Knowing these cars only too well, the "key" here was the tiny cracks in the seam sealer. The ones that got over-filled (which is all you can do, it's not a criticism). Those tiny cracks will have allowed moisture in over the years, which then sits, trapped inside the sill sections - it's a "merc" thing, but loads of other makes do the same). That moisture will then have started corrosion inside the sills. In a while, unless you do a REALLY thorough job of coating the inner sills, the cavities under the wings, all around the firewall cavities & all the chassis box sections using a probe & cavity rust-killer, rust will work its way from the inside out. Most bought cavity-treatments don't work well, if anything they make matters worse - we ended up making our own that does work - so no matter how shiny it looks on the outside, it's the hidden stuff that matters. We get ones in that look absolutely stunning - totally mint at a glance - until you go probing the hidden stuff. The hidden stuff is more important than the shiny paintjob - you can always re-paint it, but if the structure is ruined, you can do very little beyond a massive re-build. Just my 2c.
If I was the cars owner, or any classic car/vans owner, I'd spend 2k getting every cavity treated properly before I touched the outer bodywork, because otherwise you're just putting lipstick on it.
この時代のベンツ本当かっこいい
流石、社長だねぇ!
細かい所迄目が届いて凄い!!
クオリティが高いよね。
グリル上のオーナメントは、ラジエーターキャップだった頃の名残らしいですよ!
昔はグリル自体がラジエーターだったので!
ありがとう、素晴らしいリリース!あなたは本当の魔法使いです!🦀
ヤバいなぁ。鬼のカッコよさ。
センス良いと思います。
W123 body is one of the best body styles MB came out with.
今週もお疲れ様です
週末の楽しみ
ナイスですね~👍 ナイスですね~👍
Old school car, nice wheel rims and new paint = verry goood work.
素晴らしい👏 これで乗りたいね😊
あなたの作品が大好きです、ビデオをありがとう..!!
いつもご苦労さまです🙏
クールなベンツになりましたね👍
シャコタンとBBSが似合います。
ナイスですね~www
凄い!私だったら気が短いので、サンドブラストに突っ込んで終わり!ってしちゃうなあwww
非常に良い仕事!ここに任せたい!
Nice work as always guys. Arigato
Very nice job well done
Love this color!
bravo 👏 guys you do good job 👍 hard work always brings good results 👍
白から紺へガラッと変わりましたね😁キレイ😋
good job man 💪
You Tube特有の聞き飽きた過剰な効果音もなく、BGMの音量も適正で視聴しやすいです。
使用したグッツ、ケミカルや工程は字幕入れて貰えたら有り難いです。
68“SEクーペ現役で走ってます。親父の形見・・・GS1000S(白/青)と、 近所の方に貰ったVF1000R・・大型二輪免許持ってないので部屋に飾ってますww 元・鈑金屋+整備士・・副業レストア 役に立ってますww
45年前450SEL乗ってました😁懐かしい〜😭
Good job! But why did you change the color? The original the better.
あたしもベンツ欲しかった。
Knowing these cars only too well, the "key" here was the tiny cracks in the seam sealer. The ones that got over-filled (which is all you can do, it's not a criticism). Those tiny cracks will have allowed moisture in over the years, which then sits, trapped inside the sill sections - it's a "merc" thing, but loads of other makes do the same). That moisture will then have started corrosion inside the sills.
In a while, unless you do a REALLY thorough job of coating the inner sills, the cavities under the wings, all around the firewall cavities & all the chassis box sections using a probe & cavity rust-killer, rust will work its way from the inside out. Most bought cavity-treatments don't work well, if anything they make matters worse - we ended up making our own that does work - so no matter how shiny it looks on the outside, it's the hidden stuff that matters. We get ones in that look absolutely stunning - totally mint at a glance - until you go probing the hidden stuff. The hidden stuff is more important than the shiny paintjob - you can always re-paint it, but if the structure is ruined, you can do very little beyond a massive re-build.
Just my 2c.
If I was the cars owner, or any classic car/vans owner, I'd spend 2k getting every cavity treated properly before I touched the outer bodywork, because otherwise you're just putting lipstick on it.
Классная работа 🔥
教えて下さい。
20:01でトランクパネルの裏側に取付してある三角停止板の様なアイテムは何と言う製品ですか?
40年物の三角停止板が壊れたので買い替えたいので色んな物を探しています。
かっこよ。セカンドカーやな
欲しい😮
プロの仕事は見ていても気持ちが良いですね
乗れる身分になった事は無いけどね
値段と日数はどれ位何でしょうか。
Nice bro...
ここまでやっていくらくらいなんだろ?
Doko Fairlady Z ?😭
錆びてますよ!ここ錆びてますよ!エヘヘって、めっちゃ喜ぶやんw
😍😍😍
Kakkoiiiii from Hungary😎✌
Hello, can you share what the product name/number is at 12:47?
S30Zの後継がないのはなぜ?
Color?
W123今ウチにやって来ました🎉 0:28
毎回チラチラ映るミラが気になる中々完成しなてないから
いいね🎉
赤ってクリアまじ剥げる、樹脂部分は特にひどい、ツラい
،respecte top
とんぼ を思い出しました😬
んっ( -_・)? あれは560だったかなぁー🤔
ベンツと言えば280っすよね!
日本万歳、日本人万歳!...long live to Japan 🇯🇵 long live to Japanese
Вообще не понял о чем говорят))
Wtf language is it 😂
Wonderful work 👍👍👍
8分位の溶接の所は何か処理してもらった方が良いかと思います
ギャングはベンツ乗らないだろ⤵️
とよちゃんガレージ!
仕事とは言え、こんな面倒くさい事良くやれるよ。
not original 👎
パールコンク5B、スノーホワイト細目 イサム塗料じゃん もっと良い塗料にしたら☝️今はシッケンズが純正塗料かな
素人だな
マスカー貼る時は前から貼ってその上に後ろのマスカー被せるんだよ☝️