Klipsch RP-500SA Elevation Atmos Speakers - Unboxing and Overview
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Klipsch RP-500SA Elevation Atmos Speaker - Unboxing and Overview. Klipsch's All-New Reference Premiere RP-500SA Elevation speaker can be used as an up-firing immersive speaker for Dolby Atmos, a height speaker or a rear surround model all with the flip of a switch. Buy the RP-500SA Here - amzn.to/2CEkTeL
Thanks to Klipsch for Sponsoring this video series on the New Klipsch Reference Premiere Speaker System
Music by www.hooksounds.com - "Summer Journey"
----
Klipsch All-New Reference Premiere Speakers:
Floorstanding Speakers:
RP-8060FA w/Atmos: $1099 - amzn.to/2LB6Ppj
RP-8000F: $599 - amzn.to/2So7bC3
RP-6000F: $499 - amzn.to/2BGPBC4
RP-5000F: $374 - amzn.to/2SuzWNK
RP-4000F: $299 - amzn.to/2BLeg8G
Center:
RP-504C: $649 - amzn.to/2LCbJlO
RP-404C: $549 - amzn.to/2BNvwdB
RP-600C: $499 - amzn.to/2BOTyVl
RP-500C: $369 - amzn.to/2BLxURT
RP-400C: $299 - amzn.to/2BIGota
Bookshelf:
RP-600M: $549/pr - amzn.to/2RjY4oH
RP-500M: $419/pr - amzn.to/2BLveUA
RP-400M: $349/pr - amzn.to/2rYFZyj
Surround:
RP-502S: $799/pr - amzn.to/2BOXN3A
RP-402S: $599/pr - amzn.to/2CDQgpU
Atmos Elevation:
RP-500SA: $499/pr - amzn.to/2CEkTeL
Subwoofers:
R-115SW: $899 - amzn.to/2VgILw5
R-112SW: $519 - amzn.to/2SrEEf8
R-110SW: $439 - amzn.to/2So6rgo
-------
Subscribe to this Channel: goo.gl/YEJ23p
My Recommended Products - kit.com/Youthman/
Youthman Merch - teespring.com/...
Follow Us:
Facebook: / youthmanreviews
Instagram: / youthmanreviews
Twitter: / youthmanreviews
Visit the Website: youthmanreviews...
_
My 7.2.4 Dedicated Home Theater System:
Speakers:
(3) Klipsch LaScalas - amzn.to/2LhHLH0
(4) Klipsch RS-62ii - amzn.to/2ET4R2w
(4) Klipsch CDT-5800-C II Atmos Speakers - amzn.to/2NzK9oU
(2) SVS PB16 Ultra Subwoofers - www.kqzyfj.com/...
Video:
Epson 5040UB Projector - amzn.to/2Ace6ak
150" Seymour Center Stage XD Cinescope (2.35:1) Acoustic Transparent Screen
PS4 - amzn.to/2C74L6B
AppleTV
Audio:
Marantz SR8012 11.2 Dolby Atmos 4K Receiver - amzn.to/2A4WEXX
Misc:
Harmony Elite - amzn.to/2CvHM3Z
CB Concept SMD5050 LED Lighting - amzn.to/2DKws2S
__
My Klipsch LaScala Trio Home Theater Video Tour - • Klipsch LaScala Trio H...
LaScala Trio Home Theater (Version 2.0) Build Thread - goo.gl/YShhGf
High Res Photos of the LaScala Trio Home Theater - goo.gl/BzAQkq
___
Disclaimer: Affiliate Links are used in the description of this video. By clicking on the above links, it helps support this channel by providing me with a small commission which allows me to produce better content for you and the rest of my TH-cam Audience. Thanks for watching!
Honest to goodness the production value of your videos is so much better than any other HT content creator out there. Inserting those high quality still pictures make seeing those Atmos modules much more clear than simply zooming with a a video camera.
Thank you kindly. I do my best.
Why no review of these as on wall front height speakers?
What does that Atmos vs Surround switch actually do on a technical level?
I have 4 of these and there all wall mounted left in Atmos via the switch at the back of the speakers, works awesome
HELP! The Klipsch specification sheet for this speaker is written in Dolby code! For: 1) Frequency Response, 2) Sensitivity, and 3) Crossover Frequency - the answer is “Conforms to Dolby Atmos Specifications”.
Great, what does this actually mean? Klipsch’s are known for being highly efficient speakers. Do these speakers follow their historic legacy or does this labeling hide a break from their past? I’m glad Klipsch is sponsoring this testing of these speakers so I hope they will get you (and your viewers) the actual specifications! I’m seriously considering these for future front wide, side, and rear surrounds.
Plus, how does the “switch” change the way the speaker functions? Do these three categories have different answers depending on which mode is switched “on”? Thanks in advance for getting these answers! Keep up the good work!
Bruce Rider I swear I have the SAME questions you have,I’m trying to decide on these or the SVS prime elevations.i don’t like that klipsch put that switchable crossover in these,And that’s why I’m leaning HEAVILY towards the P.E.’s because there is no Hiding of crossover frequencies in their speakers,they are FULL RANGE height speakers that play down to 55hz which is PERFECT for a height speaker. According to the klipsch manual if you use it in Surround mode you set the crossover to 80hz if you’re using them in Atmos mode you set your crossover to 150hz and that’s WAY too high for atmos,the sweet spot is 100hz or even 90hz if you’re speaker can handle it.i actually think after reading all that I just wrote I think I’m going to go with the primes lol
Hi Bruce and jbmatthewz, I reached out to Klipsch with your question and just received this email from them on the RP-500SA speakers. Hope this helps!
"Dolby requires very specific sensitivity, frequency response curve, and cross over frequency in order to pass Atmos certification for an elevation speaker.
While I can certainly confirm the RP-500SA is true to the Klipsch tradition of high efficiency, incredible dynamic range, and flat frequency response, we felt publishing these specs did the performance of the speaker a disservice - as these are the specs required by Dolby for Atmos use.
That said, the surround/Atmos switch actually changes the crossover network to adjust the response of the speaker for surround or Atmos elevation use. In Atmos mode, the speaker is voiced at conform to the specifications mentioned above. In surround mode, however, the speaker is able to have a much flatter, broader frequency response - more true to the source material when directly fired into the room."
Michael Buratto
Product Manager
Youthman, somehow I knew you would go straight to the source! Thank you for getting this reply to my question! Because I intend to use these as surround speakers, I’ll be sure to “flip the switch” when they arrive. I’ve owned Klipsch for over 25 years and I look forward to add Dolby Atmos in my home!
You are welcome. Let me know how you like them. Hoping to get them setup next week to try them out.
Youthman did you ever try them out? Why no full review?
Another great review. Even though I am not a Klipsch person. I do have ceiling speakers that fire down on the listening area for my Atmos setup. Which in my opinion will always sound better than the bounce speakers.
I agree. Dolby recommends In-Ceiling as the best method but not everyone can or wants to cut holes in their ceiling so these make a very convenient way for people to add Atmos to their setup. Curious to see how they sound
I currently have two Klipsch RP-140sa. Used as Front UpFiring Atmos speakers. I experimented a lot with their positioning. I placed them about 18 inches from mid speaker to the back of my 65 Z9D Display. Cutoff at 120Hz. UpFiring 38 inches from mid speaker plate to top of my ceiling. I tried more traditional distance to ceiling top but had dramatic improvement with 38 inches. They sit on adjustable height speaker stands. Today I placed an order for the two Klipsch RP500SA. Can't pass up 75 watt RMS, 300 watt peak
I like to say I hear essentially no horizontal sounds coming from RP140sa for if there were any the back of my Z9D would block them.
Everything front Atmos I hear is from the ceiling bounce. My setup is 5.1.4 with SVS 2000 Subs
Sounds like you have them dialed in quite nicely Larry
@@Youthman My Klipsch RP-500SA arrived home today. Box sitting on the Living room floor now. UnOpenned. Box is pristine except for 4 inch open slit that looks was caused by wire wrapped into it. Slit perpendicular to midpoint edge. Ha Ha. Guess I rather have that then a golfball hole in it. Thanks for you making ALL this Happen.
Another home for the 500.
I've Klipsch R-41SA speakers in the ATMOS config each on top of a pair of Klipsch RP-400M's in a 5.1.2 config. Rear surrounds are also RP-400M's sub is a R-100SW
Is the 8060 the 8000 but including a built in 500s? Or is the standalone 500s a uniquely different speaker?
If they sound anything close to how awesome they look, they must be awesome.
Thanks Pete. Looking forward to finding out
I have 2 of these on my front wall and am thinking of putting another pair against the back wall...problem is my single chair is against it. Would it be worth it or would all the effect just go "over my head", so to speak? Currently I have a 7.2.2 system with 4 Polk satellites surrounding my seat and my front LRC are Klipsch with Polk 10" and Klipsch 12" subs. I would have to add a separate 2-channel amp in order to use the extra pair of RP500SAs with my X4700 (if I read the instructions correctly). I can't/don't want to do ceiling mounts.
SVS Prime Elevation speakers seemed to be the way to go vs. trying to bounce sound off of my ceiling. I wouldn't mind swapping out Klipsch brand to match the rest of my speakers but want to make sure I'm getting the same quality sound.
Still waiting for your review about these when sitting on top of the mains. I am about to pull the trigger next month and buy four of them.
? I currently have (2) R-820F, (1) R-52C, (2 Pair) R-51M, (1) R-120SW but want to add the Atmos speakers, what would pair best with my current setup the R-40SA, R-41SA, or RP-500SA.
Can't wait for the review. I plan on adding these to finish my 5.2.4 set up. I am confused about the switch on the back, do I set as Dolby or surrounds? I plan on hanging them on my wall. These speakers look great but a bit confusing as to where to set them as frequency 80 100 150? ugh, might have to go with the Prime elevations.
Martin is correct. The manual is confusing but I verified with Klipsch.
Hi great videos awesome setup I'm looking at getting a pair of these what did you think of them I'm wanting to add Dolby atmos to my system and was thinking of adding these as my front height speakers would it be more effective to do that instead of putting them on top my front speakers
Could you tell us the advantage of At most?
Just curious What the sensitivity of these speakers are?
I got the sony atmos speakers going to upgrade from my yamaha tsr 700 av receiver to my now onkyo 610p going with klipsch elevation speakers
Thank you fou the video. One question. If a will use these speakers as elevation (heigh) Where do I need to put them? In front of me, rear or side?
Look at Dolby’s website for placement - www.dolby.com/about/support/guide/speaker-setup-guides/
Great video ! I am using four atlantic technology ic-6 oba in ceiling speakers, very happy with them, great dispersion.
Awesome!
Like your reviews quality is good and informative. I Have 4 RP 240sa in our theatre room first I placed them on top of my RP 280f front and RP 160 rears. I have 9 foot sealing and was not impressed with the results, I then moved them to the walls with a much better atmos experience. I have no replaced them with 4 klipsch in ceiling speakers the Atmos sound great. The klipsch in USA are not expensive there in Australia the RP280f are (RRP) over 3000a pair so they are great value in USA.
Thanks Roman. In-ceilings are always the best option, then elevation speakers, and then Atmos Modules.
love your videos keep them coming. I was hoping you could hang them up would have loved to see how they sound compared to the SVS elevation speakers. I am thinking about upgrading my current Klipsch reference 2018 series to the new RP line that you are reviewing, or going to the ultra bookshelves and center. I wish that you could also review their lower reference line to see the value in them.
Thanks Daryl. I might be able to try a pair as elevation speakers by removing my Klipsch RS62 II Surround Back. Not sure yet how that would work
I recently purchased a klipsch setup with reference towers that have 10 inch drivers center channel set of bookshelf speakers along with 2 10 inch subwoofers. I bought the sony str dn1080 which is power the speakers at 165 watts. My question is will my receiver damage or blow the 41sa atmos speakers or should I just buy the 500sa model? Thanks for your input
Once you connect all of your speakers, the Sony will likely be sending less than 100 watts per channel.
Can the feet on these be removed and replaced? I was wondering if they are just stuck on or with a screw
If I remember correctly I believe they’re just stuck on
Thanks for this very informative video Youthman. I am a newbie and pardon my question. On selecting between atmos and surround switch at the back. Does it mean that when I am using it to reflect the sound off my ceiling, I should select atmos but if I am going to place it on my wall for height, I should select surround? In the end, will it yeild the same effect on giving you the feel on the elevation of the sounds? Thanks and more power to you!
You are correct. The only time you need to select Atmos is if you are using them as up firing speakers. I recommend using them as height or surrounds instead of up firing I’d possible.
Thank you so much Youthman. More power to you. :)
Great video Youthman!!!
Thank you David.
Can you use the ATMOS setting when mounting them at the top of the wall above the TV? Or does ATMOS only work when used as a firing up configuration?
Klipsch advises only to use the Atmos setting when the speakers are being used as upfiring modules. When wall mounted as surrounds or height speakers, you should set them as “surround”
@@Youthman Thanks. I have the DENON 3700h and was wondering if I will lose the atmos feature by mounting them on the wall with surround setting on. Or it more to do with the receiver to simulate atmos than the speaker itself. This is all new to me so basically set them to surround as they will be on the wall and use the DENON configuration. I want the best atmos experience I can get without ceiling speakers. In your opinion would it better to have them fire up with atmos on or on wall as surround?
@@xcSTRIKERxc I've in the same boat. And I've been wondering about this. When I first got these, I put them atop my front tower speakers to up fire to the ceiling. But I do not have an ideal ceiling. It's level. But not completely flat. With support beams and segmented wood pieces. The ATMOS experience with them like that has been disappointing.
This weekend I had a buddy help me mount them up high on the wall by the ceiling. I ran my AVR's setup speaker program. Changed the Dolby SP (up firing on top of tower speakers) to being height presence. But left that switch to ATMOS. Then ran the auto calibration tool. They sounded noticeably a lot better than when they were on top of my speakers. We watched Capt Marvel and the sound stage was so much bigger. Then I thought about that switch, and changed it from ATMOS to SURR. Ran the calibration program again. And now that sounds even better! But I need to test out some more shows.
I'm currently using my Yamaha RX-681 to do this. I got a Denon 6700, but it's in the shop. When I get that back I'll be able to hook up my rear height presence using 2 more RP-500SAs.
You should try both. Though since your reply is 4 months old. I imagine you already did. From what I found on the internet forums, there are not that many people using ATMOS speakers. But the ones that do, say it's a better experience to have them on high on the wall than on top of the towers. Though, if you have an ideal ceiling (flat and featureless), and the angle lines up so were you sit aligns with the sound bounce then they might work. Though, to paraphrase something I read this weekend, "if you want to hear sound coming from a particular location, then put a speaker there."
:)
If mounted and set as front high speakers. May I know the key should set to atmos or surround?
I received clarification from Klipsch. The only time you set the switch to Atmos is if you have them up firing and counting the sound off of the ceiling. Surrounds or Height Elevation mounted should be set to Surround.
Switch speakers placement in the speaker box first so that the sound sounds correct, like in the SVS Prime Elevation speakers, that placement both look right and sound better. Bigger speaker elements need more space, not less, smaller speaker elements does not demand that much space, how hard can it get to understand that Klipsch? I like Klipsch, but not that element placement in that speaker box, or any other brand and model that looks the same when it comes to the placement!
So after seeing this I decided to change my systems around. These will work great in my small theater on top of my RF 82 ii. So I guess I will be changing out receivers and putting my Marantz SR7012 in that little room. That will give me a 7.2.2 in there. Yeppers I think that will be the way to go.
I almost went with a 140 model but found these for the same price as the 140 in an open box special. So they are ordered and on their way. They are walnut that doesnt match what I have but I figure I can always paint them black worse case.
Awesome. I just returned from a family vacation. Hoping to get them setup this weekend
@@Youthman They just came in today, the RP500 SA. I hope to set them up this weekend.
Got everything set up, took a while to get the Marntz dialed in with the room along with the front height speakers. Watch John Wick 2 but still needed some tweaking. Put on Skyscraper last night and wow! Got everything playing nicely and working well in my 12' wide by 10' deep 2 oerson theater! Very happy with the way its sounding now.
Awesome! Thx for sharing Scotty!
If I install the speakers as back height do I put the switch on atmos or surround For the atmos. idk if the atmos switch only if you put speakers on top of mains
POTE I use the Atmos setting. Trust me!!! I’ve done every setup and experimentation of these speakers. I’ve had them for 4 months now. I will tell you right now. Auto calibration will get these speakers wrong always. I currently have them upfiring as they sound better. However you have to manually set them if you truly want the best sound. I was underwhelmed when I got them out of the box and turned them on. They sounded good but it wasn’t what J expected. I tried angles. Moving them to different locations and nothing really made a difference. You have to manually change the the decibel level within your receivers audio mixer. They work EXACTLY as advertised. They completely come alive and it blew my mind. It’s not a gimmick. I repeat. It’s not a gimmick. However they sound really good too as height. Just keep it in Atmos mode. You should also manually configure them in height as well if your comfortable.
@@JavonDGreen ty what hz will be best for them set at heights
I kept them set at 150. However there are movies like blade runner where it gave a little too much bass because of how active they are. I’ve had them as low as 80 and 100 with no issues what so ever.
Great video as always!!! What crossover settings do you use youthman?
Mains and Center are at 80Hz, Atmos I believe are at 120Hz.
Thanks youthman! just got these speakers myself. Klipsch said min recommendation is 150. I wasn’t sure if that meant 150-200 or 40-150.
I’m not sure myself. Will have to research as I know up firing modules use different settings then my In-Ceiling do since the sound is reflected and bass frequencies don’t reflect too well.
@@caugustino09 From chart looks like they reach 120 Hz without meaningful loss. -3 DB
www.soundandvision.com/content/klipsch-reference-premiere-rp-140sa-atmos-elevation-module-review-test-bench
Larry Wong hi Larry I believe your referring to the 140-SA. These are RP-500SA
Can you use this as a wall surround speaker?
Yes they can definitely be used as height speakers or surround speakers one placed on the side walls. Simply select the Surround toggle on the back.
Youthman copy that. Thank you so much. Thats one problem ticked off.
Why does not anyone tell about the angle? It is important to know where to place it...
You would need to ask Klipsch
Or calculate it using the angle of incidence equals the angle of reflection (same principle as in pool)
i think if you went a sound coming from the ceiling you put the speaker there not some bouncing nonsense
I agree but the reality is not everyone has the luxury of cutting holes in their ceiling like I did. Some people rent, live in an apartment or have a wife that says no to it. Companies are just trying to offer an option for those that don’t want to do that. Only one way to find out for myself. 👍
or maybe set theme at the sides above the surround speakers pointing down in the listen area
I purchased my atoms modules 8 months ago, and right after I got the Klipsch released these. Thats a cruel joke they played on me.
Great ,I'm.usinh Dali Alteco Height speakers which has similar design and toggle switch to change the firing angle...
sounds more like a commercial than a review.
If this was a commercial, who do I contact for my check?
I have watched 3 of you're video's now and in every one of them you don't play the equipment just review it...Lol. It's almost like you are an actor with a script that doesn't want to play the equipment because that would be out of your acting world...Lol.
Hi David if you look through my videos, you will find that when I first receive a product, I typically do an Unboxing / Overview. After I’ve had some time with it, I will provide a final review. When I have time, I provide additional videos which include audio demos. Usually they will have “Audio Demo” in the titles. Thanks for watching
You really belive in this sh...t?? Only mounting speaker ,never bouncing down etc
People dont be fooled by these tricksters!! These are just normal bookshelf speakers, just get a high hz range from 20 to 20 000 hz bookshelf speakers for atmos ceiling setup!! Dont get scamed by these tricksters!!!! And the bouncing effects are you kidding me??? No bouncing here, just mount them on the ceiling.
Jani, most of us realize In-Ceiling is the best setup for Atmos. I have 4 In-Ceiling speakers for my Atmos setup. But the reality is people in Apartments, renting a home, an elderly person that can’t get in the attic or someone that simply doesn’t want to put in the time, in-ceiling really isn’t an option. That’s who these were made for. There are typically trade offs in exchange for convenience.
@@Youthman yes you are right
Jani Please research who Home Cinema Choice is. Their O/L presentations, their Magazine.
You might read this review. Speaker rated 5 out of 5.
www.homecinemachoice.com/content/kef-r50-dolby-atmos-speaker-review
This a Reality. Another true Atmos choice.
Is rated 5 good Atmos
www.bestbuy.com/site/reviews/klipsch-reference-premiere-5-1-4-300-watt-passive-2-way-height-surround-channel-speakers-pair-gloss-piano-black/6259995
Have a pair of these as front heights. Delivery of another pair as rear heights are coming today. Already ran the wires. Was a long run, so used 12 guage. Can't wait. 5.2.2 is immersive but 5.2.4 will really be a difference maker. My room is small, but I do want to have 7.2.4 eventually. For that, ill need an amp, as I have the x4700h.
2 pb 2000s.
2 rp6000f
1 RP404C
2 rp400m
4 rp500sa
Denon x4700h
77" LG CX
Panasonic UB820
PS5, Apple 4k TV
🤘🏻🤘🏻 I'll worry about external amplification later. These speakers are easy to drive. I've got an aircom T10 that cools the AVR well. I'm loving every minute of this. The svs subs really made the difference. Bouncy house atmos didn't work for me. I have a low popcorn ceiling and..the sound was eaten up by it. They would pretty much bounce off the ceiling and come back down 3-4 feet in front of my mains. Heights are much better. Wonder if I should amp assign them as tops for atmos though. Tops seem to get more data than heights do
I use 6 wharfedale Diamond 9.0’s mounted to my ceiling. 2 either side but directly above the main seating position, 2 around 4ft ahead of my rear surrounds. And 2 around 4ft ahead of my main left and right fronts. I run mine at 80hz as I do with all my speakers, and get superb in room response. My only gripe is, this battle between Auro technologies and Dolby labs. I had my configuration set to 6 heights, and atmos was GREAT! But to get my Auro 3D running, I had to recalibrate my AVR after changing the configuration to 2 front height, 2 top middle and 2 rear heights, and while auro3d sounded good, it made the atmos sound...well, just rubbish. So I went in favour of atmos, by yet again setting the speaker configuration back to 6height, and running calibration again. This configuration suits DTS-X and Dolby Atmos, but Auro technologies don’t allow for that configuration in their decoding. I chose 2 great sound formats over all 3 but 2 of sounding crap. Abit mean of auto tech if you ask me.
@ Youthman - I am split between my decision whether to go for Klipsch RP-402S or Klipsch RP-500SA for my rear surround. I have Dolby atmos set up with 4 ceiling speakers with 5.1.4 set up. Rear will be kind of on the side at back not completely back
If these are placed against the ceiling and top of wall pointing down, should the toggle be set to atmos or surround?
It was hard to find info on this. I had just moved them from being up firing on top of my towers, to now hanging on the wall by the ceiling. I was able to find a couple YT video replies where they said you want to toggle it to SURR when used as either a height presence, or surround speaker.
Youthman, loving the high quality videos!! Been getting into home theater over the past few months..I have the Denon AVR S740H. But am considering exchanging for the Denon AVR X4500H. I Have a full 5.1 Klipsch setup right now. My speakers are all from the 2018 Klipsch reference line. Do you think I will get much of a wow factor from upgrading receivers? Also am going to pick up these Atmos modules to use with my r-820f towers. Thanks for your hard work and dedication to the channel!! Looking forward to hearing from ya. ✌
Currently using the RP 140SA as Atmos speakers and they are quite nice. Looking forward to your RP500SA review 👍🏼
Question: If I mounted the RP-500SA on my front wall near the Ceiling as part of a 5.1.2 system, should the switch be set to Surround or Atmos?
I originally thougth "atmos" but people online write that atmos should only be used if they are placed on the front speakers pointing up.
In case you didn't get an answer by now. Always set it to Atmos. If there's no Atmos, the next best thing depending on the movie is dolby/ DD+ or DTS. Usually your receiver switches to the right encoding automatically but sometimes you'll have to press one of the preset buttons(Movies, music or games) to find the right option for you.
Got these 3 days ago for $350....im running 3 pairs of R-51m, RP-504c, 1 pair RP-500SA...in 2 weeks im getting the R-115SW...right now im using my Velodyne CT-150...for a 7.1.2 system oh and running a Pioneer Elite VSX-LX503...have to do a video of my in progress setup!
Congrats! My first sub was the Velodyne CT-100. 😀
@@YouthmanThanks, i cant believe its still going....but i never abused it....i was actually thinking of getting the svs sb3000 but for the price im gelling the R115 i cant pass it up....i will run both the subs to see if it sounds good....the ct150 is only rated down to 23hz....the r115 should cover the rest....we will see how it goes!
I love these videos! And love seeing how excited you get opening the boxes, we share the same feeling! I also love your setup. I was blessed to be able to buy an anthem avm 60 this past Christmas for myself, and I will be waiting for more videos like these as I will need atmos speakers soon! 😁 have a good one!!
Thanks! And congrats on that sweet Anthem! What are you using for power?
Youthman Until I find what I want, I am using active focal shape twins for the fronts and shape 40s for the rear surround. And an hsu sub, all borrowed from the computer room! I may take a look into that parasound amp you reviewed a few months back, or just stick with anthem and try the MCA325. Any chance you will be reviewing anthem power amps sometime soon?
Hi youthman,can I add more speakers to my front channel
SVS prime elevations ftw!
I’ve heard good things about them. Have you compared them to the RP-500SA?
These are 5 1/4” speakers compared to the 140s....so to me they are worth a good look vs prime elevation.
I just like to ask when they give an opinion on something, whether they have personally heard it, or if they are simply repeating what they read online somewhere. 😀
I’m guessing since the RP-500SA are so new, this might not be the case.
I personally do not know which is better as I have not heard either so I’ll wait to give my opinion once I’ve had the opportunity to hear them.
@@Youthman I was primarily looking at Klipsch or SVS as height speakers for my new Atmos setup. I have older main speakers and surrounds (mains are towers, same series center, and surrounds are bipole). They are all tone matched. The brand isn't really around anymore, so the only Atmos speakers I could find from their brand would be in ceiling (and it's not really possible to go that route in my living room). My living room has fairly high ceilings, so it seemed height speakers were the answer. I chose SVS because of specs: quoted frequency range goes at least as low as my center speaker, and the sensitivity rating is similar as my speakers (you've noted Klipsch tends to be on the high side). I also thought the design might be better for heights: having the tweeters in the smaller bottom portion seems better for direct projection pointing downward (it also has a port in back, which even though there's not much space in back, assume it extends bass and makes it sound a bit bigger then what it would appear to be). Now that I've got everything setup, they do seem pretty well matched. Overall, I really like my system: my room is small enough that one subwoofer is more than enough, my mains are full enough range themselves for stereo music, and 7.1.2 is very immersive (I may upgrade to 7.1.4). My back surrounds are above ear level, and my recliners sit in the center of the living room (having a separate couch at the end for when entertaining guests). The only main experience I have with Klipsch is visiting my Dad: who has a 5.1.2 bookshelf system (with Denon receiver). The tonality seems very well balanced. He has Atmos speakers on top of his bookcases being pointed towards the ceiling. Because of the layout, speaker placement isn't ideal: the Atmos speakers are too high to be reflecting sound all the way to the listener, who's on the other side of the room. His recliners are also almost below the rear surrounds, so the sound from the listening position isn't as immersive. Just an example of how speaker placement and source material can be more important than one brand vs another. IMO, since SVS and Klipsch have their followers, I'm sure they're both good and have their own strengths/weaknesses. I've listed why I thought SVS was better for my setup. But the Klipsch would be a no brainier if you have Klipsch speakers, or are looking for reflecting speakers.
I don’t understand HZ and crossover settings. I have all Klipsh speakers and woofer. But not sure what settings I need in my receiver. Can someone help?
This should walk you through a basic setup - th-cam.com/video/6Z0svzYSAEM/w-d-xo.html
Thank you Youthman! You Da Man!!!
Youthman I have been looking for a video with all my questions!! Mind blown how you answered all my questions. Not I have a better understanding. Thank you very much my dude! Keep up the great videos.
I hate the music it is a distraction!
No problem. I’ll gladly let you edit any future videos 😂
Hey youthman,
Do you think these will be good enough to perform well as surrounds and rear surrounds? I know they can be set to surround but without having heard them I am not sure if they would actually perform well as a surround speaker or if that is just a side feature that it doesn’t actually do so well at.
Thanks for all the work you do with your vids.
These work well as surrounds. I would use them as height channels or surrounds over using them as up-firing modules if you can go with In-ceiling or height speakers for Atmos
@@Youthman Thank you for the reply, really appreciate it. I have 4 of the svs Prime elevations mounted high on the side walls where the side wall joins the ceiling and am using them as the dedicated atmos channels but was looking for something to replace my surrounds and rear surrounds due to currently just using some bookshelf speakers hanging on a bracket, which doesn't look very nice and is susceptible to having people walk into the side surrounds due to how far they stick out, so these would fit well there, I just wasn't sure of the performance and was concerned that they may not be up to it thinking they are primarily an atmos speaker.
I "could" go in ceiling but getting the WAF on that would be a bit of a mission to cut massive holes in the ceiling, so thought the SVS elevations would be a good compromise as they got great reviews when getting comparisons done against in ceiling.
SVS elevations should work very well for Atmos. They have certainly received very good reviews.
Hi, I wonder if you can help. If these speakers are hang on the wall, should it be set as surround and a crossover of 80? I have it on atmos at 110 and I can’t hear any separation of sound? I appreciate your thoughts. Thanks!
did you ever find the answer to this? I am curious too
@@adityabirbal unfortunately not, I’ve just set the speaker to atmos and set the crossover to 80.
Hey fellas, according to Klipsch, the only time you will put the switch to Atmos is if you’re using them as up-firing speakers.
If you’re mailing them on your wall as surrounds or height speakers, you will put the switch to surround.
Your crossover is going to vary upon your room and integration with your subwoofer so there’s not an easy answer as to what is the best crossover for those speakers. Hope that helps.
@@Youthman That’s really helpful! Thanks! I’ll recalibrate my setup.
Question: if I have two height speakers already but are not dolby atoms.they are just small surround sound speakers that I have as my surround back. Will they still work it’s purpose of Dolby atmos or do I need to have these new ones to get the experience ?
My set up is: center channel, two towers in the front surround left and right, surround left and right, 2 height top rears.
I’m wanting to add the front height channels and I’m wondering if I need these or am I ok with just using small surround speakers.
Can’t do ceiling speakers as of right now due to current living situation. Thinking of using these on top of my towers (rp280fs) for now for some type of Atmos effects. Selling Sonos arc and right now that is the closest I’ve come to Atmos so I’m guessing these will at least be an improvement over the Arc. Then when I move I can do true ceiling Atmos speakers and reconfigure these as side or front heights? What does anyone think of this plan, I am new to all of this
I just bought a pair of the rp-500sa to pair with my 600 series bowers and Wilkins. I am also running the Marantz sr-8012 receiver. Right now I am bi-amping as a 5.2 channel setup. I am a novice and trying to figure out the best placement for the klipsch 500sa’s. Rear, front, atmos setting or surround setting, mounted on wall or set on top of speakers to up fire?? Any advice on this would be great. If I like them I will buy more and go to a 7.1.4 set up (unless I can add 2 subs) thanks in advance.
Hello Youthman.
I have one question for you:
When do we get new subwoofers for Klipsch RP series speakers?
I see only SPL 120 and 100 but I want the sub from the video:
th-cam.com/video/AQOVc2vPs2E/w-d-xo.html
I know this is a Older Video, But Out of Curiosity, Which Atmos Height Speaker's, Can Handle the Most Watts of Power The Klipsch RP 500 SA or the SVS Prime Elevation Speakers????
Hi YM, My receiver is a 7.2 channel - I currently set it up at 5.1 -- should I recalibrate again if i add Klipsch R41-SA (place on top of bookshelf front speakers)? Thank you!
Hello I need your help I purchased tsr700 Yamaha from Costco and klipsch system 625fa speaker where do I connect wires on receiver for Atmos systems
75W RMS speaker is not weak for A/V Receiver 200W per channel?
What are the best banana plugs for the RP500SA to connect with 800 series speakers?
Im an owner of an old system of the Onkyo Amplifier and their speakers of 5.2.2, but now im looking for an upgrade to a 7.2.2 and going to use these Klipsch Dolby Atmos speakers and change the rest of the speakers to Polk Audio and Klipsch surround 500s speakers.
Sweet getting 2 pairs in piano to replace my klipsch r14s.
Nice!
Happy new year to you and your family's. I just ordered the denon x4500h it was on sale I haven't received it as yet. I was also looking at the sr7012 for the same price I was wondering if I made the right choice first time into home theater. My speakers are rp-160m front R-25c center surround back R-15m ceiling
RIC-65 sub R-120sw I was also wondering if those receivers is over kill for those speakers. Thanks.
I got a Klipsch r-120sw for half off. It seems to be a very affordable and popular sub that performs very well. Is it possible to do a review on that?
I’m planning a new 7.1 surround build with all speakers mounted near or on the ceiling... Would you recommend getting three pairs of these with Klipsch’s RP-600c and R-115SW?
I talked to you couple weeks ago about upgrading my RF-7II to the RF-7III. I upgraded to the RF-7III and also from the RC-64II to the RC-64III. I am very pleased with the RF-7 III's and the upgrade was well worth it. I also have the RP-250S for my surrounds and I am pleased with them also. Now, here is when it gets even more serious. I have the dolby atmos RP-140SA on top of my RF-7 III. I do not have rear firing atmos. I have basically on my rear surrounds a old set of polk audio simple 1" tweeter and a 4.25 woofer. 50/100 watt. simply it has sufficed for 20 yrs. Now since I have got serious about the RF-7III's and the RC-64III and the RP-250S.. I am wondering about upgrading the front RF-7III by adding the RP-500SA on top of the two front main speakers.(to replace the 140SA's?) But would it be venturesome to add 2 RP-500SA's to the rear presence or atmos. MY yahama RX-A3050 is a 9.1 channel. The front and rear presence works as presence speakers when atmos is not being decoded but when atmos is being decoded then the presence speakers become atmos decoded. Is it worth adding the RP-500SA as rear firing atmos in addition to the front 500SA's Or should I just keep my front RP-500SA atmos on the RF-7III's and use the second pair of RP-500SA's as my rear surround to replace the old polk audio rear surround speakers?? ?? Hope I have not confused. simply should I also put 500SA's as rear atmos in addition to the front atmos? Or can I get by with the front 500SA's and just use the 500SA's as rear surrounds?? Or should I use front and rear firing atmos??? Sorry. If you read this several times you'll probably figure it out. You can text me with response to 502-600-1120... I need your opinion.. Thanks very much!
These are $575 in 2021 :(
these are on sale on amazon right now.. just picked them up for $350
Hey can you do a review on the svs Atmos speaker when use as an up firing? And do a comparison with Klipsch to see which one does a better job as a height when firing up
Can I use this as main speakers for an Oled Tv ?
Yes they could be used as main speakers.
Can i connect this to my lg dolby atmos soundbar?
wait, you use 6000s as surrounds....
Those things up beautiful!
Thanks.
Would be interesting if there is a difference in sound between the in ceiling speakers compared to RP-500SA on the ceiling (not bouncing off ceiling). Great video though!
Any conclusion as I was thinking as option because in Celine is not possible, what not sure if is worth it?
What type of Speaker wire do you recommend for the RP-500SA ???
This is what I have used for years - Monoprice Access Series 14 Gauge AWG CL2 Rated 2 Conductor Speaker Wire/Cable - 50ft Fire Safety in Wall Rated, Jacketed in White PVC Material 99.9% Oxygen-Free Pure Bare Copper www.amazon.com/dp/B001WHT8LC/ref=cm_sw_r_cp_api_fabc_89dVFb1MP1Y20?psc=1
@@Youthman Thank you! Speedy service!
I would like to ask a question, what is the width from rubber foot to rubber foot (the down part and the upper part also)? The overall width is 6.81 inches but i would like to ask how much is from rubber to rubber.
Thank you,
I reviewed these many months ago and unfortunately no longer have them in for review
I cant wait to get mine, i ordered 2 pairs from World Wide Stereo. Got my RP-280F'S and RP-250S from them too. My RP-450C i got from Magnolia Home Theater inside a bestbuy store by special order. just need to upgrade my Receiver again lol! The only thing i wont upgrade is my Oppo UDP-205.
Very cool! I love getting new gear. Enjoy your new setup Jose!
Nice overview. Pics were very detailed. Awesome you have been able to get a hold of some of these brands for demos/sponsors!
Thanks. Glad the photos are helpful. I find I can get much more detail from taking photos than I can with recording video
Agreed. Especially with a nice camera like you are using. I was going to try and do the same with some upcoming videos. A lot I do is more building/making things and it's easy to just set the camera and let it record. Keep forgetting to take pictures along the way!
I wonder how those would look on cherry wood RF7s?
Hi! I find your videos great and very helpful. If you add 2 more RP-500SA on the top of the rear speakers would it mess up the sound from the front speakers RP-6080FA? Does your configuration improve the Dolby Atmos? Thank you.
Yes you can add RP-500SA on top of rear surrounds for Atmos.
This is my setup th-cam.com/video/9rQxNd1Lf38/w-d-xo.html
Awesome work as usual man! Great looking speakers. Great unboxing and overview video. Always look forward to a new Youthman video!
Certainly appreciate it
At what angle do they fire upwards?
7:00 - atmos... height surround... but what about height atmos? :D
If I'd like to put them on wall, below the ceiling, so they will work as height channels - should I choose atmos or surround?
I ask because I think surround is for the use of it as normal surround speakers, just placed on the wall, for 5.1 or 7.1 systems.
I checked with Klipsch and they advised the only time you should use the Atmos switch is if you’re using them as a firing Atmos speakers
@@Youthman Thank you! :)
Question.. Would be as equally good as the in celling? Or just something that tries to do the same. Ty :)
I'm not an expert on the subject, but from what I gathered, it will never be as good as in celling, but even tho it's far from being as good, it seems like people are still considering that it's worth the upgrade if you reall can't put in celling speakers.
Hey Youthman,
I have in-ceiling front Atmos speakers but can't install rear Atmos as in-ceiling. Which would you recommend as rear atmos elevation, these or the Klipsch RB-52ii bookshelf speakers bracket mounted and angled down?
Look fwd to your response and great vids mate!
That’s a great question. Unfortunately I have never owned the RB 52 but do on the RB 62 II they are fantastic speakers. Any speaker can work as a Dolby Atmos speaker so the RB 52 would work just fine. The RP-500SA would be much simpler to install and is already angled downward so for the convenience, that would definitely be The simplest to implement. I think both would work great for rear Atmos. I would lean more towards the 500 essay since it literally was designed specifically to be used as an Atmos or height speaker. Good luck with your decision
@@Youthman Thanks for the swift reply, really appreciate it and your advice also. I'll probably go for the rb-52ii's as they are half the price where I am and could be used as stand alone bookshelf speakers down the track if need be. 👍👍👍
Hi any idea how to mount them to the ceiling?
Thanks for a video.
They aren't designed to mount to the ceiling. They have a screw mount in back that allows you to hang it on the wall. I have seen some posts where people took a speaker like this, and even bookcase speaker, and built a special contraption to attach it to the ceiling and aim it down. But I don't know how to do that. They weigh 8lbs. And could be a falling hazard if not done properly.
As someone who doesn't have any speakers could these be used just as a left and right? looking for something to go next to the tv and for records
I would recommend bookshelf speakers over these for mains.
@@Youthman Thanks for the reply, Ok i'll look into them, its a shame as I like the look of these more
Hey guys!
How is the performance of this speakers used as main surrounds?
They work great as surrounds. I used them that way for the final review of the system.
Can I sit these in top of a set of RP-160M?
Dimensions for the RP-160M are Dimensions: 16.67” x 8.81” x 12.86”.
Dimension for the RP-500SA are Dimensions: 7.39” x 6.81” x 11.16”
I think the first number is height for both. So it looks like the Rp-500SA would are 11.16" deep, while the RP-160M is 12.86 deep. It looks like they could fit on top with a fraction of an inch to an inch. Sincethe 500 has a tad bit smaller foot print than the 160. But I'd double check the specs online.
erskine spell from oxford,al | i have the klipsch rp-500sa and they sound great in my den with cathedral ceiling, even tho you are telling people that they dont sound good .
Are you referring to me or someone else’s comment?
Upfiring Atmos will perform best with flat ceilings as angles ceilings will cause the reflected sound to not be redirected to the listening position. A simple law of physics determines that...Angle of incidence equals the angle of reflection (similar to playing pool).
@@Youthman i see videos on TH-cam and most of them say that those speakers don't work good with cathedral ceilings
They are correct. Upfiring do not work well with cathedral ceilings.
Just added these to my icon set they sound great
I have the sony ones are cool. Not sure about room for these should of been smaller size like sony ones would be no issue
Youthman!!! Just connected my new Klipsch Rp-500sa with it on my tall height speaker stand. My other stand still has the Rp-140sa upFiring. Wow. Just shooting out the AVR Level calibration range of noise sounds to each upFiring Klipsch showed much Dynamic sound differences between the two. Klipsch Rp-500sa produced much stronger volume ceiling bounce to MLP. The 500sa had more Vibrance, Dynamic Range, Clearity and of cource loudness. Granted this is just DB Level calibration noise. The Rp-500sa are so damn beautiful. Stunningly so. Its Larger than the Rp-140sa. Can't wait to get the other channel 500sa installed on my other tall height speaker stands. Then audition several my best Atmos Reference discs.
Awesome Larry. Be sure to let us know after you get them setup and have spent some time with them
@@Youthman Still Assessing as upFiring, bottom switch set to Atmos__ not set to Surround. Obvious What really impress is high frequency sounds are really efficient. Bouncing off ceiling. Can Traverse even beyond MLP. ie., coins rattling, electrode sparking bolts, giant insect noises, missle and bullets jetting panning across Left to Right __Front to Back of Top Atmos bubble. All aforementioned can hear even if sound volume is low. Wow factor... Lower Frequencies can hit hard on the ceiling. Lots dynamic range. Im talking lower frequency atmos objects. Tho overhead ambient sounds top of the bubble also impresses.
Youthman____ "Higher frequencies even at low volume will bounce splenditly to the ears. Very much improved over 140sa. Lower frequencies hits ceiling quite hard. Compared to my RP-140SA's I had to lower my AVR DB settings for them. And still heard many many sounds I not heard before. 500SA are Amazing. Recommend auditioning them. Compare them to anything you have. Playing the very impressive GooseBumps Atmos blue ray disc... when the Invisible Boy jumped on the front hood of moving car then walk hop jump to top ceiling of car... I heard the Top Loud Thumps crawl 5 feet along my ceiling top or atmos bubble towards the MLP thats me. I was floored. My 140SA did not crawl thumps like that."
So how do these sound as Atmos enabled speakers? Soon I will buy four of these speakers to place them on top of my four RP280F’s
I don’t know as I just unboxed them 😀
Youthman nice, I’m curious how they will sound compared to your current in ceiling setup. Is it possible to test them with music and video sources? Also there is talk on AVS about adding a couple of dB’s extra after Audyssey has set the levels. Please test these situations if you have the time for it!👍🏼
Thx for the suggestions. This is a new experience for me. I believe I’ll need to set them around 150Hz too since I will be bouncing the sound off my ceiling.
Youthman yes you need to set them up with at least a 150hz crossover. 200hz can give a more immersive experience depending on the room and blend with the other speakers.
I would love to hear how these sound with music and movies in “Dolby Surround” mode. I refer to content which have no native Atmos tracks.
Have Klipsch RP-140SA Dolby Atmos Speaker (Pair) really like them....
Awesome. How do you have them installed?
@@Youthman On top of my Klipsch RP-250F Reference Premiere