XP Deus 2 WS6 Master Legacy Program
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This video will show you how to put the Legacy Program onto your WS6 Master puck so you can go out and use it while searching for treasure with your XP Metal Detector.
The Lagacy program is a well thought out 'turn on and go' custom program that aims to embrace iron falsing rather than try and mask it.
The program has been tested all around the world and is the prefect choice for most types of ground where you want to maximise your finds potential in your search for deep targets.
For a demonstration of this program out in the field watch this video here:
• XP Deus 2 Legacy Progr...
Don't forget to drop a like and comment below if you found this video useful.
Well that program work on dry sand as on the beaches. Many thanks from sunny Cornwall 😊
Cheers Michael used yesterday on pasture been doing long while two areas very noisy from iron n mineralised soil put reactivity up to 4 must say worked really well . Few buttons decimal coins including little half pence easly tell rubbish signals all the best Michael
@@bobbybaker1060 that’s awesome Bobby! Glad it’s working well for you. I have also noticed that reactivity on 4 can make it more stable in noisy sites. If the ground is clean you can also go down with it too. ATB 👍👍
Love the program 2 cut half’s in a hour and a silver thimble. Keep up the good work
@@Chelseaf.c-b2t woah! Awesome finds mate. I bet those cut half’s sounded bigger than they were too. Thanks for the feedback 👍👍
@@OMA_MetalDetecting both no deeper than 6 inches. Solid signal 73
Thanks for this video! I've already programmed this into my RC now it's on my puck. I'm going to try it this weekend.
@@dcmdetects good work buddy! Please do drop by and let me know how you get on over the weekend with it. Good luck 👍👍
Brilliant. Been waiting for this video since last week ❤will get this on my puck tomorrow. Can’t wait to give it a whirl. Many thanks, Claire 🙏 x
@@MakingItOutOfTheWoods good luck Claire! Hopefully it’s dryer where you are but if you manage to get out be sure to let me know how you get on. Michael 😃👍
@@OMA_MetalDetecting Scottish Highlands - so don’t hold your breath! Ha! But will let you know for sure x
@@MakingItOutOfTheWoodsdon’t forget to pack your diving suit 😂😂
@@OMA_MetalDetecting 🤣🤣
i adjusted your legacy settings at general,and deus mono also too.they work perfect.
@@giannispap16 that’s a great idea! Let me know you find them and I may do the same 👍
All programmed in ready for tomorrow I haven’t been out on my permission for 6 months 1 st dig with my deus 11 lite can’t wait top banana 🍌
Regards Daz
I don’t normally use other people’s settings but I’m out tomorrow in an area where I’m cursed and always do terrible so I will give them a try and see if they break the curse 🤣
I also usually only use the square tones but will go with the full recommended set up. Cheers
@@TheDivvyDetectorist no issues at all using square tones so stick with that if that’s what your used to, it will do the same job mate. Remember, if it sounds remotely dirty it probably is. Can’t promise it will break that curse though but if it’s there this program will find it. Good luck 👍👍
Thanks for information.
@@ohiofredl my pleasure. Let me know how you get on with it 👍👍
Thanks for this buddy
@@user-ki2jw1pw3i no worries daz, go find those hammies 👍👍
Buenas noches e probado el programa, tuve problemas com monedas muy pequeñas , otro problema que tengo es que yo ando muy despacio y parece que el balanceo necesita que sea más rápido. ¿ que puedo hacer para adaptarlo a mi forma de balancear que es más lento? Muchas gracias por leerme
Hi m8 what version im currently on .07 is best for this programme
I would recommend firmware 1.1 or 2.0 for this program buddy as that is what it was designed around so has not been tested on 0.71
@@OMA_MetalDetecting ok cheers ill try 1.1 thanks
Thank you for this smashing wee video .. i have a question .it maybe a stupid question .sorry in advance will we not get Iron falsing with the Iron sound down to zero .. thanks
@@user-nm9hw6sw4m no question is a silly question Steve! The legacy program bypasses the conventional iron discrimination in favour of specific tone breaks aimed at precise target separation. You will hear iron but it will sound broken where as good stuff is clean and repeatable. Give it a go 👍👍
@@OMA_MetalDetecting going to use it this weekend .. many thanks
this is going to be a game changer .. i think lol
@@OMA_MetalDetecting what version is best with this program I'm currently using. 07
@@darrenkeen3646 This uses the individual volume control for every tone break, which is on v1.0 1.1 and 2.0.
You dont have it on 0.71
Hi buddy I went out today for the 1 st time on my permission with the deus 11 lite using the legacy program but it was very chatty is there something I need to change it was noisy near over head power lines ?
Would this be for 1.1 version
Legacy settingg
@@lukelilfella6833 1.1 or 2.0 will give you the best optimal performance for legacy 👍👍
Thank u mate top man
Just had a bronze axe head
@@darrenkeen3646 oh wow! Really? Now that’s a ml ent you won’t forget in a while. Congrats 👏👍
@OMA_MetalDetecting with the new settings.. I have been over the plot loads with all different settings it was about 7 inches deep absolute banging signal
When I go to save it, it keeps asking me to ground balance and won't save. Any ideas?
@@mitchellaugustas7105 make sure you are in the program menu then hold down the button to save the program 👍
Hi! Will be doing some archaelogical search this weekend. Question: For small thin gold. Do you think 40khz and lowering tone break no2 to maybe 30 is an idea?
I will report the results next week in a comment.
👨🦯🙏
@@SpitfireExtra hi 👋 thanks for your comment. I would agree that both of those options would increase your chance of finding small things gold but maybe try around 33. I may also add putting bottle cap discrim on 0 aswell as that will have an adverse effect on anything shiny like modern coins etc. sounds like an interesting hunt. Good luck buddy 👍👍