@ on mine I just held the brakes and bolt came loose. It’s just the clutch inner side is hard to come off the crank. The key came out with outer clutch sheave. Do I heat it up and tap off?
Mine was the same. Couldn’t find much info online and service manual made it sound like it should just come off. Heated and tapped a bit, but I pulled the snap ring off the inner sheave (probably shouldn’t do that?) but it did allow me to get a small 3 jaw gear puller onto back cover of clutch and pull in instead of hammer on it. Not sure if it is the recommended way to do it, but it worked. The machine I was working on was purchased second hand. Clutches had not been maintained and ceramic coating gone off 4 of 6 rollers. Wore both the groves rollers travel on and the cover. So now looking for new clutch… may do the clutch kit next year.
How did it work? Great video! I am close to getting this for my boy.
Waiting for snow to try it out.
Any updates?
@@samuraidougworks really good wants to get up and go with just a bit of throttle. Recommend it !
How do you get the clutch off? Mine is PITA to pull off
It’s a pain in the ass for sure. Had to rap a tie down around the unit to stop it from spinning and get the clutch bolt out.
@ on mine I just held the brakes and bolt came loose. It’s just the clutch inner side is hard to come off the crank. The key came out with outer clutch sheave. Do I heat it up and tap off?
Mine was the same. Couldn’t find much info online and service manual made it sound like it should just come off. Heated and tapped a bit, but I pulled the snap ring off the inner sheave (probably shouldn’t do that?) but it did allow me to get a small 3 jaw gear puller onto back cover of clutch and pull in instead of hammer on it. Not sure if it is the recommended way to do it, but it worked.
The machine I was working on was purchased second hand. Clutches had not been maintained and ceramic coating gone off 4 of 6 rollers. Wore both the groves rollers travel on and the cover. So now looking for new clutch… may do the clutch kit next year.
@ I got mine off, I just used a torch heated it up sprayed wd40 hammered the shit out of it with a 2x6. 5 of 6 rollers wore out