also am in WA and initially thought of installing the foglights because I have alot of trouble seeing and driving at night especially with fog. Im hopeing the new foglights plus a headlight restoration will help with the issue and now that you mentioned that about the switchable beams I may just try that? Will you be making a video of that too or is it just a simple bulb change for that?
@@uli3119 My wife's prius. Yes. I will make a video of the switchbacks.
After remote start, i will do this. Its in my list
I already have the fog lamps installed. Just need to change one blown bulb. Do I still need to remove the entire bumper cover like you did for a new lamp install?
No. Below the fog lamps. There is a clip and one screw to remove. Then you can just pull down on the liner and have access to the bulb.
Might help to jack up prius in the front too. But then again the bumper is so easy to remove compared to that stupid wiper cowl.
what is the "Male" Plug? on my one it has the positive, ground and position wire. What is the position wire?
Good, I plan to install my Prius 😊
Thanks for the vid. Got my lights installed but blown a 10amp fuse i got a spare 15 amp but there impossible to get out with out the fuse puller
Yeah. It is tough. Try a long nose pliers
Hi man, thanks for the video. Do you unplug the 12v battery first before this procedure? If you do or you don't, may you please explain why?
I heard that when you unplug a 12v battery in a hybrid, the system will be resetted-that could lead to decrease fuel consumption.
Thanks mate and all the best!
I did not. I just thought it wasn't necessary as long as I'm careful.
@@AutoSensation all right, thanks for the reply.
@~W.W.W~ disconnect anyway. U dont want to take a risk and turn the car back on and hv codes. The bumper harness is what i mean.
Did you make the video for the switch back amber led’s?
Unfortunately I did not
Hello Greg, I want install fog lights in a Nissan Kicks 23, Do you have any video about this car ???? 🤔
Sorry. Unfortunately I don't have a video for this car
Might want to disconnect negative battery terminal too beforehand cause their a harness connected to bumper that needs to be unplugged. JS
Hi, did you use micro or mini fuse tap holder?
Mini
Does this work for all gen 3 prius up to 2015?
2015 maybe a different size. Try this amzn.to/4dOXRAJ
Hey I got a fog light kit for my 2015 Amber ones to go into the grill like the jdm spec ones and it comes with no diagram I have 2 thick wires one positive and one ground around where the fuse box is and one small thin positive near the switch I am struggling to find a safe place to wire them in any advice?
How do you change the fog lights when the bulbs go out?
From the bottom. Just one screw to remove panel. Twist bulb counterclockwise to remove.
awesome video
Thanks
Thx
Housing isn’t made for LEDs. Terrible light pattern.