2006 GSX750F Suzuki Katana

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 19

  • @christopherthomas1508
    @christopherthomas1508 4 ปีที่แล้ว +4

    That plug is for a timer that only comes in the E33 models. All of the wiring harnesses are the same otherwise.

  • @marksoto6969
    @marksoto6969  4 ปีที่แล้ว +6

    Update, it’s been so long sorry. But the problem was a faulty fuel petcock it was clogged with debris from rust to gunk and carbs couldn’t suck fuel fast enough. I replaced everything when I should have started with process of elimination. My dumbass knew better but I jumped in head first.

  • @JasonBee-b6r
    @JasonBee-b6r 9 หลายเดือนก่อน

    The mysterious connection is for a fan and carb heaters on some European models I believe ... it's hot and if it grounds out will blow many fuses

  • @urbanhick0247
    @urbanhick0247 2 ปีที่แล้ว +1

    This is 100% a slow fuel flow problem. Check float heights, float valves, clogged fuel filters, vacuum leaks around petcock then make sure petcock is clog free and clean gas tank.

  • @urielordax9645
    @urielordax9645 ปีที่แล้ว

    Saludos ?Cuál fue el problema te gonina susuki gsxr 750 mod 89 con el.mismo problema como que las chispa está fallando y caliente se apaga en baja la chispa apenas se ve

  • @josephfischer9079
    @josephfischer9079 4 ปีที่แล้ว

    Hey mine has one too it's for a fan I believe

  • @thibaultalbertini8670
    @thibaultalbertini8670 6 ปีที่แล้ว +1

    Hi Mark Soto,
    I have exactly the same problem on my GSX1100G. And I come to the same conclusions.
    did you find the fault? Thank you

    • @marksoto6969
      @marksoto6969  6 ปีที่แล้ว

      Thibault Albertini ,,,,, Im sorry I thought I had commented on your status. I accidentally wrote it as another comment of mine. Scroll universe on comments you’ll see it. If not message me & explain problem. Thank you!

    • @thibaultalbertini8670
      @thibaultalbertini8670 6 ปีที่แล้ว

      Excuse me, I did not find your comment (well, I do not think) To make it easier, I subscribed.
      Thank you.

  • @Ikarrykids
    @Ikarrykids ปีที่แล้ว

    How do i remove the seat on this thing

  • @pedrocandelario8344
    @pedrocandelario8344 2 ปีที่แล้ว

    i got the same problem i put everything new i still has no spark did you thing the generator i can try is ?

  • @marksoto6969
    @marksoto6969  6 ปีที่แล้ว

    Thibault Albertini I ordered pulse coil, ignition coils. So far I’ve only gotten the coil packs & still waiting on pulse coil, I should get it today or tomorrow. I’m also in the process of cleaning gas tank cause it was rusted out. I spoke to a technician from Suzuki & he advised me that it was my pulse coil but I went the extra mile and gonna change out coil packs as well. I’ll keep you posted brother!

    • @thibaultalbertini8670
      @thibaultalbertini8670 6 ปีที่แล้ว +1

      I tested my pulse coil in the oven at 120°C but without success.
      On the ignition coils, I dismounted them, removed the wiring, cleaned the contacts and only changed the wiring. I checked cold and they are in good values but failure is always there when I ride. Like you.
      I await your reply impatiently.

    • @marksoto6969
      @marksoto6969  6 ปีที่แล้ว

      I sure will. I should get it tomorrow.

    • @marksoto6969
      @marksoto6969  5 ปีที่แล้ว

      It turned out to be the fuel flow not reaching carbs. I re lined the inside of gas tank with por-15 & put on a new fuel petcock, fuel filter & it worked !!! I bought coils, pickup pulse coil, for nothing. Smh. I sold my bike about 2 months ago. I miss it but I was going through a very difficult time. I have the data device manual if you ever need help.

    • @114wildfire
      @114wildfire 4 ปีที่แล้ว

      @Mark Soto
      I'm having the same darn problem.
      I notice when I put vacuum from a pump to my petcock that fuel doesn't come out

  • @greensparks415
    @greensparks415 4 ปีที่แล้ว +2

    Dud I can’t watch your video because of that dam noise in the back round