I have a 4 pin plug on the forklift charger and need to change it to the 5 as my socket has 5 holes however there are only 4 wires coming out our the charger, Black, Brown, Grey, Yellow/Green. How can I wire this into a 5 pin plug?
@@MrM4Goo we only do as filter for our commercial and technical departments. All the info needed should pass through sales@battipav.com in order to receive detailed and proper replies. Thank you for understanding!
L¹ & N is the same position as its Single ∅ CEE commando Plug counterparts. For Plugs, looking from the terminal wiring side, with PE prong downwards, L¹ on Left ,while N is on Right. L² & L³ will rotate Sequentially After L¹ Until it Reaches N.
Can I use 5pin plug for single phase ?, problem is in my local area its only 32a plug available, but my generator is 40a 220v single-phase PE pin for PE L1 and L2 for Live L3 and N for Neutral
No, you wouldn't do that. If your CEE Socket & Plug are 5prong but you are utilising 1 ∅ only, then: PE prong for Earthing wire N prong for Neutral wire EITHER L¹, L² or L³ (choose any one) for your Line(live) wire .
Dear Mr. Higgins, Thank you for your message! Please send all your enquiries to the email address: sales@battipav.com We will be glad to assist you! Battipav
Dear Evert, the important thing is to connect the yellow/green wire to the ground and the blue wire to neutral one. The other wires can be of different colors and connected in the preferred sequence. Best Regards
Ferrules are a legal requirement in UK on stranded fine cable, soldering is not allowed as creates a weak joint that WILL fail. This assembly method fails a PAT test :)
good video, but the "wrong plug"(316-6) can sometimes be the right one, yesterday I replaced an old illegal outlet (Semko 17) with a 316-6 because the cable just have 4 conductors (3P+E). I know some cheat and install a 416-6 outlet without a Neutral but I would never do it
Dear Mr. Pontus, Thank you for your message! Our machines are designed to be connected to 5 pins cables . Other kind of power supplies, not provided for by the manufacturer and not indicated in the instruction and maintenance manual are not allowed, failing which the warranty void. Best Regards BATTIPAV
Use the ferrule with the flexible (multiwire core) cables!!!
I have a 4 pin plug on the forklift charger and need to change it to the 5 as my socket has 5 holes however there are only 4 wires coming out our the charger, Black, Brown, Grey, Yellow/Green. How can I wire this into a 5 pin plug?
You just Not connect any wires to the N terminal of the CEE 3P+E Plug.
where can one find an adapter from a three phase European generator 5 plug 230v to a USA type 4 plug at 220v
Hi. Can i wire a standard uk plug to one of these 5 pin sockets? Just Live, Neutral & Earth. If so how do i do it? Thanks in advance.
Does it miss labeled L1 and L3? Shouldn’t L1 and N next to earth?
Hello Lei, for any technical request please write to sales@battipav.com, thank you!
Why make the effort to even reply to the many comments on here if you wont even answer the simple questions asked ?
@@MrM4Goo we only do as filter for our commercial and technical departments. All the info needed should pass through sales@battipav.com in order to receive detailed and proper replies. Thank you for understanding!
agree, my EU three phase has L1 and N next to earth. I was totally confused watching this video
L¹ & N is the same position as its Single ∅ CEE commando Plug counterparts.
For Plugs, looking from the terminal wiring side, with PE prong downwards,
L¹ on Left ,while N is on Right.
L² & L³ will rotate Sequentially After L¹ Until it Reaches N.
Knowledgeable vedio.
Can I use 5pin plug for single phase ?, problem is in my local area its only 32a plug available, but my generator is 40a 220v single-phase
PE pin for PE
L1 and L2 for Live
L3 and N for Neutral
No, you wouldn't do that.
If your CEE Socket & Plug are 5prong but you are utilising 1 ∅ only, then:
PE prong for Earthing wire
N prong for Neutral wire
EITHER L¹, L² or L³ (choose any one) for your Line(live) wire .
What about when the plug has a pilot pin? What is it used for an if not needed can you leave the terminal blank?
Dear Mr. Higgins,
Thank you for your message!
Please send all your enquiries to the email address: sales@battipav.com
We will be glad to assist you!
Battipav
Pilot pin is used on some supplies to engage a contactor that then switches the power on. Useful for motors so you do not connect whilst live.
Pilot contact is available in 63A and 125A plugs and sockets. Kind regards...
Thank you 👍🙃
I have only black blue and brown wires How can i connect that?
Grazie per condividere
that plug is eouropean plug not Australian plug
Dear +gamo98, for any question or enquiry, we kindly beg you to send an email to: sales@battipav.com
We will be glad to assist you!
Best Regards
A gdzie tulejki kablowe?
I love TH-cam
What is cable name and spec?
Thank you for your interest! Please forward all your request to the email address: sales@battipav.com
We will be pleased to assist you!
He already asked you once why would the OP want to send another message to ask the same question again
I have 3 black and 1 yellow sir
If you need assistance, please send an email at sales@battipav.com we will be glad to assist you!
the 3 black shoud be numbered. L1 = 1, L2 = 2, L3 = 3, (L4 = N), E = E
i have 2 black wires and no white one
Dear Evert, the important thing is to connect the yellow/green wire to the ground and the blue wire to neutral one. The other wires can be of different colors and connected in the preferred sequence. Best Regards
Ok thanks sir
And you don't connect stranded cables like that... you use ferrules or soldering iron!!
Ferrules are a legal requirement in UK on stranded fine cable, soldering is not allowed as creates a weak joint that WILL fail. This assembly method fails a PAT test :)
Hii sir
good video, but the "wrong plug"(316-6) can sometimes be the right one, yesterday I replaced an old illegal outlet (Semko 17) with a 316-6 because the cable just have 4 conductors (3P+E). I know some cheat and install a 416-6 outlet without a Neutral but I would never do it
Dear Mr. Pontus,
Thank you for your message!
Our machines are designed to be connected to 5 pins cables .
Other kind of power supplies, not provided for by the manufacturer and not indicated in the instruction and maintenance manual are not allowed, failing which the warranty void.
Best Regards
BATTIPAV
sorry, I missed the part that you make machines. yes you are right, I'm limited to use old machines or machines that don't use Neutral
Battipav
Thank sie
Not correctly!
Wrong side of the world. If I were back in Germany, this would have been useful.
Hello! where are you from? Please fill this form and we'll try to help you at the best:
battipav.com/en/contacts/