FANTASTIC TUTORIAL I LIKE IT TOOO, SMALL DOUBT , CAN U TELL ME THE IDEAL IMAGE RESOLUTION FOR PIGMENT SCREEN PRINTING AND NON PVC SCREEN PRINTING, IF INPUT THE IMAGE RESOLUTION IS HIGH WHAT HAPPENING IN FILM OUTPUT ......... THANKS
Could I use this technique when I'm printing dark color garment laser transfers with my laser printer when I want to print a separate or second White Toner layer over the CYM ink portion in my heat transfer? Thanks!
How do I get it to save my palettes and have them actually open? I got stuck at that part because it was completely refusing to do so, and the CMYK paletted looked bad. With my process though I can do six colors at once pretty easily.
hi there i saved my set pallet color to index the image , but when i try to convert the image to the 8 bit pallet color ..it doesnt appears ... so i looked for it and it doesnt show neither... hope you can helpe me,,, thanks to share dude by the way
When can you enlarge the image if needed? I noticed your output size was say 9 x8.75. Is there a point in the process that I can enlarge it without affecting the index size?
Well I would set my image size and resolution before beginning the separation process.. The seps usually turns out better when the image is optimized beforehand..
I'll have to watch it again, but I thought Tom said if you enlarge it the index squares would not be the correct size. So you would enlarge before you resample to 150 dpi because if you do it after it will not be 150 dpi.
Buen tutorial, pero no explicaste como guardarlo para luego imprimirlo y me urge aprenderlo.... gracias te sugiero un nuevo tutorial donde lo expliques por favor.
replicating the same processes by pasting the tiger from u tutorial as the subject image, pulling out the specific color, eg, orange, is not as clean as yours, pls supplement what is missing? tks a lot..
👏👏👏👏👏👏عالی هستید
Thank you very much very nice video. A greeting to you from Morocco
Man...this tut is PURE GOLD...!!!
MAN!! JUST WONDERFUL!! THANKS A LOT!! you just saved me years!!!!!
You are a GENIUS!!!
This was a very informative video. Thanks
Very interesting and useful tutorial, thank you
Great Video... Thanks for the knowledge.
Great information, However I have a question, How do I do this if that image is going on a Black Shirt???
this is great.. thank for sharing
FANTASTIC TUTORIAL I LIKE IT TOOO, SMALL DOUBT , CAN U TELL ME THE IDEAL IMAGE RESOLUTION FOR PIGMENT SCREEN PRINTING AND NON PVC SCREEN PRINTING, IF INPUT THE IMAGE RESOLUTION IS HIGH WHAT HAPPENING IN FILM OUTPUT .........
THANKS
Could I use this technique when I'm printing dark color garment laser transfers with my laser printer when I want to print a separate or second White Toner layer over the CYM ink portion in my heat transfer? Thanks!
How do I get it to save my palettes and have them actually open? I got stuck at that part because it was completely refusing to do so, and the CMYK paletted looked bad. With my process though I can do six colors at once pretty easily.
nice nice nice thanks
Do you have a tutorial about indexing colors in Photoshop? Thanks for your help
thanks for the video one question what hapens if the shirt is color black thanks.
Which mesh screen should be used for Plastisol Inks under 150 dpi
Can you use the eye dropper to pull two/three/four colors from the image?
hi there i saved my set pallet color to index the image , but when i try to convert the image to the 8 bit pallet color ..it doesnt appears ... so i looked for it and it doesnt show neither... hope you can helpe me,,, thanks to share dude by the way
Whenever i try to follow theses steps. There's a notification that THIS DOES NOT APPLY ON A SOFTMASK etc....kindly help. THanks
When can you enlarge the image if needed? I noticed your output size was say
9 x8.75. Is there a point in the process that I can enlarge it without affecting the index size?
Well I would set my image size and resolution before beginning the separation process.. The seps usually turns out better when the image is optimized beforehand..
I'll have to watch it again, but I thought Tom said if you enlarge it the index squares would not be the correct size. So you would enlarge before you resample to 150 dpi because if you do it after it will not be 150 dpi.
you have another video with this same process . I became interested . I'm from Brazil.
+A th-cam.com/video/pDgZI8RiKUo/w-d-xo.html
Corel x4 does not have seps.xml option in palette choices. Another option?
+Sarah Pick you have to create the palette folder and name it to place your index colors. Should be able to work with X4
Buen tutorial, pero no explicaste como guardarlo para luego imprimirlo y me urge aprenderlo.... gracias te sugiero un nuevo tutorial donde lo expliques por favor.
could I make my colors pantone?
replicating the same processes by pasting the tiger from u tutorial as the subject image, pulling out the specific color, eg, orange, is not as clean as yours, pls supplement what is missing? tks a lot..
how do you get the white on index sep??
i tried doing it like your video on the other colors and white just comes up with it being blank.
Since when did CorelDraw become a software you have to pay for ?
traducelo ppleace