I figured out how to stop the non stop beeping for low temp. The factory setting for low temp sensor is 2 degrees so if the machine fluctuates below that 2 degrees the machine will start to beep. My machine is at a steady 100 degrees but will drop to like 95 for a second which maybe is a faulty sensor but I adjusted the low temp sensor to 10 degrees so if it goes below 90 it will start to beep. Press and hold the menu/ok button Select “AL” Adjust temp to 10 degrees instead of 2 Just check the machine to make sure it’s at the right temp every few hours. There should be more videos on this incubator. And I will update if any more problems assist
Bro I have the same one and the humidity gauge cannot be right I had mine set at 50% humidity and the top plastic would stay covered in condensation.. did you ever figure yours out?
I figured out how to stop the non stop beeping for low temp. The factory setting for low temp sensor is 2 degrees so if the machine fluctuates below that 2 degrees the machine will start to beep. My machine is at a steady 100 degrees but will drop to like 95 for a second which maybe is a faulty sensor but I adjusted the low temp sensor to 10 degrees so if it goes below 90 it will start to beep.
Press and hold the menu/ok button
Select “AL”
Adjust temp to 10 degrees instead of 2
Just check the machine to make sure it’s at the right temp every few hours.
There should be more videos on this incubator. And I will update if any more problems assist
The one I bought doesn’t have the water gauge on it. How do you get the humidity right in it?
Contact customer service for further assistance.
Wie stelle ich die Luftfeuchtigkeit ein? Bitte helfen Sie mir
I need to know
I can't seem to shut the alarm off on this unit. any suggestions?
i pulled it out :)
@@Antonietta-TMQuails-NHhow you pull it out please
Check my most recent comment
And it doesn’t have the air holes in the lid that you’re supposed to be able to open what am I supposed to do?
Please contact customer service.
I am gonna drill couple holes. No ventilation really on this unit
@@Antonietta-TMQuails-NHI did mine recently idk if successful
Hola me podéis explicar como funciona esta encubadora en español
sabes donde conseguir el manual en español a cuantos grados tiene que estar ??
Does anyone know how to reset this machine?
Un bideo bien como se arma y como funciona
I need helps what put all settings following on list it been annoying alot of noise
Bro I have the same one and the humidity gauge cannot be right I had mine set at 50% humidity and the top plastic would stay covered in condensation.. did you ever figure yours out?
I removed the beeper and replaced it with an LED light. No more noise.
how to turn off the sound of this machine ?
@@Soontucare to elaborate on how you did that?
How did you remove beeper. It's annoying me .
@@Soontu
En español porfa vor alguien me puede explicar
En español