Rav4 Gen 5 - Curt Trailer Hitch Install **Solo DIY!! [No Muffler Drop]**

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ก.ย. 2023
  • Learn how to install a Curt Trailer Hitch (Model 13416) on a Generation 5 Toyota Rav4 (2019-2023).
    Product Page:
    www.curtmfg.com/part/13416
    Install Instructions:
    assets.curtmfg.com/masterlibr...
    Thanks for watching!!!
  • ยานยนต์และพาหนะ

ความคิดเห็น • 14

  • @stevenkukene9970
    @stevenkukene9970 20 วันที่ผ่านมา

    This video helped me install the same hitch on my Rav. Thanks for the help.

    • @Jet_Finder
      @Jet_Finder  20 วันที่ผ่านมา

      Thanks for watching!

  • @ianmorris2539
    @ianmorris2539 9 หลายเดือนก่อน

    Nice video!

    • @Jet_Finder
      @Jet_Finder  9 หลายเดือนก่อน

      Thanks!

  • @Josh_James76
    @Josh_James76 หลายเดือนก่อน

    Nicely made video. Do you have a 4 or 6 cylinder. And I am curious to know what you pull with it? Thanks Joshua

    • @Jet_Finder
      @Jet_Finder  หลายเดือนก่อน

      Hi, this is a 4 cylinder, but this Trail edition has a towing capacity of 3500 pounds. Some day I plan on getting a small trailer for a boat, but for now it's just there as a recovery point if I ever needed it as there are no tow hooks on this model. Thanks for watching and the kind words!

    • @Josh_James76
      @Josh_James76 หลายเดือนก่อน

      @@Jet_Finder mine only has a 1500 lb towing capacity so I'm still debating on getting a hitch or not again nice video though.

  • @davidcarlin3850
    @davidcarlin3850 2 หลายเดือนก่อน

    Why would you grease the holes? Wouldn’t you want to put some type of a sealer lock so the bolts don’t loosen up over time ?

    • @Jet_Finder
      @Jet_Finder  2 หลายเดือนก่อน

      I did that more to clean the threads not as a lube. I checked after 2 months and they were still tight. Thanks

  • @jacklennon6447
    @jacklennon6447 3 หลายเดือนก่อน

    Hi.
    I was working for 3 hours today... and I failed..
    I'm going to try again next time.
    The reason I failed...
    Both sides won't go in at the same time..
    If you fasten the bolt on one side
    The trailer hitch on the other side is not going in..
    No matter how hard I try, I can't...
    I ask for your help.

    • @Jet_Finder
      @Jet_Finder  3 หลายเดือนก่อน +1

      Hi. Try supporting at both ends or ask for help. I put in 1 passenger bolt first just enough to hold it up and then went to the driver side. It does take some wiggling around but eventually it will go in. Screw on the bolts just a little to hold it then when they are all started you can tighten them down.

    • @jacklennon6447
      @jacklennon6447 3 หลายเดือนก่อน

      @@Jet_Finder Thank you.
      my rav 4 (2019)
      passenger side so on our vehicle we have It has a tow hook.
      Do I have to remove the tow hook and work on it?

    • @Jet_Finder
      @Jet_Finder  3 หลายเดือนก่อน +1

      Yes I saw another video and they removed the tow hook. Your hitch will become the new tow hook

    • @jacklennon6447
      @jacklennon6447 3 หลายเดือนก่อน +1

      @@Jet_Finder Thank you!