Tutorial IXIO-D - Opening & safety sensor for sliding doors (tuto)

Find out how to install the IXIO step by step.
STEP 1 Mounting on door 00:45
STEP 2 Adjusting infrared safety field 03:40
STEP 3 Adjusting radar opening field 04:40
STEP 4 Further adjustments 06:15
STEP 5 ZIP code 09:25
The IXIO-D is a dual technology sensor for sliding doors.
Discover all our sensor solutions on www.bea-sensors.com

[@dyl46225]

It's really interesting how if you just pay a little more attention to things in life your perspective changes drastically. Pretty cool tech!

[@garretthigginbotham6122]

Amazing sensor

[@bea-sensors-europe]

Thank you Garrett !

[@cibinmathewphilip5533]

Can u show the wiring of the sensor with control panel

[@bea-sensors-europe]

Hello Cibin Mathew Philip,
you will find the wiring diagram at the page 3 of the user guide.
You can download it here : eu.beasensors.com/en/product/ixio-d/#downloads
If necessary, feel free to contact our Technical Support Department. They will be glad to help you !
eu.beasensors.com/en/contact-form/?subject=Technical%20support

[@waleedwaleed-tx3xw]

Dear Bea sensor (Europe)
How to programming the door sensor for entering one way only
Best regards

[@bea-sensors-europe]

Hello Waleed. Thank you for your question.
« One way » should be set through the door, not on the sensor. Hope it helps!

[@suvrajitgangopadhyay2139]

Hi I am using a IXIO - ST. The red LED (Safety) is working but the green LED (motion detection/AUX) is not. Please advise. Also, please explain how motion detection is done on a IXIO - ST, since it doesn't have a radar feature. I read that in the ST sensor the green LED means AUX. What does it mean? My door is not opening because I got no green LED activation. That's my problem. Thanks

[@bea-sensors-europe]

Hello Suvrajit, please contact our technical service for this specific question, they will help you right away: eu.beasensors.com/fr/contact-form/?subject=Support%20technique

[@maithadavid575]

​@@bea-sensors-europe please can you help me with the cable color code for positive terminal, negative,common ,no/nc for BEA Zensafe sensor,also the Stanely controller then encoder display shows for a short time then start blinking no number displayed it's blinking red how to solve this issues please need your assistance

[@waleedwaleed-tx3xw]

Pleas how to delet spot sensor

[@tnnazar]

Press the grey button 2 times quickly or wait for few mins it will switch off itself.

[@waleedwaleed-tx3xw]

Please ho to fix error L1

[@bea-sensors-europe]

Please check the door controller, our sensor's error start with E. You can also have a look at our user's guide: eu.beasensors.com/wp/wp-content/uploads/2018/06/ug-ixio-dt1-v3-en.pdf

[@samsami1130]

hello, i need the instillation for this sensore on Dorma es200 easy, i cant find it