I wish I had that set up!! Or at least a jaw crusher! That really all I need to get started full time! Great work bro! I wish you where my neighbor because I'd bet we would be playin in dirt everyday!!
This is an impressively concise digest of most of your previous videos. Very appropriate for a conference. I'm still waiting with baited breath to see Cerro Gordo Galina process. 🙏
Ever thought of using iron filings from a brake disk/drum lathe? I'd think that any brake service would give all of that to you that you might want, and you could put in a predetermined amount of iron in your flux and present the maximum surface area for reaction in any given ore that you are smelting.
Some of my fondest memories growing up were flying from SFO>SEA, driving to Bellingham and snowboarding on Mt. Baker. Had no idea it was so rich with metals. Party on 🤘🏼
Thats amazing! I love this video. I've been struggling extracting my gold from the raw rocks I ve got. And its been so difficult for me to do this. I ve got so many rocks with gold , copper, and iron and silver in them pyrite also in some of the rocks. I would love to have a machine to make things easier for me.
hello, thank you for your best video, Is it possible to use an iron stick directly with sulfate-filled ore without treating the ore to perform direct smelting?
When you start to find 6 sided Gold crystals you'll find the source. Usually inbedded in opalised impact flows. Most can't find the source because they just don't know.
I looked on your website it doesn’t say how much that smaller set up with the Honda engine cost how much does the smaller set up with the Honda engine cost
With cost of mining and transporting ore and with 25 kw of power use concentrating and cost of smelting I wonder what the % per ton of ore is needed for a profit?
120% see I get my numbers crossed up too, I just want to know how small it should be 30-50 mesh basically ??? got my little 10or 12 kilo setup, with the wool inside and greenpatch21'ed it up, burners on both sides but I do like your kaowool, cheap and you can make it as fat as you like
Very interesting video I am new at this, I have been metal detecting on my land and have found nuggets was not sure of content but I have melted one with gas and oxygen torch and have gold and silver in them probably other metal's as well what would be best way to separate the metals I prefer non acid if pos
I see that you're local!! I watch a lot of your videos. Very good information. I'm new into the refining game. About 6 months in. I have a little trouble with a couple things. Would you entertain some trade work or maybe some equipment for some schooling? Or gold? I'm based out of Tacoma. I'd travel to you. I build pneumatic conveying systems. I would appreciate a chat!
what is the price of sand in your area? recently, sand becomes expensive products worldwide, especially those don't contain salts. ie sea sand after wash. and you have tons of it. talk to your local construction builders, they may be interesting to your cache of sand and small and unique size stones. probably make some money to foot the fuel cost too.
Hi Jason, great video!!! But can you do a video on large smelts of 100 or even 200 grams of encapsulated materials. Thanks again, your videos help us out so much! We are in Mexico and are in need of flux, please recommend to us where to buy.
@@mbmmllc now all I need is a cone mold and some crusbles Tks for info I’m from Alabama I got couple buckets of black sand that has micro gold in it want to assay it
Good for you for not useing mercury.Mercury is so bad here in arizona that all our lakes and fish have mercury and the game and fish have warned all anglers not to eat more than a few ounces of fish
Just had a look at your website and couldn’t find the mini mills like the one shown in this video. Can I just a price on that mini mill with the fine gold sluice attached. That would work just nicely for my future adventures
Did you try to smelt collected slag second time to see if all the gold was extracted first time clearly? And thanks for cupeling with cement method, for those who dont have access for MgO cupel.
How often do you clean out the tailings pond? and would there be some sort of residual minerals gold ect. that have been concentrating/building up?. I have watched many of your videos and maybe i missed out on something containing this subject matter, anyways, You provide a lot of good informative and educational content keep up the good work. From Cali...
@@nowhere474 Just a reminder that the government confiscated (i.e. STOLE) citizen's gold in the past. Also, congress' inquiry at finding out how much gold is in Fort Knox was met with 'I don't know.'
@KD0CAC Not a magnetic belt, a magnetic feed system. The feed rate is controlled by -magic- magnetics. In this system, it is not necessary to remove magnetics. That is all done on the shaker table. The table separates by density, and gold is 6-8 times heavier than sand, 5-6 times heavier than magnetic sand, 3-5 times heavier than steel. The table washes all the lighter stuff into the #3 and #4 ports, and the heaviest stuff (mostly gold) go in the #1-#2 ports.
@@KD0CAC it's not stating the obvious, nor is it obvious. I do recall it was you who asked a very broad question. My answer was spot on to your question. You failed to ask a good question. I am a wise man who always admits mistakes, I am sorry and I was wrong that you are offended at my attempt to teach you something. Just keep in mind, the answer to your question may have not been for just you. The whole point of MBMM sharing videos is to educate, the point of process is to experiment and learn.
Love your work Jason. Did you come up with the system to extract the gold from the ore? Or is this basically the process for everyone who recovers gold this way?
Pretty typical general setup but the devil is in the details and Jason's group has demonstrated tremendous ability in metallurgy, machinery, and process settings. Screen sizes, gpm, feeder rate, table tuning are all a project unto themselves even if someone gave you all this equipment. Mistakes lead to the gold going to one of the waste streams or the concentrate being filled with tailings.
Great videos man very informative and interesting and just awesome to see all the methods you use and ways you experiment it’s awesome you have a hell of sweet job as I’m sure you know!
I like that you don’t use a lot of toxic chemicals to refine gold. Your videos are interesting
I've seen a fair few of your vids now and every vid I learn something new. Great work.
Are you going to show smelting the Galena from cerro gordo ghost town?
So simple yet so refined.
Thank you so much!!!!! I have been looking forever for a method without toxic chemicals.
It's hard to have a bad day when Jayson and mbmm is doing a smelting video.
I wish I had that set up!! Or at least a jaw crusher! That really all I need to get started full time! Great work bro!
I wish you where my neighbor because I'd bet we would be playin in dirt everyday!!
This is an impressively concise digest of most of your previous videos. Very appropriate for a conference.
I'm still waiting with baited breath to see Cerro Gordo Galina process. 🙏
Ever thought of using iron filings from a brake disk/drum lathe?
I'd think that any brake service would give all of that to you that you might want, and you could put in a predetermined amount of iron in your flux and present the maximum surface area for reaction in any given ore that you are smelting.
Some of my fondest memories growing up were flying from SFO>SEA, driving to Bellingham and snowboarding on Mt. Baker. Had no idea it was so rich with metals. Party on 🤘🏼
Jason your the man! Thank you for your informative videos. Can’t wait until you next video.
Thats amazing! I love this video. I've been struggling extracting my gold from the raw rocks I ve got. And its been so difficult for me to do this. I ve got so many rocks with gold , copper, and iron and silver in them pyrite also in some of the rocks. I would love to have a machine to make things easier for me.
How did you get started? Any advice? Thank you for your reply. 😊
Omg I thought u said smuggling at first. 😂
I like the way you are melting gold mate it's just very simple 99 percent I'm sure you recover all of it.
Thanks for sharing this video..i am very impressed of the experiments..great.God bless
Over the years I’ve used aqua Regia. However tbuu it s process seems so much easier and safer to use.
My go
Your procedure is the best
hello, thank you for your best video, Is it possible to use an iron stick directly with sulfate-filled ore without treating the ore to perform direct smelting?
Another great episode thanks mate 👍
@@pnnedbymbmmllc4775 this is a scam acount profile picture has been stolen
شكرا على الموضوع اخ جزاك الله خيرا ياستاذ حفظك الله
Really cool thanks Brother that helps so much to know how different processing can make all the difference 😊difference
Great thanks from Africa. You made us love mining.
Keep your great work going and benefit the world !
I sure like your 'no acids & chemicals' process.
Until he starts smelting anyway. That's pure chemistry.
@@ErgonBillyou are also chemistry, I think you get the point
When you start to find 6 sided Gold crystals you'll find the source. Usually inbedded in opalised impact flows. Most can't find the source because they just don't know.
Love your channel, all the best and merry Christmas 2021.
This is amazing.. I found these stones buried under my late grandfather’s garage.. Very massive.. Any idea how I can sell..?
I guess I'm not sure after you smelt the gold what do you do with the Coppell cuz it's got silver and letting it do you recover that metal 2
Thanks a lot for your rich information
I looked on your website it doesn’t say how much that smaller set up with the Honda engine cost how much does the smaller set up with the Honda engine cost
سلام استاد
استاد جهت ذوب طلای سنگ شما معمولا از چه فلزی برای رسوب طلای ذوب شده استفاده میکنید متشکرم
With cost of mining and transporting ore and with 25 kw of power use concentrating and cost of smelting I wonder what the % per ton of ore is needed for a profit?
My respect for you 👍Jason
Amazing Jason! thanks.
That's awesome. I have found gold ore but not sure how much gold is in it.
Very intresting. For the Quartz. I never see like this process. Great 👍how much this Equipment. Materiel for maining.
120% see I get my numbers crossed up too, I just want to know how small it should be 30-50 mesh basically ??? got my little 10or 12 kilo setup, with the wool inside and greenpatch21'ed it up, burners on both sides but I do like your kaowool, cheap and you can make it as fat as you like
How high is the purity level?
Can it somehow close to 99%?
Very interesting video I am new at this, I have been metal detecting on my land and have found nuggets was not sure of content but I have melted one with gas and oxygen torch and have gold and silver in them probably other metal's as well what would be best way to separate the metals I prefer non acid if pos
Short and Sweet!
Great video 👍👍
Did you wet the cement when you made the cupel?
What do I need to do to become a gold smelter
I see that you're local!! I watch a lot of your videos. Very good information.
I'm new into the refining game. About 6 months in. I have a little trouble with a couple things.
Would you entertain some trade work or maybe some equipment for some schooling? Or gold?
I'm based out of Tacoma. I'd travel to you.
I build pneumatic conveying systems. I would appreciate a chat!
My name is levy littrell I have enough platinum and gold ore to make us both rich but no way to process it I need your help
Your hammer mill/shaker table systems are amazing...Great work. I hope you sell thousands of them.
what is the price of sand in your area? recently, sand becomes expensive products worldwide, especially those don't contain salts. ie sea sand after wash. and you have tons of it. talk to your local construction builders, they may be interesting to your cache of sand and small and unique size stones. probably make some money to foot the fuel cost too.
congratulations!!
Amazing
Love this
Great vid mate your set up is awesome. Cheers for sharing 🍻👍🍀⛏
lead or bismuth?
When are we going to see Brent’s Ore???
It’s was sent by snail mail, so maybe not for a little while.
Yeah I was about ask too
Hi Jason, great video!!! But can you do a video on large smelts of 100 or even 200 grams of encapsulated materials. Thanks again, your videos help us out so much! We are in Mexico and are in need of flux, please recommend to us where to buy.
I just want to know where I can get the fire proof material used to make your furnace I want to make my own
Search for kaowool on Amazon
@@mbmmllc now all I need is a cone mold and some crusbles Tks for info I’m from Alabama I got couple buckets of black sand that has micro gold in it want to assay it
I need the smaller setup
Thanks you
Like that you are using the metric system hope this will continue on your other Videos
im lovin your videos ty
Good for you for not useing mercury.Mercury is so bad here in arizona that all our lakes and fish have mercury and the game and fish have warned all anglers not to eat more than a few ounces of fish
What is Bismuth
Just had a look at your website and couldn’t find the mini mills like the one shown in this video.
Can I just a price on that mini mill with the fine gold sluice attached. That would work just nicely for my future adventures
Send us an email at info@MBMMLLC.com and we can send you over some info, thanks
How much price is this machine
Did you try to smelt collected slag second time to see if all the gold was extracted first time clearly? And thanks for cupeling with cement method, for those who dont have access for MgO cupel.
Zhizn Derevenckaya Istor : why he used the non-annohyrus borax flux ,so gold molten would globulate together has it decended !
Роберт Фиелдсимов
sir, kemana perginya logam pengotor?
great explaining
How often do you clean out the tailings pond? and would there be some sort of residual minerals gold ect. that have been concentrating/building up?. I have watched many of your videos and maybe i missed out on something containing this subject matter, anyways, You provide a lot of good informative and educational content keep up the good work. From Cali...
You want some raw Gold Crystals? 6 sided. From source deposits to test?
How much the whole system?
I would love to see some smelting of large amounts of gold. Thank you for your content.
Personally speaking, the reason why you'll NEVER see that is, THE IR$.
@@nowhere474
Just a reminder that the government confiscated (i.e. STOLE) citizen's gold in the past. Also, congress' inquiry at finding out how much gold is in Fort Knox was met with 'I don't know.'
@@HorkSupreme
That's why I don't report what I have to GOVERNMENT
Besides keeping GOLD in a LIQUID ACIDIC state, confuses the shit out of people
Looking good fam. Keep the dream alive fam. Gold squad out!!!
Another great video
enjoyed watching your video nice gold buttons
You mentioned the magnetic belt before the hammer mill , but no detail , is it practical to remove magnetics ?
Thanks again
Removing as much base metals as possible is always beneficial.
Wet refining it is a must!
More base metals the higher the cost of refining!
@@uncommonlogic1698 That's stating the obvious and not answering the question , what's the point ego ?
@@KD0CAC I think there may be nano gold trapped in the magnetics
@KD0CAC
Not a magnetic belt, a magnetic feed system. The feed rate is controlled by -magic- magnetics.
In this system, it is not necessary to remove magnetics. That is all done on the shaker table. The table separates by density, and gold is 6-8 times heavier than sand, 5-6 times heavier than magnetic sand, 3-5 times heavier than steel. The table washes all the lighter stuff into the #3 and #4 ports, and the heaviest stuff (mostly gold) go in the #1-#2 ports.
@@KD0CAC it's not stating the obvious, nor is it obvious.
I do recall it was you who asked a very broad question. My answer was spot on to your question.
You failed to ask a good question.
I am a wise man who always admits mistakes, I am sorry and I was wrong that you are offended at my attempt to teach you something.
Just keep in mind, the answer to your question may have not been for just you.
The whole point of MBMM sharing videos is to educate, the point of process is to experiment and learn.
Awesome
Love your work Jason. Did you come up with the system to extract the gold from the ore? Or is this basically the process for everyone who recovers gold this way?
Pretty typical general setup but the devil is in the details and Jason's group has demonstrated tremendous ability in metallurgy, machinery, and process settings.
Screen sizes, gpm, feeder rate, table tuning are all a project unto themselves even if someone gave you all this equipment. Mistakes lead to the gold going to one of the waste streams or the concentrate being filled with tailings.
Bien amico
الاخوان العرب المرجو طلب الترجمة لهده الفيديوهات القيمة
Interesting
Great videos man very informative and interesting and just awesome to see all the methods you use and ways you experiment it’s awesome you have a hell of sweet job as I’m sure you know!
Man this process is awesome!! Very informative!! Thank you!!
Di Sumatra byk bahan baku batu mas cari infestor yg mau kerjasama bro
Thank you Jason 👍
I always appreciate your work.
Gimana carah mendapatkan mesinnya
Great job Jason!
Great job Jason nice gold amount two thumbs
Loving your video!
How can I get the smaller one? I’m in Ethiopia, Africa.
👍 mantap
that's 130%? I get my numbers crossed all the time....
Thanks for sharing brother! Love your channel!
Salut mon ami excellente démonstration bravo merci beaucoup
You really deserve to sell loads of these systems 👍
🍻👍
Very interesting video.
It's all nice and everything cause it's gold but how much money is wasted to make a little , it's not the most viable way to make money
Admittedly, I am not wearing my glasses, but you look like Parker Scnaubel, from the History Channel.
Very educational, thank you.
A ND I have 0 dollars I'm depending on this to survive e
great video, thanks for sharing
He’s got around 200$ in gold right there
Hy l am from assam India .
i need🎉🎉❤