I installed this kit on my Sur-Ron X Black with their BAC4000 and heatsink. There are a few bike harness configurations that work but you may need to modify your harness slightly. I had to modify my harness but didn’t need a firmware update. GLE support is fantastic and very responsive. They got me going after a few emails. This thing is amazing. Smooth. No glitches. Customizable torque ramp is essential after using it… I was hesitant to spend the bucks on the heatsink kit. But it is engineered well and makes installing the BAC4000 way better than factory and easier to install as well. The stock Sur-Ron controller setup was glitchy and felt a little rough. You deal with it without too many issues. But after installing this kit, my bike is so smooth and tight. The increase in performance and speed, ability to set a street mode and the ease of tuning is why I bought it. But the new feel and quality of the ride is definitely worth it alone!
Installed this kit on my Sur-Ron X Black with the GLE BAC4000 and it doesn't work with the Egg Rider at all and I can only get it to work sometimes with the GLE Dashboard. Trying to get Customer Support to work with me to resolve, but so far they won't assist until I get everything setup so they can remote in on my GLE Dashboard. Having to purchase an Android device that supports the Apps required before I can get any assistance. The GLE Dashboard looks really good with a lot of tunable parameters based on how and where you are riding. The level of tuning is great. I've tuned some parameters but still not any better. I hope to be able to use the GLE Dashboard one day with a working GLE BAC 4000. This video was very informative and helpful, as are most of the GLE videos I've watched, now if I can just get some customer support to resolve my issue.
I have not used the GLE dashboard in a while, lately I’ve been using the egg rider. Suddenly now that I want to use the dashboard I’m getting no throttle response, but with the egg rider everything works fine. What could this be?
I just tried motor tune ( analyze hall wiring ,offset and rated motor speed) and it jolted and jerked the rear wheel. From the sounds of the motor ( grinding ) and eventually stopped and did not read or tune at all I had thought for sure I ruined the motor. Surron still drives seemingly fine but I can not get through the motor tuning.. I also messaged the gle support because I purchased my bac4000 and bypass from gle. Please help Thank you
Gle messaged me back and told me NEVER TUNE THE MOTOR. That I did not listen and tuned my motor, and now my bike doesn't work. ( bike works fine, just would not tune) I learned from THIS GLE video, so i do not understand how this became my fault 😂
Can I install this display on a bac4000 that is running a egg rider v2? I would like a bigger display and be able to monitor temps. I ride off road only. I like the display.
Hello, I just installed a BAC8000 on my talaria sting and was wondering if there is any way to see the odometer for maintenance service intervals. The original gauge had an ODO reader but I can’t find total miles on the GLE dashboard
you mentioned watching the rpm gauge on sustained speeds, what would i be looking for?, also you have a settings history, looked like your in faults menu, i only have save there?
@@GLE ok, just took it out, started raining on me, i got up to 50 mph/ 7k rpm, no red, im sure it was close tho, TY, is the info by the speedo milage traveled?
my 8000 came with invalid settings in it. clicking hall test just ended in a lot of motor screaming. After copying all the settings I could see in this video it now works. Just incase anyone else runs into this
Follow up: when you install your GLE BAC, do not run the hall test. It’s already programmed and running the test will jack it up. They had to remote into the system and fix it. They sent me an email a few days later that gave detailed instructions on what to do … that e-mail could have saved me a little headache if it arrived before the parts. Nonetheless, I LOVE the GLE setup. I have 3 different saved files to use …
@@roostnureye that’s the smart thing to do (save the original profile before making ANY adjustments). That way, if it goes on the blink after tinkering, you can always reload the original map. I have 3 profiles saved depending on what I’m doing.
i purchased the gle harness and dashboard integration kit, Ive got the app also, im just about to install the harness and everything but i wanted to double check and make sure that it will all work flawlessly with an ASI BAC 8000 , I also have a NXT display running. The installation videos dont show a 72v setup or have any info if an asi bac 8000 will work for it?
I purchased the gle harness so I don’t need the bacdoor access?. Which give me a really bad headache. Is it a way to bypass bacdoor? I bought bac4000 to ert. And it’s completely useless without the bacdoor access. Is this the solution to my problem?
@@nomzig you simply need the GLE integration kit sold on our website which also comes with remote support. Once you have our integration kit you will be able to have access to all your settings and make adjustments or simply install our pre-made popular tunes
@@GLE Yep i know 😊, i gonna order very soon. I already contacted you guys for also fixing that rollback issue that i have with firmware version 5.0.19.
I helped my brother install the BAC 8000 on his Segway x260 but I cant get the app to register. Is there something I'm missing? I added the +1 to my phone number but it says to contact customer support. I emailed but no response yet. Any help would be appreciated.
@@JosephRuggiero-nu9vuyou need to email support and tell them your number and the problem. It happened to me too, that’s what I did and they answered same day.
I have a problem with searching for "e-bike" in the application. I find "e-bike" via bluetooth, but it does not search in the application. The problem occurs on two different phones. Any ideas?
I've watched this video twice already but am going back to figure out how to tune the speedometer, still haven't fount that part. It's be great if you added chapters to this video so people don't have to watch all 40 minutes, just to get the two minutes of information they need.
Also, where's the telemetry feature? Haven't used my bike in two weeks but just went for a ride and wanted to graph the amps/voltage/etc. I went all thru the menu, 5 times and could never find the telemetry page. Ugggh, I guess I have to watch a 40 minute video, AGAIN, just so I can relocate these features. Do you see why a better organized video (with better audio too) would be helpful?
Your comment is false and a lie, I ordered mine on Monday and it came in the mail Thurs. They have also answered 3 of my emails in under 10 min each time on different days at different times.
I installed this kit on my Sur-Ron X Black with their BAC4000 and heatsink. There are a few bike harness configurations that work but you may need to modify your harness slightly. I had to modify my harness but didn’t need a firmware update. GLE support is fantastic and very responsive. They got me going after a few emails. This thing is amazing. Smooth. No glitches. Customizable torque ramp is essential after using it… I was hesitant to spend the bucks on the heatsink kit. But it is engineered well and makes installing the BAC4000 way better than factory and easier to install as well. The stock Sur-Ron controller setup was glitchy and felt a little rough. You deal with it without too many issues. But after installing this kit, my bike is so smooth and tight. The increase in performance and speed, ability to set a street mode and the ease of tuning is why I bought it. But the new feel and quality of the ride is definitely worth it alone!
Time Stamps
0:22 BT Connection Setup
0:54 Home Screen overview
2:08 Motor temp settings
2:56 Saving individual tunes/settings
5:44 Power modes
7:00 Regen brake tune
15:13 Calibrate Speedometer
17:13 Faults
18:43 Throttle Tune
19:42 Regen Cont.
23:20 Motor settings
25:08 Speed limits
30:02 Motor tune
31:05 Battery Settings
34:33 Torque settings
35:51 Telemetry
38:31 Recap
Installed this kit on my Sur-Ron X Black with the GLE BAC4000 and it doesn't work with the Egg Rider at all and I can only get it to work sometimes with the GLE Dashboard. Trying to get Customer Support to work with me to resolve, but so far they won't assist until I get everything setup so they can remote in on my GLE Dashboard. Having to purchase an Android device that supports the Apps required before I can get any assistance. The GLE Dashboard looks really good with a lot of tunable parameters based on how and where you are riding. The level of tuning is great. I've tuned some parameters but still not any better. I hope to be able to use the GLE Dashboard one day with a working GLE BAC 4000. This video was very informative and helpful, as are most of the GLE videos I've watched, now if I can just get some customer support to resolve my issue.
Hello, they respond within 24 hours except of Christmas. Contact them at support@glengineering.co not .com
GLE has answered 3 of my emails all within 10 min of me sending each one, and the emails were all on different days at different times.
I just got this running on my bac8k, this is really cool! Thanks GLE
Awesome !
I have not used the GLE dashboard in a while, lately I’ve been using the egg rider. Suddenly now that I want to use the dashboard I’m getting no throttle response, but with the egg rider everything works fine. What could this be?
I just tried motor tune ( analyze hall wiring ,offset and rated motor speed) and it jolted and jerked the rear wheel.
From the sounds of the motor ( grinding ) and eventually stopped and did not read or tune at all
I had thought for sure I ruined the motor.
Surron still drives seemingly fine but I can not get through the motor tuning..
I also messaged the gle support because I purchased my bac4000 and bypass from gle.
Please help
Thank you
Gle messaged me back and told me NEVER TUNE THE MOTOR.
That I did not listen and tuned my motor, and now my bike doesn't work.
( bike works fine, just would not tune)
I learned from THIS GLE video, so i do not understand how this became my fault 😂
Sweet! Got the email mines shipping! Want a full display tho so I Don’t have to use my phone
How long did it take for you to receive yours after you ordered it?
@@EnableSUBSCRIBE it took me 35 days they ship after 30
My goodness you guy was sleeping all this time. This is what we need am lost for words nice jobs am going to get one now
Can I install this display on a bac4000 that is running a egg rider v2? I would like a bigger display and be able to monitor temps. I ride off road only. I like the display.
yes you can use the GLE app based display
Ordered my self one, can't wait to get it.
When I try to log into the app with my number it says to contact customer support? What do I do?
Do I have access to everything if I buy a used bike with the GLE Bac4000 already installed?
Hello, I just installed a BAC8000 on my talaria sting and was wondering if there is any way to see the odometer for maintenance service intervals. The original gauge had an ODO reader but I can’t find total miles on the GLE dashboard
you mentioned watching the rpm gauge on sustained speeds, what would i be looking for?, also you have a settings history, looked like your in faults menu, i only have save there?
Your looking not to redline too long
@@GLE what is the redline RPM, im assuming 10000, but?
@@craigsmith9764 the RPM will turn red at over 7000 rpm
@@GLE ok, just took it out, started raining on me, i got up to 50 mph/ 7k rpm, no red, im sure it was close tho, TY, is the info by the speedo milage traveled?
Seems very easy compared to others.
Super easy
Awesome feedback 👍🏽
my 8000 came with invalid settings in it. clicking hall test just ended in a lot of motor screaming. After copying all the settings I could see in this video it now works. Just incase anyone else runs into this
Hall test messed mine up … waiting on their response.
Hall test broke my bac8k also. New one arrived today, now I'm scared to run the app
Follow up: when you install your GLE BAC, do not run the hall test. It’s already programmed and running the test will jack it up. They had to remote into the system and fix it. They sent me an email a few days later that gave detailed instructions on what to do … that e-mail could have saved me a little headache if it arrived before the parts. Nonetheless, I LOVE the GLE setup. I have 3 different saved files to use …
I just got mine setup, I did not do the hall test and it sends to be running just fine! I saved the profile just in case I need to revert back to it
@@roostnureye that’s the smart thing to do (save the original profile before making ANY adjustments). That way, if it goes on the blink after tinkering, you can always reload the original map. I have 3 profiles saved depending on what I’m doing.
i purchased the gle harness and dashboard integration kit, Ive got the app also, im just about to install the harness and everything but i wanted to double check and make sure that it will all work flawlessly with an ASI BAC 8000 , I also have a NXT display running. The installation videos dont show a 72v setup or have any info if an asi bac 8000 will work for it?
Hello, contact support at support@glengineering.co
Can GLE work with Sabvoton controllers?
Not at the moment.
I purchased the gle harness so I don’t need the bacdoor access?. Which give me a really bad headache. Is it a way to bypass bacdoor? I bought bac4000 to ert. And it’s completely useless without the bacdoor access. Is this the solution to my problem?
Yes, this is a solution.
@@GLE sir someone told me, that it won’t work without he ASI access? Is that true? They are charging me 150 dollars/ hour to tune the bac controller
@@nomzig you simply need the GLE integration kit sold on our website which also comes with remote support. Once you have our integration kit you will be able to have access to all your settings and make adjustments or simply install our pre-made popular tunes
@@GLE ok tnx so much… so i don’t need this BS bacdoor access… just this harness is enough.
@@GLE one more question sir. Is this plug and play with those premade tunes?
i want to change my tune to gle only for that app alone. 😀 You dont get that anywhere else.
You can. Go to our website and pre order the GLE Integration kit
@@GLE Yep i know 😊, i gonna order very soon. I already contacted you guys for also fixing that rollback issue that i have with firmware version 5.0.19.
What's the lowest setting I could go on watts? can i go to 750watts?
Well technically yes but you would be going really slow or barely moving.
at 3 minutes into the video is settings history, i dont see that in mine, am i missing something?
I helped my brother install the BAC 8000 on his Segway x260 but I cant get the app to register. Is there something I'm missing? I added the +1 to my phone number but it says to contact customer support. I emailed but no response yet. Any help would be appreciated.
What is the email ? Contact support@glengineering.co
Did you get it figured out? I have the same issue
@@RP-xb3vh Yes, he called customer service and they reset his account.
Anyone install a 42 tooth sprocket? If so what did you set your gear ratio at?
I can't get to open the gle dashboard app, pls help. It keeps saying that im not authorized.
Same did you figure it out
@@JosephRuggiero-nu9vuyou need to email support and tell them your number and the problem. It happened to me too, that’s what I did and they answered same day.
where is the setup for matching mph to real mph
Gear ratio
I have a problem with searching for "e-bike" in the application. I find "e-bike" via bluetooth, but it does not search in the application. The problem occurs on two different phones. Any ideas?
Turn on gps and location services on your phone
@@GLE That's right, GPS must be on. Thank you 👍
Can't get the app to connect to the controller, my Bluetooth is on on my phone still not connecting
Contract customer support
I've watched this video twice already but am going back to figure out how to tune the speedometer, still haven't fount that part. It's be great if you added chapters to this video so people don't have to watch all 40 minutes, just to get the two minutes of information they need.
Or, break this video up into small videos that only cover the specific information people are looking for.
Also, where's the telemetry feature? Haven't used my bike in two weeks but just went for a ride and wanted to graph the amps/voltage/etc. I went all thru the menu, 5 times and could never find the telemetry page. Ugggh, I guess I have to watch a 40 minute video, AGAIN, just so I can relocate these features. Do you see why a better organized video (with better audio too) would be helpful?
Its at 15:08 and 35:50
Is it only for iOS?
Works with android and IOS
Nice are you Shipping to Germany ?
@@flatratezzk8866 yes we are
@@GLE were do you get app for andriod??
I'm not receiving the activation code.
Contact Customer support
Worse customer service in the business get an embx controller its a lot better.
Don't bye it from green line hmb is better green line take your money and dint give a bac4000 or refund gone bankruptcy
Your comment is false and a lie, I ordered mine on Monday and it came in the mail Thurs.
They have also answered 3 of my emails in under 10 min each time on different days at different times.
Brilliant