Thank YOU, Sir... I Have a 2015 International 4300 and Had The Same Display!! Your Step By Step Process, CLEARED The Service Light and Reset The Codes...AWESOME!!
Thanks a lot! I just got a regular PM & transmission PM for my inspection, and the mechanic that did it told me in order to clear the message, I had to drive a few miles & it would reset itself. SMH. Thanks again! 👍😀
Thx U .very much i always have this problem with my IC school bus. I play around with the cruise control and i got the Noisy buzzer off. So GREAT JOB.👍
I have 2016 prostar and sometimes it comes on is a automatic transmission and it will stop in a gear and an F will blink with the gear it was on just wanted to know what’s wrong with it
Thank you for your information but my question is why does it keeps happening my truck does it at least 3 to 4 times in a week or so. Any info will be gladly appreciate. Already subscribed.
International ProStar’s have a lot of recalls on the transmissions and clutches for the Eaton fuller automatic transmission I would call your local International dealership.
Mine does the same thing but I cannot get it to remove it won’t switch gears when light is on nor go more then 15mph I cleaned out my dpf and added new sensors to it light came off but came back on and did not run .. I was told maybe it could be a sensor in transmission.. what’s your opinion I have a 2012 international Maxforce durastar 4300 with Allison transmission.
I just had some 2003 fmi 31 pop up. Also truck would not move. Said range inhibited with yellow triangle illuminated. Shut truck off a few times checked codes then it moved with no yellow triangle or check trans. Just added trans fluid Friday due to leak at trans cooler fittings. Got it back home and told driver to go home. This something I should be worried about? Does it always not allow truck to move when this code comes on? Also yellow light, check trans, and 2003 fmi32 keeps coming back. But can still shift and move truck
My steering wheel cruise control buttons are different. I have the on/off button, set coast and resume/accel on the left hand side of the steering wheel. Could I still do it?
Any y'all know how to fix one of these trucks that run with a dead throttle?? Replaced the throttle sensors and throttle 2day and it runs great just no pedal in any gear??
I have the same truck with triangle showing but my code says ESC module* can you help or give any info on the issue. Had it scanned no codes came up runs drive fine.
On your steering on the left side push Resume button on the right side of the steering wheel push button down do both at the sometime.This will show fault codes in your dash.
I have a 2009 prostar started having issues with trans replaced trans with a manual transmission now engine sweated and throwing electrical faults on dash how do I take these codes off
I have an international prostar 2016 ixcummins and on my dash Gen trans flt came on now my dash I can’t see my mileage Could I use this procedure to rest or to see my dash again please help me
Hey anyone tells me I have 2018 prostar automatic transmission every time I put the truck in reverse and I gently push the gas pedal the truck moving slowly and suddenly jumps back harder like you push the gas pedal to the metal any answer?
@@bigrigfix I'm sorry I got you confused with the international dealerships chanel. But anyways, see if you can help me with my ac. I got a 2010 international prostar My ac suddenly stops blowing cold air. I put freon,did the airvac,change thermistor, no luck. I got a electrical faulty warning. Can you help me please. I'm disabled with asma and I really need my ac. And at the truck stop with no ac ,all I got is diesel fumes.
@@bigrigfix I will try that tomorrow morning. Today I turn a little bit the steel knob,that is on the line,also I hit it a couple of times and spray wd40 In the compresor. But I believe my compressor is working. I'm just trying anything. Thanks for your response!!! I really appreciate it. Blessings to you for your kindness towards me.
2015 international prostar no TCM communication. bought a new tcm .. didn't fix the issue now tech wants to replace chassis harness that connects ecm , bcm , tcm .. dealer said 5-6 weeks to make and cost $6500 would be nice if the he was sure of the issue. Help 5 weeks truck down # dealer 2511803C91
I never commented on anyone’s page , but it starts here, thanks Bud .
Thanks for watching.
I really appreciate your help after I did all what's on the video now my miles not show on dashboard
Thanks for watching.
Should we put the parking brake on while doing this procedure?
Real life saver man!! You’re highly appreciated from so many! Thank you.
Agent 007 Thanks for watching.
2017 international prostar, worked like a charm
Thanks for watching any video Ideas that will help let me know.
You really just saved me from a break down call. So grateful
It just did it again smh
Thanks for watching please like subscribe.
Life saver! Literally pulled over and did this and it worked!
So cool! 1st set of instructions worked for me. Ty so much for uploading this video!
Thanks for watching .
Thank YOU, Sir... I Have a 2015 International 4300 and Had The Same Display!! Your Step By Step Process, CLEARED The Service Light and Reset The Codes...AWESOME!!
Bro you are amazing.
Thank you. God bless. All you desire will come abundantly
Thanks a lot! I just got a regular PM & transmission PM for my inspection, and the mechanic that did it told me in order to clear the message, I had to drive a few miles & it would reset itself. SMH. Thanks again! 👍😀
Same here.
Thank you, I followed you the first time you showed it and it worked with no problem! This was done after I changed my transmission filter.
Is that hard to do? I need to change mine
I have to watch again the video.
Thx U .very much i always have this problem with my IC school bus. I play around with the cruise control and i got the Noisy buzzer off. So GREAT JOB.👍
I have 2016 prostar and sometimes it comes on is a automatic transmission and it will stop in a gear and an F will blink with the gear it was on just wanted to know what’s wrong with it
Thank you! been trying the first 2 sequences on my 2016 Peterbilt 337 Allison 2200RDS erased all with D N R N D N R N D N R N !!!!!!!!!
Thank you for your information but my question is why does it keeps happening my truck does it at least 3 to 4 times in a week or so.
Any info will be gladly appreciate. Already subscribed.
Worked like a charm! Thanks for the video!
What’s the reason for the reset if it’s a fault code ? Guess I missed the point can you explain?
Would that work for a stick shift?
This works! Thanks for posting! Appreciate you!!
There is a mark at transmission gear control like screwdriver ?
My truck is only displaying trip miles. Any way to get back to my traveling miles? Got any advice
It worked!! thank you!!
Thanks brother I have learned much . I'm driving a V8 Detroit diesel with same problems and I can't clear code DO NOT SHIFT. Can you helpe me??
This video just saved my azz ! Thanks, man!
Thanls for the video ✌️
Hi, there have something similar on a 2016 pro star: has a blinking F, N and “Gen Trans Flt”. Any help would much appreciated!
Let me look into that.
Ever find any answers for this mi es doing the same?
International ProStar’s have a lot of recalls on the transmissions and clutches for the Eaton fuller automatic transmission I would call your local International dealership.
@@bigrigfix thanks brotha… I’ll check that out and will reply back and see what they say🙏🏼
@@TheMoneyCHRIS let us know what they tell you too! Lol
👌👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
I tried as you said and it was good.
thank you so much.
I have the triangle engine and def to the left they keep coming on. Does this work for those please help thanks
Thanks 🙌
Thanks for watching
Thank you 👍
Mine does the same thing but I cannot get it to remove it won’t switch gears when light is on nor go more then 15mph I cleaned out my dpf and added new sensors to it light came off but came back on and did not run .. I was told maybe it could be a sensor in transmission.. what’s your opinion I have a 2012 international Maxforce durastar 4300 with Allison transmission.
Questions dose this have ob2
This worked
2017 Pro Star
Thanks
I just had some 2003 fmi 31 pop up. Also truck would not move. Said range inhibited with yellow triangle illuminated. Shut truck off a few times checked codes then it moved with no yellow triangle or check trans. Just added trans fluid Friday due to leak at trans cooler fittings. Got it back home and told driver to go home. This something I should be worried about? Does it always not allow truck to move when this code comes on? Also yellow light, check trans, and 2003 fmi32 keeps coming back. But can still shift and move truck
Yeah that’s Triangle death you probably have If it’s automatic transmission internationals have a lot of recalls . My need to bring to dealer.
Thank you for this!
Thanks for watching.
No one seems to give one info that I need after resetting - Can I drive now ??? Or do I still need to change the oil filter ??
Mine comes on for a few seconds and then transmission kicks in. Goes on and off. Mainly when I am at a stop. And then to take off
You are awesome thank you so much
I did what's in the video and it really work
Awesome thanks!
Thanks it worked for me
Is same on the 13 gear ? 😢
What about manual internationals
En un estadard como le hago los mismos códigos me marca
Hola buenas tardes como borrar el check
My steering wheel cruise control buttons are different. I have the on/off button, set coast and resume/accel on the left hand side of the steering wheel. Could I still do it?
Sorry I’m not sure.
Mine has the triangle but it says trans oil filter, what does it mean?
Any y'all know how to fix one of these trucks that run with a dead throttle?? Replaced the throttle sensors and throttle 2day and it runs great just no pedal in any gear??
I have the same truck with triangle showing but my code says ESC module* can you help or give any info on the issue. Had it scanned no codes came up runs drive fine.
On your steering on the left side push Resume button on the right side of the steering wheel push button down do both at the sometime.This will show fault codes in your dash.
But need replace filter if you dont replace don't work
Thank you man ,it works 👌👌
Is this an indication of a bigger problem?
Just resetting the trans oil filter Service intervals hours Notifications.
U da man bro
Thanks for watching.
Thanks
Thanks for watching.
Thanks bro I’m a subscriber thanks for the knowledge
I have a 2009 prostar started having issues with trans replaced trans with a manual transmission now engine sweated and throwing electrical faults on dash how do I take these codes off
Man bro you just helped me out so fucking much 🙏🙏🙏
Nice bro
Thank you for watching.
This didn't work for me
I have an international prostar 2016 ixcummins and on my dash Gen trans flt came on now my dash I can’t see my mileage
Could I use this procedure to rest or to see my dash again please help me
Did u ever fix ? & how mine does same thing
Do you know how to read the active and non-active codes? Like what they stand for.
@@YeeeeeHaaaaa Relax. It's just question. Information is meant to be shared.
Have the same truck , dash light is stuck in drive
It clears it but it comes back on :/ 597 is my cose
What is RN 421 code mean on an international truck? Can anyone please help me out? Thanks and appreciated.
what engine is the durastar, maxxforce or cummins
Cummins
❤جميل
❤good
U saved me thanks..
Hey anyone tells me I have 2018 prostar automatic transmission every time I put the truck in reverse and I gently push the gas pedal the truck moving slowly and suddenly jumps back harder like you push the gas pedal to the metal any answer?
Did you fix the problem?
Lo pueden decir en español
Can't see your hands. So I don't know what exactly...
MY TRUCK SAYS ELETRICALLY FAULT
NY Galore
My truck too , it’s says electrically fault ,
What should I do any ideas?
My truck too guys .
@alexsanantony did you ever figure out the problem. Mines says electrical fault as well
Alternator
My truck is manual
Didnt work
Does anyone answer this question?
What question.
@@bigrigfix
I'm sorry I got you confused with the international dealerships chanel.
But anyways, see if you can help me with my ac.
I got a 2010 international prostar
My ac suddenly stops blowing cold air.
I put freon,did the airvac,change thermistor, no luck.
I got a electrical faulty warning.
Can you help me please.
I'm disabled with asma and I really need my ac. And at the truck stop with no ac ,all I got is diesel fumes.
My need to clear faults in the dash.
And Cycle the key three times.
@@bigrigfix
I will try that tomorrow morning.
Today I turn a little bit the steel knob,that is on the line,also I hit it a couple of times and spray wd40
In the compresor.
But I believe my compressor is working. I'm just trying anything.
Thanks for your response!!!
I really appreciate it.
Blessings to you for your kindness towards me.
I think I mite be doing it to fast 🤦🏽♂️
Wow it actually worked 1st try lol, e o, k o...
i subscribe you thankyou
Didn’t work 🤷🏾♂️
The truck not strat
This vid is so confusing tried this five times zero fix. Terrible
Sorry couldn’t help.
2015 international prostar no TCM communication. bought a new tcm .. didn't fix the issue now tech wants to replace chassis harness that connects ecm , bcm , tcm .. dealer said 5-6 weeks to make and cost $6500 would be nice if the he was sure of the issue. Help 5 weeks truck down # dealer 2511803C91
Hello, you were able to solve the problem. I'm in the same situation.
Questions dose this have ob2