TXES01 series compressor--Compressor head
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- How to assemble the compressor head and do some checking.
1. Check every O-rings inside, make sure to be fine, or may have the water leaking.
2. Clean it if we see some debris as maintenance after long time use
Wow...very good. Sealing ring poston. What's the material? Vespel plastic? Thanks
Mine is leaking on the air inlet! How to repair it
I bought the same compressor but I see in the video in one of the small pipes there is filter and cap to hold it mine doesn't have filter there all pipes are empty is that OK to work normally?
Olá amigo, estou com pobrema com o meu compressor, ele está vazando direto pelo suspiro esquerdo, ???
punyaku TXES011 tekanan cuma 2000psi dan itu pun pengisian lama... kira kira yg diperbaiki sebelah mana...
Any videos on TXET061-1 in future ?
yes, of course
افشل كمريسر في العالم أنصح الجميع بعدم شرائه
Ok i have a couple of problems with this video as an engineer and airplane mechanic that made me cringe. First the tubes your pulling out by the end with harden plyers were the matting surface meet not good practice. Second you don't use or give torque specs for you compressor like the 6m head bolt is 16.8 Nh.
They also cut away when separating the head. Why? Because you have to beat the crap out it to get it to move. Destroying the little plastic washer.
Mine in 3 hour (one hour or less in different days just to top of a 90 ci air tank)
of use it couldn't go to 4000 psi pressure ,it only went to
3000 psi and then the pressure needle didn't even move at all. Its blowing air with out pressure.
Have change the head 2 time.
And the second one did the same
What the problem.????
.
did you fix it? I'm having the same problem... air is moving, no liking but no pressure... almost 50 bar after 3-4 minutes, only to fill the pipe....