New update DJI Mini 4 Pro V01.00.0800 with Gimbal problem

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 51

  • @shaunthedrone
    @shaunthedrone  9 วันที่ผ่านมา +4

    Be great to hear from anybody else that has noted any problems with the latest firmware update for the DJI Mini 4 Pro

    • @Moto_GeeTee
      @Moto_GeeTee 8 วันที่ผ่านมา +1

      Shaun, i figured something out. I guess the problem on that gimbal tilting up after rocket shot in descent. Is based on the tracking. Why? Because I tried tracking the ground, not me or the person, the gimbal now never tilts up upon descent. Since the active track cannot track the person above 15meters ish, the gimbal is like having a hard time where to track. Just my guess. I have tried it after watchingn your video.

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา

      @@Moto_GeeTee could be right as it does say near the end it's looking to track

    • @harleydavidsonroadking9648
      @harleydavidsonroadking9648 8 วันที่ผ่านมา +1

      I will just skip the latest update, and wait for the next one...

  • @Moto_GeeTee
    @Moto_GeeTee 8 วันที่ผ่านมา +3

    Thank you shaun for testing it out. I hope dji will check on it.
    Some users fixed the issue after updating its firmware to the latest, but mine did not (read it on the comments in this video).
    Did all the stuffs dji had told me.
    Refresh firmware, calibrate gimbal and IMU, but the issue persist.
    Anyway, as long as the quickshot is done without interruption, still usable.
    Thank you so much shaun again. Safe flight. To more videos! Cheers! 🍻

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา

      Many thanks for your comment and yes, some say there is fixed and us, it's still the same? I'm sure there will be another update to sort out any other bugs - many thanks for watching

  • @gama45
    @gama45 8 วันที่ผ่านมา +2

    Thanks for the video Shaun. I had watched Kev Roberts', and other videos about this gimbal problem with the Mini 4 Pro and RC-2 also, so I checked mine. I hadn't updated it in a while, with all the problems showing up, so it was on Aircraft Firmware 01.00.0700, so I had it do a rocket. Sure enough, the gimbal pointed up. So I did the update to V01.00.0800 and did another test, and it's fixed! Yay! Thanks Shaun!

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา +1

      Many thanks for your comment and good to know it's on a later update but I did mine with the latest update and still the same even with the DJI RCN2 latest update??? Not a problem but interesting test - hope DJI are watching Gary

  • @richardhykes6939
    @richardhykes6939 9 วันที่ผ่านมา +3

    I'm gonna give that one a try mate. Keep on flying my friend. GIT ER DON. !!

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Let me know how you get on with it Richard - hopefully yours is okay

  • @RonaldBrown59
    @RonaldBrown59 6 วันที่ผ่านมา +3

    I haven't flown the Mini 4 Pro in awhile, I have been busy with the Air 3s. Sorry your have trouble with the Rocket quickshots, I hope they get it sorted out with the next update. Insteresing that it only happens with the DJI RC 2 controller. Thanks for sharing.

    • @shaunthedrone
      @shaunthedrone  6 วันที่ผ่านมา +1

      Thank you Ron, it's just something minor and I'm sure DJI will sort it on the next update. Many thanks for watching.

  • @shaunmk
    @shaunmk 9 วันที่ผ่านมา +2

    perfect test Shaun...good video

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Thank you Shaun, glad you enjoyed the video and thanks for watching

  • @chriscapune7873
    @chriscapune7873 9 วันที่ผ่านมา +2

    Great tests!! I like to watch Kevin. He is very entertaining and informative. Lots of times on what not to do. 😅 and that is always good to know!
    🐾🐈‍⬛👍👏🍻

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Thank you Chris, have to agree, Kev makes a great channel and love his tests - many thanks for watching

    • @chriscapune7873
      @chriscapune7873 8 วันที่ผ่านมา +1

      👍🐾🐈‍⬛🐝👍

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา

      @@chriscapune7873

  • @terryrccrazy6993
    @terryrccrazy6993 9 วันที่ผ่านมา +2

    Thanks Shaun, sometimes funny stuff happens

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา +1

      Thank you Terry, always Many thanks for watching

  • @yogiparashara4016
    @yogiparashara4016 9 วันที่ผ่านมา +3

    Great video buddy 😊

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Thank you Yogi, glad you enjoyed the video and thanks for watching

  • @WeretheRoberts
    @WeretheRoberts 8 วันที่ผ่านมา +2

    Heck yea, man. That was a great demo. It’s funny how that camera does that. It’s almost like the mini 4 pro gets confused easily like me. Haha. Oh, and your excuse for using auto RTH is my logic, also. Being lazy is fun! lol.

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา

      Many thanks Kev and thanks for your test with the Mini 2 (Rose) worked fine. RTH I love - press the button - many thanks for watching

  • @CGDreamsTutorials
    @CGDreamsTutorials 8 วันที่ผ่านมา +3

    Quick glance at the video it seems its dependent in how close the drone is to you when your start the rocked as to how far down the gimble needs to point down. When it goes to its limit is where it flips up coming down. Try doing test closer, then further away see if its is the issue.

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา

      Many thanks for your comment and I did try this, DJI RCN2 wouldn't let me fly close for the rocket and some say this has been fixed with the update and some like me, has this problem. Many thanks for watching

  • @flywithmetrevor
    @flywithmetrevor 2 วันที่ผ่านมา +1

    ❤Great video Shaun, very informative. I have a similar problem with my Mini 3 Pro where when your increasing altitude the gimbal starts to slowly move downwards. It’s definitely a software issue so I have to counteract it with the gimbal wheel which is annoying. I was hoping an update would fix it but it’s still there for the time being and no idea how to resolve it 😊

    • @shaunthedrone
      @shaunthedrone  วันที่ผ่านมา +1

      Hi Trevor, I'm hoping you mean your Mini 4 Pro and not the Mini 3 Pro? DJI have stopped doing updates on the 3 Pro now. Many thanks for watching.

    • @flywithmetrevor
      @flywithmetrevor 21 ชั่วโมงที่ผ่านมา +1

      @ Unfortunately I did mean the M3P. I might try and factory reset it when the M5P comes out or if I get any more impatient the M4P lol.

  • @bradroberts8629
    @bradroberts8629 9 วันที่ผ่านมา +1

    Thanks Shaun

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา +1

      Many thanks for watching

  • @pp2trancos
    @pp2trancos 9 วันที่ผ่านมา +1

    Aterriza en la plataforma porque sabe que Minnie lo está esperando

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา +1

      Todavía vuela bien pero a veces no

  • @kev_999
    @kev_999 5 วันที่ผ่านมา +1

    Wow. Ill have to try this. I'm in Guatemala and they don't have DJI care here.

    • @shaunthedrone
      @shaunthedrone  5 วันที่ผ่านมา +1

      Thank you Kev, give it a go and see if you also have this problem - many thanks for watching

    • @kev_999
      @kev_999 3 วันที่ผ่านมา +1

      @@shaunthedrone I went on a long journey today found a way south around the airport block zone and got some unreal shots of Guatemala City. I just have tons of footage and a macbook air 8gb ram and have a new macbook pro m4 48gb ram back in FL to have someone bring or I'm almost at end of visa anyway. Until then, I need a video editor. Smh

    • @shaunthedrone
      @shaunthedrone  3 วันที่ผ่านมา

      @@kev_999 well done Kev, I use Final Cut Pro, once you pay, it's for life even with the updates - good luck with the editing

  • @fj1100mark
    @fj1100mark 8 วันที่ผ่านมา +1

    I think that the RCN2 update was the fact that they made it compatible with the Neo

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา +1

      I think you're correct Mark, many thanks for watching

  • @garylinnane917
    @garylinnane917 9 วันที่ผ่านมา +2

    You don't have to wait. I just fly up 7 metres and fly straight forward and whatever direction, and it lands directly where I took off

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Good to know Gary and I'm sure I will be making another on the landings

  • @justamanandhisdeuceandahal5399
    @justamanandhisdeuceandahal5399 9 วันที่ผ่านมา +1

    Have you already tried to recalibrate the gimbal? Seems like it is trying to move further than it can. Just curious what happens when you manually rotate gimbal to -90 degrees? Does it show it is at 90 degrees? Anyway I love your videos and cant wait to find out what you find out.

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา +1

      I be honest I didn't try to calibrate the gimbal but others have tried that and still the same problem. Some have said the problem has been fixed and some like me, not. Many thanks for watching

    • @justamanandhisdeuceandahal5399
      @justamanandhisdeuceandahal5399 8 วันที่ผ่านมา +1

      @shaunthedrone yes after thinking more...if the gimbal only does that after the automated missions then it would be a programming issue...

  • @TheMazajjee
    @TheMazajjee 8 วันที่ผ่านมา +1

    Hi shaun, and thanks for posting this video.
    After updating my M4P to V01.00.0800, the gimbal started to slowly tilt down on the left side before takeoff. I have made gimbal calibration automatically and manually, but the same problem comes back again before taking off. I don’t know if any one got the same problem?

    • @shaunthedrone
      @shaunthedrone  8 วันที่ผ่านมา +1

      Hopefully someone will read your comment and may have the same problem, next time I'm out I will look out for this - many thanks for watching

  • @garylinnane917
    @garylinnane917 9 วันที่ผ่านมา +1

    The update cleared an issue I had, and now I have a new issue with quick transfer on my android phone. My home wifi keeps disconnecting while transferring photos and videos, and wifi simbal even dissappears from screen. Everything else that is connected to the house wifi is working completely fine. Tried the quick transfer on a tablet and was also doing the same thing. Never had an issue before like this ! 😢

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Many thanks for the update Gary, I haven't got a android phone but have android tablet - will check it out

  • @CTArial1979
    @CTArial1979 9 วันที่ผ่านมา +1

    4:15 Mini 4 pro

    • @shaunthedrone
      @shaunthedrone  9 วันที่ผ่านมา

      Many thanks for watching

    • @CTArial1979
      @CTArial1979 7 วันที่ผ่านมา +1

      @@shaunthedrone I love your videos :)