How to Paint Your Engine Cover
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- We are going over the steps to paint an engine cover for a 2020 Mustang GT. The cover in this video is a custom made cover, however this process is universal and can be used on an OEM cover. The paint and primer used is an Engine Enamel which resists temperatures up to 500°F; overkill for an engine cover.
Note:
Enamel paints have a recoat window. A recoat window means you only have an allowable time frame in which you can apply each coat of paint. After this time frame, Enamel must fully cure which usually take about one week. The surface must then be scuffed before another coat is applied. Dupli-Color Enamels have a 1 hour recoat window.
1. Intro - 0:01
2. Step 1 (Remove Engine Cover) - 0:14
3. Step 2 (Scuff Surface) - 0:44
4. Step 3 (Rinse/Clean Surface) - 1:16
5. Step 4 (IPA Surface) - 1:29
6. Step 5 (Apply Adhesion Promoter) - 1:43
7. Step 6 (Apply Primer) - 2:17
8. Step 7 (Prep Surface) - 3:18
9. Step 8 (Apply Base Coat) - 3:41
10. Step 9 (Scuff Surface (Lightly)) - 5:12
11. Step 10 (Rinse/Clean Surface) - 5:33
12. Step 11 (IPA Surface) - 5:44
13. Step 12 (Prep Paint Area) - 5:58
14. Step 13 (Prep Surface) - 7:49
15. Step 14 (Apply Base Coat (Offset Color)) - 8:01
16. Step 15 (Remove Tape/Drop Cloth) - 8:39
17. Cracking Mistake (Rookie Mistake) - 9:35
18. Step 16 (Prep Surface) - 10:05
19. Step 17 (Apply Clear Coat) - 10:17
20. Step 18 (Install Engine Cover) - 11:21
21. Show it off! - 11:47
Paint Supplier:
www.automotive...
Products Used:
This video contains affiliate links for which I may receive compensation.
========== Paint Products ==========
Adhesion Promoter - www.automotive...
Engine Enamel Spray Primer (DE1612) - amzn.to/49PWLCv
Engine Enamel Spray Ford Dark Blue (DE1606) - amzn.to/42UQwuV
Engine Enamel Spray Clear (DE1636) - amzn.to/3Tflkn9
========== Misc. Products ==========
91% Isopropyl Alcohol - amzn.to/414EgY8
Black Nitrile Gloves - amzn.to/3TvBVjI
Disposable Drop Cloth - amzn.to/3wqJ1xk
Exacto Knife - amzn.to/42Y6QeI
N95 - amzn.to/3wApPQf
Painter's Tape - amzn.to/3MvGM1b
Respirator - amzn.to/3MOE08f
Sandpaper (60-5000grit) - amzn.to/47XJFlI
Scuff Pad Variety Pack - amzn.to/3ST8Ik7
Tack Cloth - amzn.to/3TiAR2W
Trim Removal Tool Set - amzn.to/35Lry84
Tools:
91% Isopropyl Alcohol
Disposable Drop Cloth
Exacto Knife
Microfiber Cloth
Nitrile Gloves
Painter's Tape
Respirator
Safety Glasses
Sandpaper (600-1200 Grit)
Shop Towels
Soap and Water Solution
Tack Shop
Trim Removal Tool Set
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on TH-cam is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on TH-cam. Use this information at your own risk.
#EngineCover #Mustang
Great job!! That cover is a lot nicer than my 2019 GT cover. The '19 is hideous.
Thank you very much. A few people asked about making a carbon fiber cover. How do you think that would look? Maybe blue weaved carbon fiber.
@@mcgurrentertainment Blue Carbon fiber (if its real) is one of the most beautiful materials for cars. If you have the skills and means...DO IT!
Thank you for the feedback. I might have to give it a go
Awesome stuff. Looking forward to seeing if you can get a good mix for Kona 👀
Thank you!!! I have a few good ideas in mind 😉
Great tutorial. It's looks amazing
Thank you!!
Looks great
Thank you very much
Looks awesome.
Thank you very much 😊
Our painted in my plastic trim I have let it dried for 48 hours after my three coats.. The paint I bought did not have high enough gloss, I have purchased a high gloss and some 2000 grid sandpaper..
My question is: before I apply The clear coat, I wet sand correct? After I wet sand, I wipe clean with alcohol and then add the clear coat? Am I correct?
It's not a requirement. However It's typically a good idea to scuff the surface (of a fully cured product) before applying fresh coats. This gives the paint or clear a surface to adhere to.
Simply put...AMAZING, great job and love both custom engine covers! By the way, can you tell me where I can find the strut tower covers on both 5.0s? I noticed you have a different set than on the Kona blue one. Thank you!
Thank you very much. That's a great question, we ordered them from www.custompony1.com/
He does lots of custom work, and the product always comes out looking great.
@@mcgurrentertainment Awesome, thank you!
Anytime 😊