Omg I am a heating engineer . This was a refreshing change A plumber who takes pride in his work and does a superb job . And one who can use copper and solder a Fu?ing fitting well done mate great job
great job mate.always good to see pride in some ones work.and no snotters on the soldered fittings!even from the merchants my copper never looks that shiny!
Would love it if you done a detailed tutorial video on pipe bending. Don't think I've seen better pipe work anywhere. Seriously impressed with your work!
This is amazing,stunning job , If u r from somewhere in Manchester and looking for a free labour for one day a week I m more then happy to work with u.
Thanks buddy, most of the comments pickup on the discharge. Though part of the basic schematic, the prv isn't actually part of g3 regs, I didn't add a tundish intentionally as it doesn't need one, it discharges in plain sight. I haven't bothered explaining this to everyone as I can't be arsed to argue 😂 I've dealt with people like this on social media for years. I mainly ignore them now, I spend my time more wisely helping people who actually want to learn rather than like you say, prey to find something wrong with an install... have a brilliant Christmas mate, and thank you for the support
@@UnequaledHeating I know very little about plumbing but am learning as we are about to extend and renovate our house. I hope our plumber does such a tidy job. That pipework was super smart 👏
I have been a plumber for 20 years and that is a top notch install! Your pipe bending is spot on! Can you do a tutorial on it and also what’s the brand of pipe supports you’re using in the loft? 👍
Top job lads, I've been a heating engineer/plumber for 33 years, I was lucky enough to be taught by proper tradesmen, my Dad was very fussy about his pipework and workmanship which was drilled into my training, excellent work, would be pleased with that job. I noticed you didn't use the expansion connection on the cold set? 👍
Have you tried Condensate Pro for your external condensate pipework? Very neat, very quick to use and UV resistant I’m going to use it on all mine where required now.👍👍.
Very neat! What the name of the industrial looking metal pipe clips and the trunking they attach to also i saw on another video a fixing type strap that goes between the floor joists to attach pipe clips to?
D1 is above d2 in a straight line, separated only by the tundish, as long as he has no more than 500mm D1 and at least 300mm before Bend on D2 then it’s all good, he had both correct 👍
Really nice job , top class but do you make any money ? I hope you do , you deserve too but with all the rough arses out there throwing jobs in it must be hard
Wow what an amazing job lads I've been qualified for 2 years now I live very close to Heathrow and would love to work with you guys please don't hesitate to contact me if you need someone to work for you. Thanks guys Please keep posting great videos like this one there's a lot to learn. Thanks again
Outstanding pipe work and installation Tony well done mate ♥️♥️♥️👍🏼🙂
That pipework is pure art
Omg I am a heating engineer . This was a refreshing change A plumber who takes pride in his work and does a superb job . And one who can use copper and solder a Fu?ing fitting
well done mate great job
k20aa you sound like my mate he takes pride in his bending skills 😂
Amazing work Matey 👏🤝👏🤝👍👍
WOW! Mate your piping is on another level! Top man! If only all plumbers had pride in their work like yours.
thats a very good job - proper workmanship
Have been installing for nearly forty years, I would be proud of that installation.
Very nice installation
Really nice job. The D2 pipework is incorrect, prv from combination valve should go in before tundish.
excellent job
great job mate.always good to see pride in some ones work.and no snotters on the soldered fittings!even from the merchants my copper never looks that shiny!
Instant subscribe.
Bravo mate.
Keeping the content simple, Good music and the craftsmanship is second to none.
Wow love the job and pipe work well done guys
Very very impressed with the work and workmanship that went into this job beautiful well done lads
Looks lovely, i personally sacrifice the look to get that combination valve above any cylinders, however yours looks superb x
Rob Nanco, Lorne Stewart’s finest .🤙
@@elwittinio2865 lol hope ur well x
That's a crisp job! It's a shame the pipework needs to be insulated because it looked awesome!
Would love it if you done a detailed tutorial video on pipe bending. Don't think I've seen better pipe work anywhere. Seriously impressed with your work!
Excellent Workmanship !!
Very good pipe work , first impressions mean a hell of a lot and generate considerable work by word of mouth alone
Cracking job as always T!
Absolutely stunning job. Humble too. Respect.
Excellent job tanx for the upload plz keep them coming👍
Super clean work!!!
You should make a video on how you mark your bends
Stunning install that!
Awesome install, great Craftsmanship.
Wow what amazing work we'll done mate u can't go wrong with rubber line clips and unistrut
Great job lads looked spot on !!!
Awesome bends 👍
Fantastic job mate.
that is beautiful to see lad, nice job
Absolute top class work 👌👌👌
Wow amazing work... Have you ever seen plumbing work in the USA? This level of detail is almost unheard of in the USA.
There's some crack plumbers in US... Eric aune (MH) is up there 👍🏻
This is amazing,stunning job ,
If u r from somewhere in Manchester and looking for a free labour for one day a week I m more then happy to work with u.
If Carlsberg did heating then............
Great install 👍
Nice Job the condensate pipe would have looked even better with Condensate Pro soon to be available form Advanced Water Company
All those plumbers with their microscopes out now picking up faults lol post it takes balls to post your work nice job !
Thanks buddy, most of the comments pickup on the discharge. Though part of the basic schematic, the prv isn't actually part of g3 regs, I didn't add a tundish intentionally as it doesn't need one, it discharges in plain sight. I haven't bothered explaining this to everyone as I can't be arsed to argue 😂 I've dealt with people like this on social media for years. I mainly ignore them now, I spend my time more wisely helping people who actually want to learn rather than like you say, prey to find something wrong with an install... have a brilliant Christmas mate, and thank you for the support
Thanks alot man, means alot, merry Christmas pal
@@UnequaledHeating I know very little about plumbing but am learning as we are about to extend and renovate our house. I hope our plumber does such a tidy job. That pipework was super smart 👏
Tidy job bud! Like to see someone make use of there benders
Very impressive. All joints clean of excess solder. Well thoughtout job.
I have been a plumber for 20 years and that is a top notch install! Your pipe bending is spot on! Can you do a tutorial on it and also what’s the brand of pipe supports you’re using in the loft? 👍
Top job lads, I've been a heating engineer/plumber for 33 years, I was lucky enough to be taught by proper tradesmen, my Dad was very fussy about his pipework and workmanship which was drilled into my training, excellent work, would be pleased with that job.
I noticed you didn't use the expansion connection on the cold set?
👍
Cracking job been in the trade forty years 👍glad am not paying for it Yorkshire lad 🙈😂
Mate, not going to lie, I’d have used about 15 90deg bends on that! That’s extra coinage in your pocket, good work
Boom top work lads
Disgusting how good an install that is. Any future soldering tutorials? What blowtorch head and gas do u use? Doesn’t look like a sure fire one
Have you tried Condensate Pro for your external condensate pipework? Very neat, very quick to use and UV resistant I’m going to use it on all mine where required now.👍👍.
Pro quality. Love it.
Work of art 🖼
Great stuff, I wouldn’t put a isolator off the hot pipe though.
No need , turn cold off and run a tap. Im not a fan of valves on outlets on Unvented cylinders
Shame the combination valve isn’t higher up.
Nice shiny pipe work. Shame it’s got to be lagged.
Very neat! What the name of the industrial looking metal pipe clips and the trunking they attach to also i saw on another video a fixing type strap that goes between the floor joists to attach pipe clips to?
Its just 21mm light gauge channel etc. I go through all the pieces you need in the "hampshire project" Video. Hope that helps mate 👍
@@UnequaledHeating That's great, i'll check that video out, appreciate it thanks mate👍
What tool you normally use when cutting unistrut channel and threaded rod
i use the Milwaukee m12 bandsaw buddy
Boss work
Really neat job lads, attention yo detail second to none. Pretty sure the D1and D2 pipe should tee in within 600mm of each other.
D1 is above d2 in a straight line, separated only by the tundish, as long as he has no more than 500mm D1 and at least 300mm before Bend on D2 then it’s all good, he had both correct 👍
Yes boys! Proper smart!
Do you glue your lagging together? I dont know how you manage to get it to stay so tight to the pipe look around your bends?
Great job mate. How long did it take and how many of you on it ?
Top job boyz
pukka neat job, loving the pipe mounting soloution in the loft, what is it? also the full bores before the aav's.. yes sir; nice.
Great video, great plumber. What blow torch do you use? Keep up the good work 👍
Lovely jod true professional
Very tidy install mate and skills with the benders. How long did the job take start to finish?
Good Vid 👍
Socket in the loft dead ?
That is immense mate , how
Many days did u allow and for how many lads ? Cheers pal , great vid , keep
Um coming ! 👍👍
🙌🏻
Impressive. If only everyone took as much pride in their work as you do! What flux are you using?
Thanks man, Powerflow mate 👍🏻
@@UnequaledHeating was waiting for some one to ask that . looks better then la-co .
Insulation hides all your hard work n effort!
Great workmanship, do you find because of your high standard you loss out on a lot of jobs ??
franco porco just what I was thinking
Wow wow wow,
I m a speechless
Really nice job , top class but do you make any money ?
I hope you do , you deserve too but with all the rough arses out there throwing jobs in it must be hard
Hey .how you?
A good working I'm looking in job in uk can you help me I'm also plumber
Always top draw
What pipe clips are they?
Rubber lined clips and uni strut
Wow what an amazing job lads I've been qualified for 2 years now I live very close to Heathrow and would love to work with you guys please don't hesitate to contact me if you need someone to work for you. Thanks guys
Please keep posting great videos like this one there's a lot to learn. Thanks again
Prv discharge is wrong 🤷 everything else is fine
That’s filth