10КΩ довольно много, для закрытия затвора мосфета на большой частоте, а даташите предполагается использование вплоть до 2КΩ, как минимум один управляющий выход шим контроллера выдерживает ток до 0,1А
pin 4 ,5 col 1 , col 2 should get connected to Gnd to get on e1 and e2 - puls to the transformer , sense should be negative to pun 1 with Vr 10k to adjust the output voltage on trasnformwe
Proteus 8 software does not initially have SG3524 IC in its library. I had to download it from another website. Proteus software does not support it in its simulation. So I think you would be better off using SG3525A IC instead which is supported by proteus 8 software in its simulation. These two ICs are very similar.
@ElectronicPrinciples thanks.. but I'm having problems with some sg3525 ic I downloaded for proteus. Can u help me with this u used in the video. Either with a link to download this exact type
Please use Proteus software that already has these ics in its library. The Proteus 8 software that I used had SG3525A ic in its library. So I did not face any problems in simulation.
Vaiya, circuit ta practical kore dekhale khuboi upokrito hotam❤
10КΩ довольно много, для закрытия затвора мосфета на большой частоте, а даташите предполагается использование вплоть до 2КΩ, как минимум один управляющий выход шим контроллера выдерживает ток до 0,1А
pin 4 ,5 col 1 , col 2 should get connected to Gnd to get on e1 and e2 - puls to the transformer , sense should be negative to pun 1 with Vr 10k to adjust the output voltage on trasnformwe
Debe traducir español. Gracias
Traduce automáticamente videos de You Tube a tu propio idioma. Por favor mira este vídeo:
th-cam.com/video/LZz03myFuWA/w-d-xo.html
pin 16 is connected to 12v and you said :pin16 is reference voltage with value of 5 volt on the minute 2:57 in this video
Please how can i get the IC for simulation on proteus. Can you help me with it ?
Proteus 8 software does not initially have SG3524 IC in its library. I had to download it from another website. Proteus software does not support it in its simulation. So I think you would be better off using SG3525A IC instead which is supported by proteus 8 software in its simulation. These two ICs are very similar.
@ElectronicPrinciples thanks.. but I'm having problems with some sg3525 ic I downloaded for proteus. Can u help me with this u used in the video. Either with a link to download this exact type
Please use Proteus software that already has these ics in its library. The Proteus 8 software that I used had SG3525A ic in its library. So I did not face any problems in simulation.
How can i get this please ?
I am sure you can buy this IC from the internet. It is a very popular IC.
Can it power refrigerator
I do not suggest using an inverter to power a refrigerator since a refrigerator stays cool for many hours even after the power has gone.
Please English OR urdu subtitles
I have added English subtitles to this video as per your request.
@@ElectronicPrinciples Very Good,Thank you!!