I've been using Zabbix running in a Docker container on one of my Synology NAS units for nearly a year. It is truly an awesome tool and I was rather surprised when one day it notified me that a port on one of my switches changed to a slower speed. When I check the switches in my network rack, I noticed that the port that Zabbix informed me about, had gone from Gigabit speed to 100 megabits. It turns out I had an intermittent faulty patch cable, which I otherwise might not have immediately noticed (but Zabbix immediate did).
@@HoekNoot I used the documentation from Docker Hub for all the environmental variables, etc. One really important thing is to use the host network for the Zabbix server container and not the bridge network. Otherwise your devices won't be found. Put your database on the host network as well so you can access it via its port number. The Zabbix web container can be on either, but I put it on the bridge network so I can use Web Station to assign it a name and a different port. Hope this helps.
I've successfully installed a Zabbix server on my Raspberry Pi 3 to monitor all my VPS. The setup looks fantastic now, and it's all thanks to your insightful video. Much appreciated!
@SpaceRexWill can you send screenshot of dashboard or anything, trying to decide if will build my own but not seeing any images and if anything more than metrics, value is usually in visualization and comprehensiveness... I've written extensions for other network gear in the past, tbh insight isn't bad..its just spread out too much and not complete
@@SpaceRexWill Delighted to hear that! You do a terrific job on your videos and I look forward to an installation tutorial with great anticipation. Please consider an installation tutorial specifically focused on running Zabbix in a Docker container on Synology. You are THE MAN when it comes to synology, so this would totally be in your wheelhouse. I have a DS1821+. I have successfully installed Grafana, but I am unable to get the Zabbix plug-in working in Grafana. I've been spinning my wheels for a while now and haven't cracked the code on how to get it working yet. Thanks again, Will and I'm grateful for all your helpful and informative videos.
Just a note... There is no need to add the port 10051 to the active host as Zabbix has 10050 for passive and 10051 for active checks out of the box.. and i think they are registered to Zabbix those 2 ports. and the only reason to add a port is if you dont use the defaults.
Amazing stuff - way over my head. (My friends call me a geek). I just do scheduled tasks, UPS status and disk analysis on my synology which emails me periodic reports. Great video Spaceman 👍👍👍
hi spacerex, i wonder for this stunning content from you, and can u make a video on how to configure setting alerts on windows host, and monitoring things with servicenow integration, thnx for this videos
I installed Zabbix into 7.1 Docker and it migrated over to 7.2s Container manager. On both DSM's it stops running in less than a minute and is tenaciously uninstallable. It has become my most hated Docker container ever due to this. Will watch the tutorial, and hopefully I can get it working but at the moment I need a way of nuking this currently useless app.
😮 Wow. Thanks for sharing. I wish we could snapshot the state of our entire DSM and restore like before you installed something in a situation like this.
I have that as well, but does it provide such metrics about the state of the devices or network? can't seem to find that feature hence my interest in Zabbix
I've been using Zabbix running in a Docker container on one of my Synology NAS units for nearly a year. It is truly an awesome tool and I was rather surprised when one day it notified me that a port on one of my switches changed to a slower speed. When I check the switches in my network rack, I noticed that the port that Zabbix informed me about, had gone from Gigabit speed to 100 megabits. It turns out I had an intermittent faulty patch cable, which I otherwise might not have immediately noticed (but Zabbix immediate did).
Nice can you tell if you have a site that says how to install it in docker (synology)
@@HoekNoot I used the documentation from Docker Hub for all the environmental variables, etc. One really important thing is to use the host network for the Zabbix server container and not the bridge network. Otherwise your devices won't be found. Put your database on the host network as well so you can access it via its port number. The Zabbix web container can be on either, but I put it on the bridge network so I can use Web Station to assign it a name and a different port. Hope this helps.
Your videos are so useful! Thanks for all you do!
please do a tutorial on how this is setup please. I can never get this working
please Rex
Yes! Please make a Zabbix install video for us.
I've successfully installed a Zabbix server on my Raspberry Pi 3 to monitor all my VPS. The setup looks fantastic now, and it's all thanks to your insightful video. Much appreciated!
Please do a video on setting up and monitoring a NAS, Unifi and client setup covering the proxy option you mentioned
I had been waiting for this for a while. Thank you!
Its awesome to setup and use!
Solid tutorial! Thank you for sharing your zabbix knowledge with us.
Which template are you using for synology? Linux snmp? I think we can custom create something nicer...
There is a synology template I found at one point and downloaded, it works pretty well overall
@SpaceRexWill can you send screenshot of dashboard or anything, trying to decide if will build my own but not seeing any images and if anything more than metrics, value is usually in visualization and comprehensiveness... I've written extensions for other network gear in the past, tbh insight isn't bad..its just spread out too much and not complete
would love to see an installation guide. I can't find anything that I can follow like I can follow your guides!!
Planning on making one at one point!
@@SpaceRexWill same thing for me...can't get this thing to run on the DS923+ :)
@@SpaceRexWill Delighted to hear that! You do a terrific job on your videos and I look forward to an installation tutorial with great anticipation. Please consider an installation tutorial specifically focused on running Zabbix in a Docker container on Synology. You are THE MAN when it comes to synology, so this would totally be in your wheelhouse. I have a DS1821+. I have successfully installed Grafana, but I am unable to get the Zabbix plug-in working in Grafana. I've been spinning my wheels for a while now and haven't cracked the code on how to get it working yet. Thanks again, Will and I'm grateful for all your helpful and informative videos.
Do you recommend using a server with Zabbix installed or using a Zabbix docker container?
Just a note... There is no need to add the port 10051 to the active host as Zabbix has 10050 for passive and 10051 for active checks out of the box.. and i think they are registered to Zabbix those 2 ports.
and the only reason to add a port is if you dont use the defaults.
Amazing stuff - way over my head. (My friends call me a geek). I just do scheduled tasks, UPS status and disk analysis on my synology which emails me periodic reports. Great video Spaceman 👍👍👍
What template are you using for Unifi? There doesnt seem to be a built in one.
Always wondered what zaabix was--definitely going to play with it now!
Can this be used on an air-gapped network?
Yes!
hi spacerex, i wonder for this stunning content from you, and can u make a video on how to configure setting alerts on windows host, and monitoring things with servicenow integration,
thnx for this videos
Zabbix RDP monitor tutoria pls help me
thank you! great video!
This is a great video!! Thank you
we dont want, but we ~~neeed~~ a guide on how to install this amazing thing in a container :))
containerizanion is overrated and dead soon
Good video. I've never heard anyone speak in boolean before ...and....and...and...or...or...and... 😉
installing zabbix on linux was just like installing xammp on windows XD
I installed Zabbix into 7.1 Docker and it migrated over to 7.2s Container manager. On both DSM's it stops running in less than a minute and is tenaciously uninstallable. It has become my most hated Docker container ever due to this. Will watch the tutorial, and hopefully I can get it working but at the moment I need a way of nuking this currently useless app.
😮 Wow. Thanks for sharing. I wish we could snapshot the state of our entire DSM and restore like before you installed something in a situation like this.
You may want to check the logs. When I have seen this in the past its normally a permissions issue
Uptime Kuma is my Homelab monitoring service of choice
I have that as well, but does it provide such metrics about the state of the devices or network? can't seem to find that feature hence my interest in Zabbix
@ekowlloyd hetrix Black Friday sale code bf2024
25'00''' - "This has to match whatever is in your table". Errrr - what 'table'?
I think it's so silly I made my online name and then later on found this company that spells it with two B's. I even pronounce it the same way too!
The "and"s in spacerex's language 😂
Hi everyone!
Zabbix 5.0
Do you support monitoring KVM and VMs? I need help from everyone, I'm so tired of this
1:46 *cough cough REDDIT cough cough*
👍🏻👍🏻👍🏻👍🏻👍🏻
Can't get this to work.
published a video how to deploy zabbix on synology A-Z