Hello Gian Sagasti. I have been in love with venetian plaster since 2019 when I first had the chance to see it for the first time. Time came for me to paint my living room and I was ecstatic to find venetian plaster in America. My husband and I ordered it and did all the work that you know is needed. We applied three coats of the venetian plaster and then I took on the task of burnishing with a trowel while my husband was applying last coat on some of the walls. The walls were looking really good with some small spots here and there where the walls were not perfectly straight, (but is what we had to work with). Because of some small imperfect areas my husband used a sand paper to fix it. Then I went to burnish it again but it didn't make it shiny like before. He even used one of those electrical tools to polish it but I had to stop him because it was leaving some streaks on the wall. We applied a thin layer of wax and he used the electrical tool with a different soft pad to polish it but it doesn't look near as shiny as your sample or any other video I've watched. I am completely heart broken because the end result is not like what I've seen and we don't know what to do and how can we fix it? Please help us and tell us what can we do now to make it really shiny. I tried to go over the wax with the trowel but it doesn't look like there is any difference? How many coats of wax can we apply? Please, please help us. The walls now have some spots where they are shiny, some spots they are not that shiny, some spots have streaks looking like on top and overall it looks like there is just some grease over the walls. This is a desperate call for advise.
Very nice job I like it. I just want to know which material (I mean plaster ) did you use. If I want to buy where can I buy this material please guide me. I really appreciate. Thanks.
Did you plaster? Is that how you got into this. I've done a bunch of hard coat jobs and ran molds. In the trade 30+ years. Stucco also. I seen a guy back in the day when it was hard to find the material then unless the guy from Italy was bring it with him. But this guy I seen used colored furniture was and it looked damn good. Trialed it done for him he ran a similar system as you it was like a buff color tan. Wouldnt tell what he was getting paid lol. But nice work bro. Always wanted to try it out.. thanks for sharing.
Funny you said this separates the boys from the men. I actually started learning venetian when i was a boy. I've done two jobs. One was fiori at vitruvian park and the other was at the Dallas orchestra symphony
Se puede dar muchísimo más brillo y un acabado superficial mucho más parejo similar a un espejo , sin manchas ni áreas "peladas" , si aplica más capas de Veneciano y luego lija con lijas finas hasta dar una superficie totalmente lisa y pareja , luego se aplica betún neutro y se retira con la espátula ,por último se pasa la polichadora. Claro que es mucho más trabajo físico pero el resultado es un 100% mejor. Ahí si se diferencia entre aficionados y profesionales de verdad,. Saludos desde Colombia .✌️🇨🇴
Hello sir I am stucco designer from india Karnataka mangalore I need information about purchasing products like yours please tell me who to contact to get this.
Hello Gian Sagasti. I have been in love with venetian plaster since 2019 when I first had the chance to see it for the first time. Time came for me to paint my living room and I was ecstatic to find venetian plaster in America. My husband and I ordered it and did all the work that you know is needed. We applied three coats of the venetian plaster and then I took on the task of burnishing with a trowel while my husband was applying last coat on some of the walls. The walls were looking really good with some small spots here and there where the walls were not perfectly straight, (but is what we had to work with). Because of some small imperfect areas my husband used a sand paper to fix it. Then I went to burnish it again but it didn't make it shiny like before. He even used one of those electrical tools to polish it but I had to stop him because it was leaving some streaks on the wall. We applied a thin layer of wax and he used the electrical tool with a different soft pad to polish it but it doesn't look near as shiny as your sample or any other video I've watched. I am completely heart broken because the end result is not like what I've seen and we don't know what to do and how can we fix it? Please help us and tell us what can we do now to make it really shiny. I tried to go over the wax with the trowel but it doesn't look like there is any difference? How many coats of wax can we apply? Please, please help us. The walls now have some spots where they are shiny, some spots they are not that shiny, some spots have streaks looking like on top and overall it looks like there is just some grease over the walls. This is a desperate call for advise.
Apply another coat then burnish
Yeah resand and redo another coat then burnish them wax and polish
I’ve done a ton of this and this guy did it right. Kept it simple. Did not over work or think it
Nice finishing, i need to learn more of this from you.
Che taloccia originale, non l’avevo mai vista, come partenza , poi l’hai cambiata…… 🤩🤩
You are the best!. From Russia
Bro, your the best entertainer in our craft.
Buen trabajo , grasias por compartir , eres un artista voy intentarlo
I wish his videos would be in order starting with the basics and progressing toward something like this red
Explanation and study and fantastic report
Sick necklace brah. Plaster's cool too.
Excelente trabalho amigo 👏👏👏👊😎
I am an Algerian 🇩🇿🇩🇿dyer. I mastered all the decors. I did not get any chance
Perfect, clean and professional job, can you tell as little bit abut the brand's for plaster and wax that you use/prefer please
Just beautiful what tools are you using for burnishing
Отличная работа!
Hey there
Master plaster love your work. just wondering if you could give us a rundown of what materials you have used
Thanks
Top notch! Wonderful. How long do we wait Before we buff it
Big Gim … a Milano lo facevano quando tu non eri ancora nato , bravo comunque🎃🎃
Beautiful job .
Very nice job I like it. I just want to know which material (I mean plaster ) did you use. If I want to buy where can I buy this material please guide me. I really appreciate.
Thanks.
Grassello marmorino find me In instagram @exoticwallfinishes
@@venetianplasterexoticwallf5313
Did you plaster? Is that how you got into this. I've done a bunch of hard coat jobs and ran molds. In the trade 30+ years. Stucco also. I seen a guy back in the day when it was hard to find the material then unless the guy from Italy was bring it with him. But this guy I seen used colored furniture was and it looked damn good. Trialed it done for him he ran a similar system as you it was like a buff color tan. Wouldnt tell what he was getting paid lol. But nice work bro. Always wanted to try it out.. thanks for sharing.
This guy is real good a no bs guy.
Certe cose lasciatele fare solo a noi italiani 🇮🇪🇮🇪cmq buon lavoro
Que bonito trabajo saludos desde california
Nice......
But one house how manny weeks need to finish?
Does that wax have a negative effect on the "breathability " of the lime?
Love that finish, do you put it on after wet plastering a wall or during
Why do you use a base coat of white? What would be the outcome if you just went on top of the quartz primer.
Very gangster plasterer
🔥💪🏼
Funny you said this separates the boys from the men. I actually started learning venetian when i was a boy. I've done two jobs. One was fiori at vitruvian park and the other was at the Dallas orchestra symphony
Love the finish on this one.
Nice , type of machine to make shining... pls share
Where to buy all that stuff to make it happen???
Do u have flooring products aswell
Stunning, gonna learn this asap
That's excellent work.
Luvly finish what’s the drying time between coats
Se puede dar muchísimo más brillo y un acabado superficial mucho más parejo similar a un espejo , sin manchas ni áreas "peladas" , si aplica más capas de Veneciano y luego lija con lijas finas hasta dar una superficie totalmente lisa y pareja , luego se aplica betún neutro y se retira con la espátula ,por último se pasa la polichadora. Claro que es mucho más trabajo físico pero el resultado es un 100% mejor. Ahí si se diferencia entre aficionados y profesionales de verdad,. Saludos desde Colombia .✌️🇨🇴
It is known that a small area is a large perfection, but if you work on a large area, it is necessary to help, especially in applying dark colors.
Fai il bravo basta gilouzia
@@walidelgharabawi292 Non c'è motivo di essere geloso, anche io sono un tintore e so cosa dire
I also love the egg shell feel of stucco Veneziano after the second layer. What if I keep that in parts of my wall? Can I make it waterproof?
when you put the wax on, of course it is waterproof
I am in Vietnam and want to learn about products, can you help me?
Bellissimo.
Quale carta usi per grattare
Props that looks good
انا صباغ مغربي 🇲🇦 اتقن جميع الدكورات ولاكن لم احظى بفرصة اتمنى ان تترجم كلامي good 👌❤❤
Combien de temps laisse tu sécher la cire ?
Bongiorno, prima di tutto, complimenti per il sui lavoro ! Vorei comprare un fratazzo Come quello su la vidéo, mi puo dire Come fare per favori 👍
Good job beautiful
Hello, where can I get the materials in America, please? And what they call it Is it some kind of paint?
How can I get the plaster.. and the color for it ?
Very gut Job .Super.
🌹God is an artist, an educator, and then we learn. Thank you
🤣🤣🤣🤡🤡🤡
Blast👌 it indeed separate boiz from men
Superb nice
Good job.
Very beautiful
How long to wait the first coat to the second one?
amazing 👏
How long need live to dry first and second time?
Piękne. Chcę się tego nauczyć
Czy w Polsce są dostepne te materiały widzę że w Rosji tak i Ukrainie.
Where can I order your products very interested
Здравствуйте!Где можно купить такую кельму?
What's it matiril... Plz name it paint
Which country product?? I need more details
by the end of the video the necklace was gone, stolen in 5 minutes? 🤔
Can it be applied to an old painted wall??
Use your imagination friend.
Show de bola 😎
👍👍🤝🤝👌👌
please do this on a wall 2.50 meters high and 5 meters long, it will work just as well
#venetianplasterexotic bonjour, quelle peinture utilisez vous comme applicateur ??
Merciii
Bravo 👏🏻👏🏻
Интересно и полезно! Но у нас это нафиг никому не нужно!
What are the materials ?
Tôi rất thích loai son nay va mua ở đau
nice wow
MAGNIFICENT!!!
Nice
Sagasti … bello di zia , ti hanno imparato b’uono!!😇😇
Hello sir I am stucco designer from india Karnataka mangalore I need information about purchasing products like yours please tell me who to contact to get this.
Alguém pode resumir o que ele explicou por favor? Adoraria saber! Agradecida!
Stico 👍👍👍
Não acho fornecedor do produto no Brasil 😭😭😭
How price of this tools please
What is the name of the last added element
Wax
@@elnermin5380
Thanks
@@user-pk7vv7tn1o : Yw
S'il vous plaît vous pouvez me dire où je trouve Spatule comme celle-ci
Any link to the trowel you used to apply?
Any trowl will do , stainless steel and I would recommend new
He’s using marmarintotools.com
👏👏👏👏👏😍😍😍😍😍😍
Ma tu con quella Spatola fai anche la prima e la seconda mano??????
Amico , con i muscoli che ha il palestrato , potreppe farlo anche con uno sci!🥴🥴
Wow top 😍
رائع لكن نسيت شيءً سيجعلها تبدو مرئاتا دون الحاجة لقلبها على الاتجاهات
👌👌👌👌👌
Bravo 💪🇲🇦🇲🇦🇲🇦
Respected sir please I need all these things, I'm from India, please response, I'm a royal play wall designer....
Muito top parabens
👌👏👏
🤩🤩
Master
Muito bonito 👏
Everything is perfect on 50x50cm area, but in nature on big area is not like that.
Omg how come I never thought of that. Ughhh next time do your home work on people before talking.
👏👏👏😍😍😍
Lovely