First one showed missing parts. Second one was complete. It's a working bench grinder th-cam.com/users/postUgkxxC8HPnl24fu0XhMU_nbmWNEUoK1RMHXk . One thing I like alot is that it's surprisingly quiet. I don't feel like I'm sacrificing any rpms or power for the quietness either. All in all it's a very nice machine. No vibration whatsoever.
Really fantastic restoration! One suggestion: please do not put the finished product in thumbnail! It will make your subs and also new viewers more curious to see the result in the end!
It's nice to see that he uses a WOODEN mallet instead of a metal one for pushing down the replacement bearings. I've seen a few TH-cam resto shows who go metal on metal and i'm like "NOOOO don't do that!"
LMAO if the shape of that was fine and didn't need the repainting, after placing the switch, this would've been the shortest restoration ever. Still, good work. That new metallic paint makes it better than factory.
Please tell us a little more about the tool puller bearings. I liked him. There is a desire to make one for yourself. Thank. Anatoly. Krivoy Rog. Ukraine.
Shame to use it, and make it dirty again. Nice clean refurbishment, but wouldn't rate it as a restoration, but that's just going by my definition of the word "restoration"..
This is by far the cleanest and least used restoration subject I've seen.
First one showed missing parts. Second one was complete. It's a working bench grinder th-cam.com/users/postUgkxxC8HPnl24fu0XhMU_nbmWNEUoK1RMHXk . One thing I like alot is that it's surprisingly quiet. I don't feel like I'm sacrificing any rpms or power for the quietness either. All in all it's a very nice machine. No vibration whatsoever.
Just one word... Excellent 👍
Молодец! С огромным удовольствием смотрел на твою работу!
Спасибо, я рад слышать это.
wow nice Bench Grinder Restoration | Toshiba bench grinder CBG-150D
Thank you :)
@@gear_show welcome
Your dedication is admirable another great vid well done 🇬🇧
Thank you sir!
Very good restoration 👍👍👍
That's a nice, little bench grinder - great job. 👍👍👍
Thank you sir 🙏🙏🙏
Toshiba makes some of the nicest portable bench grinders. Wish they sold them in my part of the world...
Thank you for this beautiful restoration
You're welcome, thank you!
Really nice restoration 👍🏼👍🏼
Thank you 🙏🙏
No need mechanical replacement, still usable actually. Good effort 👍🏻👍🏻👍🏻.
Thank you!
Круто!Сначала лайк, потом просмотр)
Really fantastic restoration! One suggestion: please do not put the finished product in thumbnail! It will make your subs and also new viewers more curious to see the result in the end!
It's nice to see that he uses a WOODEN mallet instead of a metal one for pushing down the replacement bearings. I've seen a few TH-cam resto shows who go metal on metal and i'm like "NOOOO don't do that!"
Well done. Ps no need to apologise about any mistakes in your descriptions ....of any of your videos. Your talent ...your tools.
Fantastic restoration
Very Good Restoration
Hi Gear Show 👋👋👋very good restoration grinder 👍👍👍and video cool 🤝🤝🤝
Hi Кошмар Кошмар 👋👋👋Thank you 🤝🤝🤝
Beautiful! Keep up the good work and videos!
Thank you!
Class 1 appliance.....needs earthing...🇬🇧👍
The screw he put in at the back was for the earth.
It seems to rain a lot in your prefecture. I wish it rained here. Nice work by the way!
Yes It rains everyday, thank you!
so cool !
Nice work
なかなか良い感じですね。
You ned a SandPistol for remove the Paint and Rust 🤘🙂🤘
very good job!!
Awesome job! You're an inspiration for DIY! Congrats!
Thank you!
Boa noite Like
Uses a brench geinder to repair bench grinder very smart
LMAO if the shape of that was fine and didn't need the repainting, after placing the switch, this would've been the shortest restoration ever.
Still, good work. That new metallic paint makes it better than factory.
Yes, thank you!
Good job 👍
great
Overall nice work. Not sure why you kept that nasty melted and chewed up switch rather than replace it with a new clean one.
При первом включении начал плясать на столе, при втором стоял вкопанным. Что за чудеса? Автор утаил балансировку?
Hope you replace that switch. Seemed obvious it was bad. Otherwise nicely done.
Well done.
Thank you!
Very good
I am Japan again
Your vids are pretty good though
круто=)
Hey man, where are you picking these old tools up from? How much are you paying for them?
Harika oldu
tip next time chuck the small screws in a vinegar bath then you don't have to clean every individual screw
Just perfecto !!
do a good job , new workshop??
Cặp bạc mới không bao giờ bằng bạc cũ
Кнопку починил, тоже мне реставрация
Good good
Please tell us a little more about the tool puller bearings.
I liked him. There is a desire to make one for yourself.
Thank.
Anatoly. Krivoy Rog. Ukraine.
There are many of them on the market, I bought it from my local market (china product). It call bearing puller.
Thank.
Good 👍👍😃
This really just needed wiring and a paint job.
I might of missed it, but is he/she coating the fasteners with anything to stop them from rusting?
10:50 what you use type paint this is hammer paint or other ?
He pulls the cover off the bottom and the switch is inside and turned off. Was I the only one who said "well there's your problem ...right there"?
Ok buddy
Like, Brasil.
Thank you!
painful to see that krusty garbage switch get put back on it.
Very nice! I love your work.
At 16:21, what is the purpose of the screw you inserted?
Thanks!
This is the earth connector.
What you doing with al the restore products
You rock!!!
What is the price of this new grinder machine
جيد جيد
Do you like made in Japan?
👍🏻
🇨🇴👍🏻
Why put on the eye shield they get all dirty and you can’t even see well I just wear safety glasses when using one.
This the restoration, I need to make it like from manufacturer.
元の色よりいい色だな。
master, are you a mechanic, are you doing someone else's things?
10:28 LA CUCARACHA
في الدقيقة 12:55 نسيت المثبت الصغير
OK
👍😎☕🍩🔧🔨🎏
Не особо-то здесь нужна была реставрация.
Shame to use it, and make it dirty again. Nice clean refurbishment, but wouldn't rate it as a restoration, but that's just going by my definition of the word "restoration"..
alumium from Taiwan look so bad. made in japan is the best
i wonder how you can see quality of aluminum ..but if you refer to those imperfection in cast, those holes he had to file to be round, i understand :D
👍🏻🇪🇨
3:33 Gosh, your mom will smash your back ;(
Haha, really! I won't let her know.
Grinder repaired and working within the first minute. The rest was completely unnecessary. But good job all the same.
Very good restoration 👍👍👍
Awesome!
Thanks!