ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Toyota Sienna Front Control Arm Replacement Removal
ฝัง
- เผยแพร่เมื่อ 3 ส.ค. 2024
- Toyota Sienna Front Control Arm Replacement Removal
► Our Website: mechaniclifestyle.com
Hey guys, in this video we will demonstrate how to remove and replace front control arm on Toyota Sienna. We demonstrated on a 2011 Toyota Sienna XLE Front wheel drive model right control arm removal replacement. The front left control arm will be close procedure as well. This might be helpful for the whole generation from 2011 to 2017:
2011 Toyota Sienna Front Control Arm Replacement Removal
2012 Toyota Sienna Front Control Arm Replacement Removal
2013 Toyota Sienna Front Control Arm Replacement Removal
2014 Toyota Sienna Front Control Arm Replacement Removal
2015 Toyota Sienna Front Control Arm Replacement Removal
2016 Toyota Sienna Front Control Arm Replacement Removal
2017 Toyota Sienna Front Control Arm Replacement Removal
► OUR MAIN CHANNEL: bit.ly/2ad33QG
► BMW E46 ZHP PROJECT bit.ly/2g8tOa9
► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Camera
Panasonic Lumix FZ300 amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable amzn.to/2jjg9Bd
•Computer for editing
Lenovo ideapad 310 amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Second Camera
Sony HD Video Recording HDRCX405 amzn.to/2jk8nqB
•GoPro HERO5 Black amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510 amzn.to/2ktOuB7
This is NOT a sponsored video. Everything is purchased by us!
► Instagram: / worldmechanics
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
At the 3:30 mark for taking out the ball joint, I could not get that out to save myself. This was on a 2011 Sienna with 160,000 miles. I spent over an hour banging on it and it was stuck hard. I torched it with heat and still would not budge. I used a Harbor Freight #63684 Tie Rod and Pitman Arm Puller that I already had on hand and it fit perfectly and I got that darn bolt loose in 1 minute. I hope this helps someone else.
Lol, I am working on the same thing now, I had a pickle fork and couldn't remove it until I jacked the pickle fork.
Great job guys... Easy to follow step by step process. Dealership wanted $2000.00. I'm glad you shared your skills and made it easy to follow along.
2012 Sienna front left & right control arms. Toyota dealer wants $1700+taxes
In Canada $2700 to replace both.
My name is Michael Rowe (Rowe's Restorations) Your Videos are AWESOME Your professionalism and explanatory videos are really second to none!! I had to take a moment to thanQ so much for your videos I have probably wacthed at least 20 of them!! Please Keep up the good work as you make me a better mechanic and help me save my customers money!! Sincerely, Mike Rowe
I live your accent dude!!!
Nicely done.. Thank you..
I really appreciate your video! Very clear and well done. Thank you.
I can't believe how little rust there is. We have a 2005 Sienna in Nova Scotia, Canada, and it's COVERED in rust. Like, every inch of every piece of metal under there.
Very well done! Great video! Transparent step by step orientation. Most of us here to watch this video bc we were shocked with the Toyota dealer price of $1700-$2000 for the job get done. Love the video!
$2750 in Canada for both.
Hey you gentlemen did a nice job on another video. I am wondering if you have any videos on replacing the motor to the linkage assembly in the 2011sienna's sliding door
Well explained!! Thank you :)
Thank you guys for making this video.
thank you so much for vid, what about driver side ? do you have a video ?
Great video!thanks
Thank you for sharing your video very helpful
Thank you for making this video, your step by step explanation (with bolt size) made this an even easier job than it seems to be. I was quoted $1K today to replace both control arms, no way! I’m not made out of money and I have four young children to feed. Feeling ever so confident now!
Great video; thank you.
Any idea about the rubber bushing Toyota part number?
You have nice job and video tutorial guys! Can you make a video on how to remove control arm driver side on Toyota Sienna 2014?
Thank you for your video.
I don't recommend using aftermarket lower arms, I replaced TRQ brand lower arms last year and less than a year later the lower arm rubber boots broke in half and I had to buy original lower arms.
Thank you for the help
Great job
I had the same question that wasn’t answered is the fwd and awd the same steps? Also why does the dealer say you need to remove the transmission to replace it?
I watched your video to find out what size impact sockets we need. My husband's coworker is going to lend us his impact wrench (makes it easier with our super rusty vehicle) and impact sockets, but he needs to know what sizes we need. I heard you say 10mm, 14mm, 17mm, 19mm, 22mm. Are there any that I missed?
Thnks your great wonderful videos I really appreciate it! Can u tell me what type of electric ratchet u are using if 3/8 or 1/4 please tnks
Great video Guys.
Your the best
Is there a difference in 2011 sienna AWD and FWD to replace control arm?
What would happen if one of the ball joints was to come out? Im driving a 2004 with the original ones. Can't grease them because they are factory sealed. The van is making a sound similar to when the struts, upper bearing makes when they are worn out. It sounds like dry ball bearings cluncking while stopping and accelerating and turning, but not when going over potholes. Im not sure if the cluncking sound is coming from the upper strut ball bearing or the control arm ball joints.
What is the tools that you used? Tks for the video
What is the torque specs for engine mount
How about the driver side... the motor mount is attached to the engine different than the passenger side. How do you remove the driver side motor mount?
Jack up transmission and use crowbar to make enough room. There are videos showing it.
Can the ball koint be replaced without replacing the entire arm?
What model year was this Sienna? My wife has a 2004 edition and the first time I removed and replaced the same side lower control arms, I struggled even with a lift and and a jack! Not really sure whether our Sienna had the same motor mount support as this model, but if it has, as after 5 years I need to replace again the same arm, it would be nice to remove it the way you showed it. Thanks.
He says the model year in the first 30 seconds of the video...
What brand was the lower control arm you used?
Mevotech. not a very good brand. not even moog control arms come with a high quality bushing. moog also comes with a lower quality ball joint that cannot be greased because it does not have the grease fitting like their problem solver line does.. Beck Arnley is the best OEM equivalent. the rubber bushing will last you a very long time, very high quality. but they do not come with a ball joint. that's were i would buy a premium moog ball joint with the grease fitting for you to grease. I've tried them all, Beck Arnley all the way.
My control arms were replaced but the stability control light on the dashboard is still on
Which lift point is he using to raise vehicle?
Oil pan with a wooden block. the haynes manual says to do it that way also
Im suscibed
We’re can I buy it
How much charge installation? Change two control frontside
Jigar Patel $2100 including parts at my local Toyota dealership lol
That's a cotter pin
Safety pin?
Cotter pin
😂😂😇
This is the weirdest "R" sound ive ever herd.
makes it too annoying to watch... NEXT!
Gods son Christ Jesus died on thee cross for our sins so that by believing in him we can have life...belief in Christ Jesus be a free gift from the l, given to them ( through thee hearing of his words ) whom He hath chosen for salvation