Man some of those guys were very big not fat just big this was cool video I remember racing my brother in the 70s and my cousins what a blast learning curve thanks dad rip
i used to ride my rupp mini there when it was Mitchell field, on the old runways. in 1968. lived in westbury we used to tear up the woods along the parkway,,,,,
What gears do they run? I want mine to go way faster than it goes now. I tried the stock 10t on and aftermarket 60t but only picked up a mph faster. When I put my 212 on its gonna need to reach at least 90 mph or so. I have a slightly modified 196 on it now. But it also has the stock jackshaft with a 10t clutch, 20t main sprocket with a 10t drive sprocket and a 50t rear sprocket. I even tried the 60t and really didn't feel a difference. But when I put my 212 on I don't plan to use the jackshaft and if I do I wanna go a different route on the jackshaft. But not sure what gears are gonna put me into the 90 mph range
As of now I have the stock tire size, 19x7-8. Some say I need to go smaller. As of now I still have the 196 but it's slightly modified and I have a 10t front and 60t rear. But my 212 is all billet and forged internally. It has a billet rod, forged wiseco piston, stock crank, 275 dyno x cam, titanium lifters, hardened push rods from NR racing, 26 lbs springs, roller rockers, took the governor out, hardened valves, ported and polished head, amr300 supercharger, nitrous, keihin 26mm carb, aluminum intake, racing header, NGK plug, billet flywheel, and a no rev limited coil with a transparent wire which is kool lol. But it's built and almost ready to fire. I have to get more fuel line yet and another fuel pump. It quit working for some reason. But the engine is gonna have plenty of power. Just needs the right gear and the right tire size. I wanna go with a Jr dragster rear tire, but not sure what size to go with. I don't wanna go too big, but yet I don't wanna go too small either. I was also thinking about going with a 3 or 4 disk clutch if that makes a difference on anything.
@bikelifenoah577 yes I will definitely make a video of it. And thanks 😃. I have a lot of money invested in that lol. A little more invested in that than I do my RC car I built lol. But I'll definitely make a video when it's done
This was pretty cool, but no finish line shots! I wish they would have told a little about the little motors. we drag race 300> horsepower motorcycles in the dirt! I can see some special parts on most of the bikes. Very cool and interesting. Bill BBDR DIRT DRAGS 👍👍
Guys, HERE is The Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF” From the Ancient Egyptian Semitic: "Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3) Ancient Egyptian Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
Guys, HERE is The Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF” From the Ancient Egyptian Semitic: "Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3) Ancient Egyptian Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
@@bikelifenoah577 just ordered all the parts for the 212 today! bascially stage 2. I recently put a 212 tilly on a bike with a rattlesnake cam, mikuni 22 and header and thats fun! Good times!
@@johnsmith-zd5he jesus sir, is Lucifer. Revelation 22:16 jesus is the “offspring of David”, jesus, The “Bright Morning STAR”, IS LUCIFER, the “son STAR of Morning/Dawn” (Isaiah 14) jesus and the jesus story is the story of the Fallen of Genesis 6, written by “THOSE” from Israel, where the “gods/Fallen” had “sons” with the “virgin” daughters of man
Yeah but it sure is exhilarating . I have several . My favorite is a 1973 golden pinto . It only runs 41 mph but it does it in 3.8 seconds . Since there is no real suspension you feel it all and it feels like you're going about 150 . It'll actually run 46 mph but that last five mph takes awhile.5.1 seconds total
Guys, HERE is The Savior YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF” From the Ancient Egyptian Semitic: "Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3) Ancient Egyptian Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"
I have two that need them . I have torn up seats footpegs a kickstand and a backrest because they jump out from under you and you can either hang on as the front end comes up and fly the bike down ..... possibly rip your shoulders out of socket or break your wrists......or you can do what an old man like me does in that situation and plant your feet and let go and watch the bike tumble.....then cry when you order parts ....
Super cool bikes my friend!!!-John
Man some of those guys were very big not fat just big this was cool video I remember racing my brother in the 70s and my cousins what a blast learning curve thanks dad rip
Most builders have a jockey actually racing the bike. Im well over 200 I got a 150 pound daredevil that pilots mine
Damn. There was some fast bikes. Tiny little bikes too. That’s nuts.
a lot of great work! keep it up, greetings from Poland
Thank you appreciate it
Awesome bikes !!
I’m still at mod 2 and growing! ❤
i used to ride my rupp mini there when it was Mitchell field, on the old runways. in 1968. lived in westbury we used to tear up the woods along the parkway,,,,,
Ha, we used to do that area with or "stingrays" and banana seats....that would be considered a epic Saturday!
I also know a pretty good road circuit in that area.
I didn't know where to look first . Good show
Best racing I’ve ever watched on mute 👍
Real nice video 👍
What kind of torque converter are you running?
Yo what mini bike frame is that blue one at the very beginning of the video??
The blue one in the beginning is a motovox mbx10
@@bikelifenoah577 thanks 🙏🏼 I just subscribed to your channel.
Is that a 1960s Tote Gote with wheelie bars at 00:46
What gears do they run? I want mine to go way faster than it goes now. I tried the stock 10t on and aftermarket 60t but only picked up a mph faster. When I put my 212 on its gonna need to reach at least 90 mph or so. I have a slightly modified 196 on it now. But it also has the stock jackshaft with a 10t clutch, 20t main sprocket with a 10t drive sprocket and a 50t rear sprocket. I even tried the 60t and really didn't feel a difference. But when I put my 212 on I don't plan to use the jackshaft and if I do I wanna go a different route on the jackshaft. But not sure what gears are gonna put me into the 90 mph range
To get a higher speed outa the 212 your guna need to mod the engine internally alot also tire size plays a factor into gearing aswell
@bikelifenoah577 I've done all that already. I also have an AMR300 supercharger with nitrous I'm getting ready to put on my frame
As of now I have the stock tire size, 19x7-8. Some say I need to go smaller. As of now I still have the 196 but it's slightly modified and I have a 10t front and 60t rear. But my 212 is all billet and forged internally. It has a billet rod, forged wiseco piston, stock crank, 275 dyno x cam, titanium lifters, hardened push rods from NR racing, 26 lbs springs, roller rockers, took the governor out, hardened valves, ported and polished head, amr300 supercharger, nitrous, keihin 26mm carb, aluminum intake, racing header, NGK plug, billet flywheel, and a no rev limited coil with a transparent wire which is kool lol. But it's built and almost ready to fire. I have to get more fuel line yet and another fuel pump. It quit working for some reason. But the engine is gonna have plenty of power. Just needs the right gear and the right tire size. I wanna go with a Jr dragster rear tire, but not sure what size to go with. I don't wanna go too big, but yet I don't wanna go too small either. I was also thinking about going with a 3 or 4 disk clutch if that makes a difference on anything.
@@BigDMF nice love it i wanna see that when its done
@bikelifenoah577 yes I will definitely make a video of it. And thanks 😃. I have a lot of money invested in that lol. A little more invested in that than I do my RC car I built lol. But I'll definitely make a video when it's done
Wonder what a small spool and some nitro would do mmm
Probably hurt someone ? Just guessing
This was pretty cool, but no finish line shots! I wish they would have told a little about the little motors. we drag race 300> horsepower motorcycles in the dirt! I can see some special parts on most of the bikes. Very cool and interesting. Bill BBDR DIRT DRAGS 👍👍
Guys, HERE is The Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF”
From the Ancient Egyptian Semitic:
"Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Egyptian Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
3:40 what front wheel on green bike
Let’s go! Awesome content.
What’s the distance you guys run? Time? Speeds?
Distance in this video is 330’ times we dont have sometimes we hace a speed gun
Looks like a damn blast! I have my dads ole mini from mid 60s that i man park the drag car and just do this. Looks like alot more fun honestly.
Its alot of fun and we have ppl who do both race cars and mini bikes
Guys, HERE is The Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF”
From the Ancient Egyptian Semitic:
"Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Egyptian Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
@@bikelifenoah577 just ordered all the parts for the 212 today! bascially stage 2. I recently put a 212 tilly on a bike with a rattlesnake cam, mikuni 22 and header and thats fun! Good times!
@@Praise___YaH I getchya! Im a big jesus man myself!
@@johnsmith-zd5he
jesus sir, is Lucifer.
Revelation 22:16
jesus is the “offspring of David”, jesus, The “Bright Morning STAR”, IS LUCIFER, the “son STAR of Morning/Dawn” (Isaiah 14)
jesus and the jesus story is the story of the Fallen of Genesis 6, written by “THOSE” from Israel, where the “gods/Fallen” had “sons” with the “virgin” daughters of man
Some times and speeds over what distance would have added to the video I think, good fun though by the look of it, on a par with lawnmower racing.
The fastest mini bike I saw had a old Honda C B 350 engine on it but what is a mini bike with a motorcycle engine on it ?????
Dangerous
Are they doing the ⅛ th mile or ¼ mile and how fast are they going speed and time?
This is mostly practice nd fir fun we do travel to pa fir speed nd time runs every bike is different stay tuned for new video at the nhra track
When is this next event in the nassua coliseum?
How many feet is the strip?
Some nice rips!
Are Turbos or Blowers allowed?
Any nitro bikes. Or yall haven't figured it out yet
Their are some nitro bikes but just didnt show up this day
Gotta have that Paul's kart motor up in there. I stick to flat head methanol briggs motors.
Their is a paul karts motor on a red bike
What kind of jungle music is that?
How fast are they top speed
Anywhere between 50-70 in 330 ft
Heatin the tire,thats classic.
Grown dudes in those small bikes looks funny
Yeah but it sure is exhilarating . I have several . My favorite is a 1973 golden pinto . It only runs 41 mph but it does it in 3.8 seconds . Since there is no real suspension you feel it all and it feels like you're going about 150 . It'll actually run 46 mph but that last five mph takes awhile.5.1 seconds total
Nothing funny about the technology that goes into those things the serious stuff
Can you handle one of these bikes😮
I wish you should the footage at the end to show more how fast they were going! 😢
Kinda wanted to see the electric one run. These things are pretty badass though. Looks like fun.
I believe the chain kept poping off it or he would ran it
man you guys have some sweet bikes
Thank you i love how everyone has their own touch to them
Guys, HERE is The Savior
YaH The Heavenly FATHER HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF”
From the Ancient Egyptian Semitic:
"Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3)
Ancient Egyptian Semitic Direct Translation
Yad - "Behold The Hand"
He - "Behold the Breath"
Vav - "Behold The NAIL"
Do all these channels speed up the race footage themselves or is that a you tube thing
Nothing is speed up thats raw legit footage just cut and put together
Very cool but the best way to get it shut down is to post here
Everything is legal pay to race insurance etc we good but thanks fir the concern
I built a flat track mini. Thinking about building a funny mini drag bike. By funny I mean engine behind the rear wheel.
That would be coo and very different i like it love to see it
You need drone footage.
You gotta kick your feet 👀💯
3:05 wtf is wrong with that generator
Stuff a hayabussa in it and extend the chassis😂
❤😊
Whole lotta torque converters
New York < Compton
Salute 🫡
Only mororsport that a 12 year old could beat you on your own bike!
Check my minibikes out
YOU GUYS BETTER HURRY , BECAUSE IN TAI LAND THEM GUYS IS FASTER THE YOU GUYS , EVEN THERE BOATS WITH THOSE LONG DRIVESHAFT ARE FASTER THE YOU GUYS !!!
Na we had a few guys come from out there with a fully build suzuki raider and he lost by 2 bikes
Because they use the same old gears. They haven't figured out out yet. And I have the only nitro mix. I guess they haven't figured that out yet
Those boats are insane
the music really sucks
Thanks for your imput! Everyones got thier opinions
Lose them big ugly rims in front and put a jr drag
Those motovox frames are the ugliest frames Put out
Everybody has their own opinion what mini bike do you like
They're my favorite 💯
You guys have a Facebook group or something?
Yes for longisland their is a couple i help run longisland mini bike organization
Love seeing the Mini bikes but I almost puked when I saw the one that had wheelie bars lmao
I have two that need them . I have torn up seats footpegs a kickstand and a backrest because they jump out from under you and you can either hang on as the front end comes up and fly the bike down ..... possibly rip your shoulders out of socket or break your wrists......or you can do what an old man like me does in that situation and plant your feet and let go and watch the bike tumble.....then cry when you order parts ....
The cameraman supposed to be on the other end where they coming in at not where they start at