Want to see what is included, Unboxing video: th-cam.com/video/tmloUYwWsq0/w-d-xo.htmlsi=obGv4F9YWSo8dmch How well does it follow? Watch my test video th-cam.com/video/FVmoeUFpDrM/w-d-xo.htmlsi=kRGAw2p5u5GoMgku
You're welcome. The one thing to not forget is to make sure all axis points are unlocked when powering on. I love how good it is for tracking. moza Aircross 2 didn't even compare. The Xbot Go is a sports tracker it does okay using my mobile phone but it has limitations. The review of that one should be out in a few days... On my tech channel... I think the outdoor tracking video of this one is on my tech channel as well.
@@AllThingsFilm1 Are you using a proper tripod? Did you setup the auto configure? Is your lens heavy that it might have a hard time balancing? Here is my testing outside video th-cam.com/video/FVmoeUFpDrM/w-d-xo.html
@@AllThingsFilm1 for other adjustments I sadly did not make anything and sadly I am far away from the studio where my gimbal is while I am attending electrical training. Mind you I wasn't really doing handheld either my camera after this video was no longer a Sony ZV1 which is way lighter than FX30 but my current Fujifilm X-S20 has in body stabilization.
Awesome, glad I could help. Have any question about studio and filming equipment feel free to ask. Mostly have audio reviews but when I get back to the Studio I have a pile of recording and movie making equipment to review... Last video was on my Fujifilm X-S20 camera... What camera are you using? Cannon? Sony?
I went to shooting today but surprised to unfind my vertical tilt lock , idk where is it or how it got lost how can I replace it , I got this isteady recently, I'm so down please help if u know
that's not fun. Some cameras require the setting to be set or a restart. I've been luck with my Olympus M1 MKII, Sony ZV1, Fujifilm X-S20 all flip modes automatically... as well as my mobile phone.
I have the M2 i have a sony a7 iii and in portrait mode ICP function does not work the motor seem to struggle have you tried portait mode and used ICP. I like see a video on this because i cannot get this working
I am also out of the studio and left my gimble there, not going back till mid February 2024 at the soonest. I am completely my electrical certification as an electrician. Still doing videos, but I didn't really have much room for packing.
I can not honestly say I used any side or top handle for the MT2 but the NEEWER Gimbal Sling Handgrip. Looks like it would fit to the screw hole and little holding tab that it has.
I could totally use a camera cage still vertical or not. Not sure if I am missing something in your question. There is a mount plate that comes with this weather you install horizonal or vertical and camera cages don't stop you from mounting to a camera tripod mounting plate.
@@sparkestudiowhen I said cage I was referring to the L bracket that came with the gimbal. I've watched several videos on balancing the MT2 but you're the first I've seen that takes the bracket apart. I guess if one were to never shoot vertical that would work.
@@steveloudon7491 oh now I get you... I don't shoot vertical but I did one time with that L bracket removed. In which case I used my camera CAGE as a mount point lol. I still have the L bracket in the pouch for the gimbal.
Ok, got the Gimbal today, watched the Hohem balancing video and yours, I have the Gimbil balanced and it is working great. My only concern and I am not certain if this is normal or not but if I tilt the handle to the left or to the right as in lean it to the left or right the camera wants to roll out of control rather than stay steady. Is that normal for a Gimbal to do that? Thanks in advance.
If I am understanding correctly maybe your camera is heavy? There are adjustments for weight within the settings. Not sure what your lens is like, and if you have a lens that extends and you happen to balance when your lens is not extended for instance it throws the gimbal off balance... You can also upload a video and send a link on discord or on Facebook to me... I have links and both are free access
@@sparkestudio Actually, I am using a Insta360 Ace Pro Action Camera (think Go Pro). So if the gimbal handle is straight up and down and I lean the handle to the left or right is when the camera comes off of horizon and the gimbal can't control it's own movements. I hope I explained that correctly? Thanks for your reply.
@@ScottHirschman Sorry I have not a clue, have you checked the different menus like POV to find out if your issue is a setting? Sadly I am not back at the studio for 1 more month where my gimbal is. I am a 20 hour drive away from home attending my year 4 electrical training. If you are on Vancouver island in BC Canada by any off chance I could help in person.
I can't be of much help at the moment since I am out of town at work for 4 more days otherwise I would have you write me on discord or Facebook and I would send you pictures of the main 2; plate types. I do discuss plate types on my Cayer K10 Pro fluid head review. The Acra Swiss plate is far smaller than the other and has groves on the sides cut in that hold it down. The Manfrotto plate type is of course the larger and generally used is larger better tripod heads since they hold more secure. If you have a small camera like a Sony ZV-1 or a mobile phone. If you google "camera plate types" and look at images 90% or more are going to be one of the 2 types. I have the gimbal the MT2 at my studio back home. I literally work 14 days straight and have 6 and a half days off and back out of town for 14 days again. Have to pay for all these items I buy.
Hey, all I am trying to use a go pro 8 black with the mt2. I am having a very hard time balancing it to get it to work. anyone on here know how to do this? if you can make a small video to show me that would be great. Thanks Philip
There are different mods POV and others. Maybe you're on the wrong mode? I can't check the settings on my own, I am out of town working as an electrician on a new power plant.
@@davidpoo66 you don't take it apart. You just fold it in a manner that it goes back to its shape for storage. I put it back in the package last week before I left town. I can't even make you a video to help, I am literally away from my studio for another 11 days. I have to pay for my tech on this channel and my tech channel somehow. Spent enough to buy a truck in full since 2019 to now that is $90K out of my pocket in 5 years.
@@WolfikCZ it still works. Think about how you are the first and ONLY person to even specify this. Balancing is not a "forced" order. Following an order can make it easier for someone not experienced.
I balanced the sections that need to be balanced. if my camera was too large could have slid out the bottom. Balance steps are all the same if that were to knock out any balance.
@@WolfikCZ my bad if I forgot to show it. Sadly there is zero changing an old video unless I am a big channel where unlike me they can inject corrections. Linus Tech Tips has done that several times. For me all I can do is delete or re upload a new video.
![Hohem iSteady MT2 Gimbal: REVIEW - TUTORIAL [Mobile, Mirroless and Action Cameras]](/img/n.gif)
Want to see what is included, Unboxing video:
th-cam.com/video/tmloUYwWsq0/w-d-xo.htmlsi=obGv4F9YWSo8dmch
How well does it follow? Watch my test video
th-cam.com/video/FVmoeUFpDrM/w-d-xo.htmlsi=kRGAw2p5u5GoMgku
Thanks for this video - had a nightmare trying to balance my ZV-1 and this was the only video I found that enabled me to do it. Much appreciated
Nice, same camera. Glad I could be of assistance
Excellent video! Got my MT2 yesterday and still having a hard time to balance. This video helped a lot! Thank you!
Awesome, glad I could help.
Thank you for your video. I just picked up this gimbal so I'm pretty excited about using it. I will report back my experience. Cheers. Happy 2024.
You're welcome. The one thing to not forget is to make sure all axis points are unlocked when powering on. I love how good it is for tracking. moza Aircross 2 didn't even compare. The Xbot Go is a sports tracker it does okay using my mobile phone but it has limitations. The review of that one should be out in a few days... On my tech channel... I think the outdoor tracking video of this one is on my tech channel as well.
@@sparkestudio Thanks for the heads up on the axis points being unlocked when powering on. Cheers.
I just did my first run with the gimbal. It was a little shakey. What is the best way to fine tune the gimbal to get it properly balanced?
@@AllThingsFilm1 Are you using a proper tripod? Did you setup the auto configure? Is your lens heavy that it might have a hard time balancing?
Here is my testing outside video th-cam.com/video/FVmoeUFpDrM/w-d-xo.html
@@AllThingsFilm1 for other adjustments I sadly did not make anything and sadly I am far away from the studio where my gimbal is while I am attending electrical training. Mind you I wasn't really doing handheld either my camera after this video was no longer a Sony ZV1 which is way lighter than FX30 but my current Fujifilm X-S20 has in body stabilization.
thank you, i watched so many of these videos and your video was the first one that made sense
Awesome, glad I could help. Have any question about studio and filming equipment feel free to ask. Mostly have audio reviews but when I get back to the Studio I have a pile of recording and movie making equipment to review... Last video was on my Fujifilm X-S20 camera... What camera are you using? Cannon? Sony?
I went to shooting today but surprised to unfind my vertical tilt lock , idk where is it or how it got lost how can I replace it , I got this isteady recently, I'm so down please help if u know
Hi spark e studio, horizontally inception mode works, when i take it vertically that mode doesn’t work with my mirrorless camera
that's not fun. Some cameras require the setting to be set or a restart. I've been luck with my Olympus M1 MKII, Sony ZV1, Fujifilm X-S20 all flip modes automatically... as well as my mobile phone.
I have the M2 i have a sony a7 iii and in portrait mode ICP function does not work the motor seem to struggle have you tried portait mode and used ICP. I like see a video on this because i cannot get this working
Did you get it working in normal mode? Remember to unlock all the moving sections or you'll get an error code.
I am also out of the studio and left my gimble there, not going back till mid February 2024 at the soonest.
I am completely my electrical certification as an electrician. Still doing videos, but I didn't really have much room for packing.
Can you recommend a side and/or top handle accessory for the MT2 gimbal ?
I can not honestly say I used any side or top handle for the MT2 but the NEEWER Gimbal Sling Handgrip. Looks like it would fit to the screw hole and little holding tab that it has.
Thanks a lot!! 👌🏽👌🏽👌🏽
So you aren't using the "cage" if you're not doing vertical, is that correct? I've been wondering about that since I've started looking at this gimbal
I could totally use a camera cage still vertical or not. Not sure if I am missing something in your question. There is a mount plate that comes with this weather you install horizonal or vertical and camera cages don't stop you from mounting to a camera tripod mounting plate.
@@sparkestudiowhen I said cage I was referring to the L bracket that came with the gimbal. I've watched several videos on balancing the MT2 but you're the first I've seen that takes the bracket apart. I guess if one were to never shoot vertical that would work.
@@steveloudon7491 oh now I get you... I don't shoot vertical but I did one time with that L bracket removed. In which case I used my camera CAGE as a mount point lol. I still have the L bracket in the pouch for the gimbal.
Ok, got the Gimbal today, watched the Hohem balancing video and yours, I have the Gimbil balanced and it is working great. My only concern and I am not certain if this is normal or not but if I tilt the handle to the left or to the right as in lean it to the left or right the camera wants to roll out of control rather than stay steady. Is that normal for a Gimbal to do that? Thanks in advance.
If I am understanding correctly maybe your camera is heavy? There are adjustments for weight within the settings. Not sure what your lens is like, and if you have a lens that extends and you happen to balance when your lens is not extended for instance it throws the gimbal off balance... You can also upload a video and send a link on discord or on Facebook to me... I have links and both are free access
@@sparkestudio Actually, I am using a Insta360 Ace Pro Action Camera (think Go Pro). So if the gimbal handle is straight up and down and I lean the handle to the left or right is when the camera comes off of horizon and the gimbal can't control it's own movements. I hope I explained that correctly? Thanks for your reply.
@@ScottHirschman Sorry I have not a clue, have you checked the different menus like POV to find out if your issue is a setting? Sadly I am not back at the studio for 1 more month where my gimbal is. I am a 20 hour drive away from home attending my year 4 electrical training. If you are on Vancouver island in BC Canada by any off chance I could help in person.
@@sparkestudioI'm in Pittsburgh, PA. I'll shoot a video later showing the effect.
I don't understand arcadia plates completely, does this gimbal comes with one? Thanks!
I can't be of much help at the moment since I am out of town at work for 4 more days otherwise I would have you write me on discord or Facebook and I would send you pictures of the main 2; plate types. I do discuss plate types on my Cayer K10 Pro fluid head review.
The Acra Swiss plate is far smaller than the other and has groves on the sides cut in that hold it down. The Manfrotto plate type is of course the larger and generally used is larger better tripod heads since they hold more secure. If you have a small camera like a Sony ZV-1 or a mobile phone. If you google "camera plate types" and look at images 90% or more are going to be one of the 2 types. I have the gimbal the MT2 at my studio back home. I literally work 14 days straight and have 6 and a half days off and back out of town for 14 days again. Have to pay for all these items I buy.
Hey, all I am trying to use a go pro 8 black with the mt2. I am having a very hard time balancing it to get it to work. anyone on here know how to do this? if you can make a small video to show me that would be great. Thanks Philip
very helpful! Thank you
Those settings don't appear when I click on the orange aperture icon at the bottom, it just goes directly to the camera app view.
I am guessing you have an Apple phone? Apple is strict as heck and wouldn't allow Hohem to place Ads like they have done on the Android APP.
No I have a Google Pixel 3 XL. @@sparkestudio
hey man I have a question, when I film it saya error 03 although I balanced it quite well. do you know what the problem is?
I mentioned this error in my video... Like very quickly (easy miss) that if you do not unlock ALL lock points you are going to get an Error 3.
@@sparketech ooh okay thank you
I cant get mine to move horizontal, and the lcd screen says unlock. Everything looks unlocked, advice please?
There are different mods POV and others. Maybe you're on the wrong mode? I can't check the settings on my own, I am out of town working as an electrician on a new power plant.
@@sparkestudio No thanks I figured it! Now I can't figure out how to store it, take it apart?
@@davidpoo66 you don't take it apart. You just fold it in a manner that it goes back to its shape for storage. I put it back in the package last week before I left town. I can't even make you a video to help, I am literally away from my studio for another 11 days. I have to pay for my tech on this channel and my tech channel somehow. Spent enough to buy a truck in full since 2019 to now that is $90K out of my pocket in 5 years.
@@sparkestudio Thanks, I kind of figured. I'm close to getting it right.
the guy is balancing it wrongly. The first balancing should be with camera pointing upwards, not straight
@@WolfikCZ it still works. Think about how you are the first and ONLY person to even specify this. Balancing is not a "forced" order. Following an order can make it easier for someone not experienced.
Very nice Gimbal.
I really like the tracking feature, it works very well. It does not have full compatibility with my camera
Thank You
Handsome❤
Top se top gimbal good
You didn't balance 2 of the axis!?
I balanced the sections that need to be balanced. if my camera was too large could have slid out the bottom. Balance steps are all the same if that were to knock out any balance.
This thing is DESTROYING ME. I always get an error3
Make sure all your axis are unlocked or it is always going to error 3. If it cannot self level that something is jamming it, the error occurs.
@@sparkestudio ahhhh, so you mean AFTER I level everything, I lock it. Then UNLOCK them before turning on?
I DID IT!!!!! Thanks bro!!!!!
You got it!
U forget balancing verticalaxis man…
@@WolfikCZ my bad if I forgot to show it. Sadly there is zero changing an old video unless I am a big channel where unlike me they can inject corrections. Linus Tech Tips has done that several times. For me all I can do is delete or re upload a new video.
Error 01
Unlock the gimble axis points... all of them when you power on the gimble and there is no longer an error