I have interesting wood pieces from my furniture making days. That's why I love the "How to" videos. It helps me see beyond my experiences and use them on dioramas of my own. Great community.
Hermoso video y muy completo,tengo un grave problema he hecho una mesa con resina y me aconsejaron dar una mano de barniz de dos componentes como final,y la lie ,he provado a limpiar con decapante,disolvente universal y acetona,y se continua pegando al tacto,podria darle con la misma resina una segunda capa de 2 milimetros??gracias anticipadas
Nice video !! I'm trying out my first resin project, with an old piece of wood willed with cracks, tents and character, however it's been outside so it's quite dusty in the fine cracks and dents, I have sanded it down to remove all the damage from rain on the top layer, and tried to clean with a small brush, do you please have any suggestions to cleaning the small cracks and dents that has some old dust on it ? Wound appreciate your feedback, thanks 😊
What type of surface is that that you're working on? I'm getting ready to do my 1st pour but I want to make sure I don't trash it when the time comes to separate it all.
I'm wanting to make a epoxy bathtub apron using wood and epoxy .. I'm debating using planks or thin wood disk .. I've never worked with resin before but I absolutely love the look.. can you explain your mold . What did you use to make the mold and it looks so easily removed ..
Wicked table but the dark blue in the center didn’t do it for me to be honest but still a lovely table I think he went that one step to far with that blue in the middle .👍👌
Saludos , un amigo mando hacer un trabajo con resina exposica , con madera real dentro ,,,,, pero despues de un par de dias el tope , empeso a curbar y se a deformado,,, ya que no le diero suficiente cuerpo de resina abajo de la madera ,,,, ,,, que se puede hacer en esete caso
It's amaizing work👍👍👍👍👍👍👍
Awesome thanks for sharing👌👌👍
Bahut Khubsurat hai
Thank you!
Looks great; I will try it.
Greetings from Germany!
Execelente trabajo felicitaciones
Esse homem é um bruxo
I love watching these videos. Super!
I have interesting wood pieces from my furniture making days. That's why I love the "How to" videos. It helps me see beyond my experiences and use them on dioramas of my own. Great community.
Hello bro very nice you work design
Wow. Excelent 👍
Que lindo queda... Pero como se prepara la resina para hecharla en la medera.
awesome..i really love the combination hardwood and epoxy
Hermoso video y muy completo,tengo un grave problema he hecho una mesa con resina y me aconsejaron dar una mano de barniz de dos componentes como final,y la lie ,he provado a limpiar con decapante,disolvente universal y acetona,y se continua pegando al tacto,podria darle con la misma resina una segunda capa de 2 milimetros??gracias anticipadas
Veramente stupendo!!!Complimenti all'artista che lo ha realizzato👏👏👏👏👏👏😀
That is awesome! Thank you for sharing.
Nice work. That’s a lovely piece.
Awesome work guys...
Beautiful artwork 👌👍
Nice video !! I'm trying out my first resin project, with an old piece of wood willed with cracks, tents and character, however it's been outside so it's quite dusty in the fine cracks and dents, I have sanded it down to remove all the damage from rain on the top layer, and tried to clean with a small brush, do you please have any suggestions to cleaning the small cracks and dents that has some old dust on it ? Wound appreciate your feedback, thanks 😊
Jestem oczarowana 😍😍😍, piękny, oryginalny 💞💞💞💞
Надо было подождать когда слой высохнет и тема с водопадом была отличная
Hi can u make a complete video abt the mould u did plz
Wow....great...👏👏👏👏👍🏼👍🏼👍🏼👍🏼
Thank you so much 😀
Nice one, what was used around the project as a mold, please?
Nice👍🤘
Gorgeous!!!
I liked
What do you put on the wood before adding resine epoxy. Thanks to answer.
How to make that mould? And what did you put in the centre before putting the log and resin?
Nice job!
Excellent
The colors are amazing
만들어보고싶네..ㅎ파랑은 무엇인가요?
Good job👍👍
Thank you so much 😀
Beautiful
Thank you 💖
Seu trabalho ficou maravilhoso!!! Parabens!!
Nice epoxy table!
Thank you for the valuable comment
Soo nice
Thank you
That was an amazing piece of wood for that project! Very nice.
What type of surface is that that you're working on? I'm getting ready to do my 1st pour but I want to make sure I don't trash it when the time comes to separate it all.
I'm wanting to make a epoxy bathtub apron using wood and epoxy .. I'm debating using planks or thin wood disk .. I've never worked with resin before but I absolutely love the look.. can you explain your mold . What did you use to make the mold and it looks so easily removed ..
We are making the moulds with metal tube covered with tape
Muy buenooo saludos desde Argentina!!
Tiene unos trabajos espectaculares... lo felicito
How did you make your circular mold? what material/how did you fasten to the base? Thanks! @
CADVICA ENGINEERING
I’m wondering the same thing about the marerial you are using to do your mold…. Love your table 😍🤩😍🤩😍🤩
Genio!!! Me encantó!!
You must mention which ratio mixing and which paint 🎨 using and all everything.its helpful your watchers
It's not paint.epoxy resin with hardner
Muy ermoso trabajo y buena música de fondo
What base u used as farm and making round also
what material do you use as mould?
What did you usexas your mold?
WOW this good and nice work what type of is chemicals?
Epoxy Resin
Super
So nice
muy lindos .felicitaciones
Super😍😍👌
Thank you so much 😀
belo Trabalho, parabens..
Thank you so much for your valuable comment
How did you do the frame I'm trying it nor working
What did you make the mold out of to go around it?
Can I asked, what did you use to make the mold? What’s it made of and how did you keep from sticking. You made this looking so easy.
same question...if anyone know about it plz plz bta do
Teflon.Spray and Cook.
@@mehraabzain903 Just use Oil
Hermoso, lo felicito
I don't understand Ur
Language
Goood job❤️❤️❤️❤️
Thank you so much 🥰
Que marca de resina utiliza, y que material utiliza para hacer el molde compartir las marcas plis ..
Yes! I like this video.
great
how are hou make mold for this table.
Beautiful design, what kind of tape do you use to make that barrier. Thanks
?
not tape, metal sheet
Normal .2 mm coil sheet
Que buen trabajo
what pigments are you using? have only seen powders and alcohol based ink so far, this looked like acrylic paint.
We used Epoke's Ocean pigments and Haksons metallic pigments
What chemical do you use? Please tell me.
Beautiful 😍
Wicked table but the dark blue in the center didn’t do it for me to be honest but still a lovely table I think he went that one step to far with that blue in the middle .👍👌
th-cam.com/video/z5kVzZkcuxQ/w-d-xo.html
Check this one Centre colour is changed
to snow
Which tape have you used in the boundries
Saludos , un amigo mando hacer un trabajo con resina exposica , con madera real dentro ,,,,, pero despues de un par de dias el tope , empeso a curbar y se a deformado,,, ya que no le diero suficiente cuerpo de resina abajo de la madera ,,,, ,,, que se puede hacer en esete caso
What exposy resin you used?
In Which material u made the mould.. it's just osm.. ❤️
Base is with plywood and side covered with sheet
@@CADVICAENGINEERING alluminium sheet or steel sheet..??
Steel
What do you used as mold around the table?❤❤❤
Bottom marble
Side 0.30 metal sheet
Sealed silicon
Superb.... how did you make the mold 🤔🤔
base is round plywood and side is .2mm sheet with silicon covered
Браво.
very nice!! What exactly did you put around and down for mold?
We use plywood as base and side is covered with metal sheet
@@CADVICAENGINEERING what kind of metal sheeting? Did you line it with anything?
Hi what’s the mould material on the sides and below please if you cud mention thankyou
Bottom mdf round
Side thin metal sheet
That’s fantastic, what did you use to make the edge of the mold please
.2 mm metal sheet
How much quantity use to mix resin nd hardner?
Looks great! Were the insides of your metal sides covered with tape as well? Also what mold release do you use?
What was the bottom of the mold? How much epoxy did you need for that? Where do you get your expoxy?
100k🔥🔥🔥
Good morning from SE Louisiana 27 Oct 21.
Magnificent
Thank you for the support ❤️
@@CADVICAENGINEERING👍🏻👍🏻
What is the red material used to surround the table so that it does not spill over
Oh it's a metal sheet
Which tape did u use for th boundaries, what is it called ?
Thin metal sheet or it can use polycarbonate sheet
Anyway need to apply
Mould release wax
How is the mould made. What material is used to make the mould
Base is plywood side are covered with sheet
good job man!
Thank you
Hi there what material did you use to make the mold? Thank you
Wat mold release agent n 2mm sheets for sides kindly elaborate
0.3 mm metal sheet
Great project 💪💪💪💪💪
Oi essa fita que vc delimita o círculo qual é por favor? parabens, adorei
Qual material e usado pro molde para nao grudar a resina na hora de tira ?
Love this but shouldn’t you have proper safety gear on? PPE
Cómo se llama el material con que hace las paredes del molde?
What is that "2mm sheet - side cover" made of?
Cool😉
Thank you very much 💓
Can u share the details of the blades u used in this project for polishing....?
We made it with a polycarbonate sheet piece
സൂപ്പര് 👍
Thanks
What tools do you use to do this? And what brands of products? Bc I’d like to do something like this myself 👏🏽🙌🏽🤙🏽