HERE ARE MY TOP 10 TOOL PICS !!! Wilton Sledge Hammer: goo.gl/rjZr8H Side Cutters: goo.gl/GhhxGM Chalk Box: goo.gl/qMs4Y6 Putty Knife Scraper: goo.gl/JHQHkc Klein 11 in 1 Screwdriver: goo.gl/onHoFp Electric Jig Saw: goo.gl/52jpth Vice Grip: goo.gl/YVg9Z5 Drill Bit Set: goo.gl/cb1fvZ Crescent Wrench: goo.gl/3uSZzY Pliers: goo.gl/QQeFer Total cost of all ten tools $300.66 These tools are Amazon affiliate links, thank you.
Cody I would only change one of those tools and that is, I would get a painters 5 in 1 tool instead of a putty knife. You can do every thing a putty knife can plus a lot more. I would also say the jig saw should be variable speed and also have an oscillating cut option.
Plus one. Also. For the screw driver. I have used a Klein 10-1 for 10 years as my main go to. Great tool for the price. So if budget allows. It's worth it
Russel Brown. Good choice, I've probably performed at least 20 different tasks with my 5 in 1 painters tools. I carefully sharpened the long side to make it even more useful.
When I was a kid, working in an upholstery shop, one of my jobs was to remove the existing fabric from the frame of chairs, sofas, etc. The most indispensable tool to use for removing upholstery staples was a pair of side cutters. Gently grab the head of the staple and roll the side cutter on its side and the staple pulls right out, smoothly and almost effortlessly. I've never forgotten that tool and the usefulness for a job that it arguably was not designed for. Steve
I've recently pulled out an inch long nail out of the wooden plank with those. "Well, they're kinda like a crowbar" - i thought, then **crack** job's done :)
This really is so helpful to me. I have been planning on getting a new set of drill bits but wasn't really sure how many or what sizes. Now I know what would make good sense for my situation. Thanks Cody!
Great concept for a series! I think all the choices so far are great. Maybe a painters 5 in 1 scraper instead of a putty knife. I could see a need for both. Thanks as always for the great content!
I was a young man walking with my father and we were tool shopping. We were almost to the power tool section and we were talking about brands. I called the Porter Cable brand the Porter Wagner and he started to laugh hard. I pulled a Norm Crosby bit without thinking. He died years ago and it's silly, but it is one of my fond memories of my father. We always had good laughs together.
1-Screwdriver-straight 2-Screwdriver-phillips or adjustable 3-Sledgehammer 4-Hammer 20oz 5-Pliers=regular 6-dykes=sidecutters 7-visegrips-medium & needle nose 8-Large Jaw adjustable pliers aka Channellock 9-3/8 Socket Set with Ratchet std - metric 10-Sawzall or Jab Saw 11-Scraper-putty knife 12-chisel set 3 .25-.50-.75 13-C-Clamps 14-Square - 16x24 15-Jig Saw 16-Drill- cordless 17-Drill bits many styles 18-allen wrench set 19-Flashlight 20-Crescent wrench medium 21-File set for metal 22-Needlenose pliers 23-Prybar flat style 24-Metal Snips 25-Tape Measure 26-Torx Bit set 27-Awl or center punch- nail set 28-allen wrench set 29-Knife- utility 30-Sharpening stone 31-Pencil 32-Pen 33-Magnifying Lens 34-WD40 35-Tool Belt 36-Hatchet 37-Vise 38-Box end-Open end Wrench Set 39-Scissors 40-Ruler-Straightedge 41-Hack Saw 42-Cats Paw nail puller 43-Level 44-Framing Square small 45-Propane Torch 46-Chalk line 47-Voltmeter 48-Angle grinder with wheels 49-Shovel 50-Brushes - Misc types
To be honest, An average day joe could easily have 50 tools and be happy with it, A lot do. 1. Hammer 2. Drill 3. Screw driver set 4. Hex head set 5. Chainsaw depending on the place you live 6. Chains if they count 7. Crow bar 8. Vise 9. Miter saw 10. Flashlight 11. Glock 12. Sledge hammer 13. Welder 14. Soldering iron 15. duct tape 16. Pliers 17. File set 18. Wire cutters 19. Wire strippers 20. Razer blade 21. Level 22. Pencil 23. Tape measure 24. stud finder 25. Pudy knfie 26. Vehicle of some sort 27. Jig saw 28. Vise grips And that's about all I can think of right now. Those will cover pretty much any around the house job you have.
I like them alot too, but the sleeve that holds 1/4 in bits didn't hold up well as an extension when chucked up in a drill. I would like the slotted bit to be separate from the philips bit, having them mixed is often frustrating.
Putty knives are also a wonderful smooth steel slide. lifting/setting sliding glass doors, moving industrial tools or engine components or stone blocks, your tool kit has a perfect smooth surface to slide on that will hold a surprising amount of weight. Oh, and take a workshop on how to putty with them, or watch some youtube videos and practice. Wooden frame glazing, door & window trim, not to mention other materials that are worked in a putty like state like epoxy putty, gummy sealants, patching plaster, caulking walls or boats, working auto body filler.The skills are very transferable.
My first tool, I was born with... Second is my 1911A1 .45 ACP.. Third is a Buck 110 Folder.. Fourth is a Hammer Hatchet . Fiffth is my Truck.. Sixth is a medium set of vice grips pliers. Seventh is a hand saw that was Father's and Grandfather's.. Eigth is my FN49 rifle that was my Fathers.. Ninth is a medium Crescent Wrench. Tenth is a Leatherman Surge multi tool...
A 5' crowbar, clawhammer, boltcutters, phase tester, handsaw , shovel and spade, lump hammer, plane, spokeshave, a good tool box, calking gun, a funnel, just some others I use all the time 😊
I have been waiting for this video. My father is no longer with us and in the time we had together we never discussed what makes up an essential tool kit. Thank you very much Cody.
Funny..I could talk about this stuff all day. You got me with the chalk box, I wouldn't have thought of that one, even though mine is older than I am and I've used it on nearly every large project I've worked on. I might differ in some specifics, a 10 or 12 inch crescent would be my preference, and I have switched to the Klein long reach 6 in 1 screwdriver (the longer shanks I have found more useful). Of course, you could ask 20 men and get 20 different responses. Thanks for the interesting vid, looking forward to the rest!
I’ve found that a high quality heavy duty all steel scissors will cut everything from paper to thicker plastic even thin sheet metal they are very versatile.
What a Great set of videos. Of course, I am patting You on the back, having not seen the rest. But, I love the quality of this subject. And, and, You bring not only Your experience, but have inculcated all the experience from Your family history. My Bride and I are traveling to California to celebrate a Grand Niece's recent wedding. We will include these 10 tools in a box as a gift. I will also include lists from future videos as You present them.
You may mention channel lock pliers in a future video, but if you haven't tried the knipex brand cobra channel lock pliers get a pair. Game changer for sure. I haven't found a better gripping pair of pliers yet. If I had to limit a tool kit for weight or some other reason those could take the place of vise grips, regular pliers, and even pipe wrenches. I've used them to remove oil filters, fit pipe, and even used them to remove a stuck spindle nut when I didn't have the proper socket available. I was able to put my hands under the fender and push on the pliers with my foot. Since they self lock once there is tension on them you don't need to squeeze the handles to maintain grip.
What my grandpa did and my dad did which I’m doing now is besides your essential tools they would buy tools as they needed them for projects or working on cars. Buying tools little at at time for decades and now my dad has a garage full of every tool you could ever imagine. You don’t need every tool right away. It takes a lifetime to collect tools.
I'm a tool guy and don't own a large pair of side cuts. I have a small pair for electrical work and a specialized flush cut version for trimming pin nails in trim. I think linesman pliers are more versatile and except for really tight places give most of the functionality of sidecuts. A huge improvement over pliers are the Knipex cobra series, with the 10" my go to tool. The features are far superior to regular pliers and channel locks, but aren't apparent until you use them. The most important is that the geometry doesn't fight you. The harder you twist the harder they bite. Your hand isn't forced open by the torque. They are thin and very strong. Fine teeth. One hand push button adjustment. Parallel jaws with recesses for a firm bite on hexes. My favorite pliers. You won't be disappointed. .
My top ten would be. 1. My pocket knife, super useful, can’t do without. 2. My welder. 3. My grinder, for shaping metal. 4. My sharpening kit. 5. Speed square. 6. My hatchet. 7. My folding saw. 8. My truck, need that. 9. My drafting tools for making blueprints. 10. My cell phone, use it every day, need it for work. With my welding gear I can make most of the other tools I could need, to exclude screw divers and such. If I was told I could only have 10 tools and never make or trade for more, the list would be different.
one quick thing I want to note is that when it comes to jigsaws corded is nice because you don't have to worry the battery not being fully charged,however that's literally the only benefit vs cordless,if you take into consideration that with a cordless jigsaw you can use it both indoors and outdoors because you don't have to worry about plugging it and you don't have worry about tripping over the cord and you don't have to worry about how long f an extension cord to reach your work area unless you have a receptacle nearby,however the problem with cordless is that some brands aren't very precise with their cutting so I can totally relate to why you use corded,another downside to cordless is that they're always more expensive than corded regardless of what brand you want,but those are just my opinion's on my own personal experience with jigsaws and I thought I'd share.
WOW....WRANGLE STAR!!!!!...love this vid....great idea...as soon as i saw the title i got mad,,,serious...cause i use tools everyday,,,,and was waiting what to see.....after watching i agree 100%
Vice Grips aren't as good as they used to be and they are no longer made in the USA. Now when I look for locking pliers, I like the Milwaukees over modern Vice Grips though neither are bad. If I can spend more, Grip on and Proto make great locking pliers. If I remember correctly Snap On rebrands Grip On's locking pliers.
For screwdrivers I think that the best multi screwdriver is the Klein 11 in 1. You get 8 screwdrivers 3 nut drivers. And a lifetime warranty with the quality of Klein tools
Klein makes a tool that is the 4 in 1 screwdriver, but also includes the bits for punching down phone and ethernet cable. For the work I do (telecom), that's an insanely valuable tool.
Wow. You are so spot on about the chalk line and can lights. You're the man. Lol. Also, you're not afraid of your faith. I love it. We share a lot of views. Your channel is awesome. Thank you for what you do
Cody as your tongue tried to do 😀 I would include a 10 pound or so maul not a sledgehammer. Also for use on church mission trip projects I built a table for my jig saw, make it kind of like a band saw. It clamps to the tail board of my pickup.
My brother is a straight A student at a top university and he can't figure out how to use a screwdriver. Anyways, for someone just starting out with tools, get a nice solid tool chest and be ORGANIZED. Get a sturdy workbench with a nice Taiwanese made vise. No need to buy top quality tools at first, but NEVER buy cheap junk like Black and Decker. Mid-grade tools are good for someone getting into DIY projects as a hobby. For power tools, cheapish brands like Skil or Ryobi are fine for household use, but always get good quality accessories. Also do not buy cordless tools unless you absolutely need the portability.
Only disagree with the size of the Crescent. I'd go with a 10". To each their own, definitely enjoy watching and getting your insight and reinforcement of my knowledge of tools.
Glad to see how many of these I already have!! This series will be very helpful, though, in building a good set for my son. Looking forward to the rest of the series. Have a Happy Thanksgiving, Wranglerstar Family!!
Well thought out. I have most items, but missing a few. Chalk Box is now on my list. BTW Cody I highly Reccomended taking notes/ To Do lists utilizing “ FIELD NOTES” inspired by the vanishing sub genre of agriculture memo books, ornate pocket ledgers. Subscription based. Old School, but yet so 😎.. Made In the 🇺🇸... An honest memo book worth fillin’up with GOOD INFORMATION. As always. Great list.... Looking forward to part #2
Would like to see a video entitled "Surprisingly useful totally um-necessary tools". A few examples from my list include: Jaw horse, Edge clamps, double-sided tape (to cut multiple pieces at one time), spring-loaded punch, elongated marker, etc.
Hi Cody, I have been getting rid of all my coded tools, I was fed up with every time I wanted something the cord would be tangled with all sorts of other tools, so I bit the bullet and cut off all the cords. I bought twenty good quality three pin connectors and put the mail connection onto all my tools. I then bought a fifty-foot reel of good quality flexible three cord wire and made several extensions ten feet, fifteen feet, and twenty-five feet extension and I have never looked back, I got the idea from Festool and it is so much easier to keep tools that do not have long cords on them and I use less room storing them as well.
I have Craftsman locking pliers, and they are great! They have a longer piece of metal that sticks out past the handles, so getting them open is much easier.
The tools I always have on my belt are: Klein 11 in 1 screwdriver, Leatherman Wave with the bit kit, side cutter, 18-10 awg wire strippers, a panel screw driver(insulated), a terminal screwdriver(insulated), folding utility knife, a straight blade folding knife, 8” crescent, small slip groove interlocking plyers, and a pouch containing a set of hone stones. I use these tools on a daily basis and that covers a huge variety of situations.
Great set of tools. For the screwdriver I’d choose a Klein 11-1, has Phillips, flat, torx, and square drives. I’d also get an adjustable spud wrench, can use it as a punch, align holes, and a pry bar if need be. Keep up the good work and stay safe
My Granddad put a basement in his house the same way. When I was a young teen, my dad, uncle, and I helped him finish digging out the last part, and poured a slab floor. Your story reminded me of that. I remember him handling his miner's pick with casual familiarity, as much as he was able to work by then. I suspect my uncle still has Grandad's pick, I should call him. I know no one else in the family would have interest in it. I also detest plastic handles, but my "truck" shovel that rides year round in the back of my truck has one. I live near Astoria, it rains here, if you hadn't heard, lol.
I live the klein 10n1. I just Vise Grips alot. mainly for holding shocks for that bolt that always strips or breaks off lol. needle nose vise grips for hose clamp pliers
I'm a Ryobi fan but I also am a new homeowner not a contractor. I've used a Makita drill and it definitely has more torque than Ryobi and is built beefier but for my purpose I can make my budget go a lot further buying Ryobi and they work just fine. Zero issues thus far and I know others who agree that have used other types of tools. Definitely on most things corded go with the better quality, it's not going to be that much more expensive. On cordless I'm going to stick with Ryobi for awhile.
Best screw driver is the Canadian classic "Picquic." They come as SEA or MM hex as well as torx too. I keep all 4 in the tool bag encase I have someone working with me or I want to work more productively.
U forgot 1 thing.... The Knipex 12'' 88 01 300 Alligator pliers. These i have with me 24/7. Here in the Netherlands we call them 'waterpomptang' wich means water pump pliers. Every man has one in his toolkit, cheap brand or the best like the Knipex.
I am taking notes of what I should purchase :) As many as I do have already.... I miss vicegrip, not mentioning I havent purchase a good jigsaw yet. It is time to have a shop run!
The crescent wrench here in Australia we call that a shifter not to be confused with the one you use to change gears in your car. Out of all the tools that is the only one we call it different.
You could never go wrong with Vice Grips. The originals were made here in Nebraska in Dewitt, will be stamped on the side of the vice grip. There were made here and the name had also changed to American Tool, until they shut the plant down and moved production to China in 2008. Something like 330 people lost their jobs and really hurt the town of Dewitt, then eventually was bought out by Malco. Still very good tool, most now have wire cutters built into them and there are different models from Vice Grip C clamps and even chain strap wrenches.
Looking at it today I would urgently advice to replace crescent wrench with one Knipex pliers wrench - opens wider with smaller size, does all the same more convenient and more. I ditched about 3 kilograms of wrenches for just one Knipex pliers wrench in my work toolbox.
Totally agree and I'm glad to see someone said something about this tool, because I was going to. I have 3 sizes and made sure my family has them as well. I'll never use/buy a crescent wrench again.
HERE ARE MY TOP 10 TOOL PICS !!!
Wilton Sledge Hammer: goo.gl/rjZr8H
Side Cutters: goo.gl/GhhxGM
Chalk Box: goo.gl/qMs4Y6
Putty Knife Scraper: goo.gl/JHQHkc
Klein 11 in 1 Screwdriver: goo.gl/onHoFp
Electric Jig Saw: goo.gl/52jpth
Vice Grip: goo.gl/YVg9Z5
Drill Bit Set: goo.gl/cb1fvZ
Crescent Wrench: goo.gl/3uSZzY
Pliers: goo.gl/QQeFer
Total cost of all ten tools $300.66
These tools are Amazon affiliate links, thank you.
Wranglerstar Love your vids ma dude keep going forward
Are you not considering everyday items, such as forks, spoons, etc as tools?
Wranglerstar you always talk about your grandad how comes you never talk about your dad?
Wranglerstar
There's one tool missing from your 50 . . . *this* *channel!*
im very happy this title doesnt say "50 tools *a man* needs" to survive life"
You'll know you have a good quality set when everyone wants to borrow them.
1.Extension Ladder
2.Wheelbarrow
3.Bucket
4.Rope
5.Clamp
6.Spirit Level
7.Square
8.Trestles&Planks
9.Knife.
10.Screwdrivers
11.Hacksaw
12.Woodsaw
13.Bowsaw
14.Fretsaw
14.Hatchet
15.Axe
16.Shovel
17.Pick
18.Heavy Bar
19.Sledgehammer
20.Lumphammer
21.Clawhammer
22.Prybar
23.Mattock
24.Pliers
25.Vise-grip
26.Adjustable Spanner
27.Pulley
28.Chainfall
29.Blowtorch
30.Bench Vise
31.Workbench.
32.Ratchet Straps
33.Files
34.Toolbelt
35.Tape Measure
36.Drillbits
37.Drill
38.Chisels
39.Wooden Mallet
40.Tube Sealant Applicator
41.Paintbrushes
42.Scraper/Spreader
43.Bricklayer's Trowel
44.Four-tine Hayfork
45.Rake
46.Stepladder
47.Chalkline
48.String Level
49.Machete/Billhook
50.Flat Spade
Thanks for this info
As an electrician I may be a little biased, but a pair of linesman pliers are an absolute must.
linemans and 440 channellocks they are good for electrical work and plumbing those slip joint pliers useless
Klien lineman pliars and dykes channel lock brand 440 adjustible pliars are as good as it gets in my opinion
Cody I would only change one of those tools and that is, I would get a painters 5 in 1 tool instead of a putty knife. You can do every thing a putty knife can plus a lot more. I would also say the jig saw should be variable speed and also have an oscillating cut option.
Russel Brown I agree
Russel Brown I agree I love my painters putty knife. It has come in handy for multiple projects for me
Plus one. Also. For the screw driver. I have used a Klein 10-1 for 10 years as my main go to. Great tool for the price. So if budget allows. It's worth it
Russel Brown. Good choice, I've probably performed at least 20 different tasks with my 5 in 1 painters tools. I carefully sharpened the long side to make it even more useful.
Josh, is your keyboard broken or do you have a different reason for using periods instead of commas?
Who is he kidding? His first 10 would all be axes.
XGC Scrappy a file not a stone haha I see him talk about files a lot
I was thinking a plane, even though it makes little sense.
Tim Elmore haha yup. As well as my first 10 xD
When I was a kid, working in an upholstery shop, one of my jobs was to remove the existing fabric from the frame of chairs, sofas, etc. The most indispensable tool to use for removing upholstery staples was a pair of side cutters. Gently grab the head of the staple and roll the side cutter on its side and the staple pulls right out, smoothly and almost effortlessly. I've never forgotten that tool and the usefulness for a job that it arguably was not designed for.
Steve
stuff I used to work in an upholstery shop myself. You're right, I've pulled many a staple that way also.
I've recently pulled out an inch long nail out of the wooden plank with those. "Well, they're kinda like a crowbar" - i thought, then **crack** job's done :)
stuff i
1. Chanellock 10” tongue and groove pliers
2. S-K 8” adjustable wrench
3. Klein 9” lineman’s pliers
4. Klein 5” needle nose pliers
5. Klein screwdriver set
6. Fluke 117 multimeter
7. Snap-On FX-80 3/8” drive locking flex head ratchet
8. S-K 6 point, 3/8” drive socket set, metric and SAE
9. Snap-On male torx bit sockets
10. Snap-On female torx sockets
11. various adapters, universal joints and extensions for socket set
12. Snap-On hex bit sockets
13. Milwaukee cordless sawzall
14. Milwaukee cordless drill
15. Milwaukee 3/8” impact wrench
16. Milwaukee flashlight
17. Milwaukee cordless cut off tool/grinder
18. Milwaukee cordless miter saw
19. Estwing 28 oz. straight claw hammer
20. Wilton 2.5 lb. ball peen hammer
21. Snap-On 24 oz. dead blow hammer
22. Werner 6 foot fiberglass ladder
23. Werner 32 foot fiberglass extension ladder
24. Daytona 3 ton floor jack
25. Mac Tools hooks, picks and scrapers set
26. Irwin 10” vise-grips
28. Irwin 8” needle nose vise-grips
29. Klein wire strippers/crimpers
30. Rigid table saw
31. Milwaukee cordless circular saw
32. Bosch table router
33. Rigid wet tile saw
34. Square notch trowel
35. Putty and drywall taping knives
36. Sanding blocks
37. Drywall hand sander
38. S-K X-Frame ratcheting combination wrench set, metric
39. Snap-On flare nut wrench set
40. Snap-On Verus Pro
41. Mayhew Prybar set
42. Rigid basin wrench
43. Rigid tubing cutters
44. Empire 1 foot level
45. Stanley Fatmax utility knife
46. Stanley Fatmax tape measure
47. Drill bit sets
48. Plunger
49. Paintbrushes and rollers
50. A million clamps
great video
This really is so helpful to me. I have been planning on getting a new set of drill bits but wasn't really sure how many or what sizes. Now I know what would make good sense for my situation. Thanks Cody!
Dudes gonna make an absolute killing on the affiliate links in these videos, especially with black friday deals.Tactical.
I’m enjoying these videos to grow my education with tools. This is quite the series to start to rack in the amazon affiliate revenue as well!
We need a 6 year update!
Great concept for a series! I think all the choices so far are great. Maybe a painters 5 in 1 scraper instead of a putty knife. I could see a need for both. Thanks as always for the great content!
I have one of those screwdrivers but it is 5/16 nut driver on one side and 1/4 nut driver on the other side. Works great I agree completely
I was a young man walking with my father and we were tool shopping. We were almost to the power tool section and we were talking about brands. I called the Porter Cable brand the Porter Wagner and he started to laugh hard. I pulled a Norm Crosby bit without thinking. He died years ago and it's silly, but it is one of my fond memories of my father. We always had good laughs together.
1-Screwdriver-straight
2-Screwdriver-phillips or adjustable
3-Sledgehammer
4-Hammer 20oz
5-Pliers=regular
6-dykes=sidecutters
7-visegrips-medium & needle nose
8-Large Jaw adjustable pliers aka Channellock
9-3/8 Socket Set with Ratchet std - metric
10-Sawzall or Jab Saw
11-Scraper-putty knife
12-chisel set 3 .25-.50-.75
13-C-Clamps
14-Square - 16x24
15-Jig Saw
16-Drill- cordless
17-Drill bits many styles
18-allen wrench set
19-Flashlight
20-Crescent wrench medium
21-File set for metal
22-Needlenose pliers
23-Prybar flat style
24-Metal Snips
25-Tape Measure
26-Torx Bit set
27-Awl or center punch- nail set
28-allen wrench set
29-Knife- utility
30-Sharpening stone
31-Pencil
32-Pen
33-Magnifying Lens
34-WD40
35-Tool Belt
36-Hatchet
37-Vise
38-Box end-Open end Wrench Set
39-Scissors
40-Ruler-Straightedge
41-Hack Saw
42-Cats Paw nail puller
43-Level
44-Framing Square small
45-Propane Torch
46-Chalk line
47-Voltmeter
48-Angle grinder with wheels
49-Shovel
50-Brushes - Misc types
My grandparents and dad as a kid bought army barracks, took them apart and hauled for a few hrs and built a nice lakeside resort with 8 cabins.
You are profound. Thank you for all that you do.
To be honest, An average day joe could easily have 50 tools and be happy with it, A lot do.
1. Hammer
2. Drill
3. Screw driver set
4. Hex head set
5. Chainsaw depending on the place you live
6. Chains if they count
7. Crow bar
8. Vise
9. Miter saw
10. Flashlight
11. Glock
12. Sledge hammer
13. Welder
14. Soldering iron
15. duct tape
16. Pliers
17. File set
18. Wire cutters
19. Wire strippers
20. Razer blade
21. Level
22. Pencil
23. Tape measure
24. stud finder
25. Pudy knfie
26. Vehicle of some sort
27. Jig saw
28. Vise grips
And that's about all I can think of right now. Those will cover pretty much any around the house job you have.
The Klein 10-in-1, now 11-in-1 are so good. I had my work buy everyone one and I've given them as gifts to many many friends.
I like them alot too, but the sleeve that holds 1/4 in bits didn't hold up well as an extension when chucked up in a drill. I would like the slotted bit to be separate from the philips bit, having them mixed is often frustrating.
When I took a maintenance job in a manufacturing plant the 6-in-1 screwdriver in my pocket got a lot of use. It's a good urban survival tool.
Putty knives are also a wonderful smooth steel slide. lifting/setting sliding glass doors, moving industrial tools or engine components or stone blocks, your tool kit has a perfect smooth surface to slide on that will hold a surprising amount of weight.
Oh, and take a workshop on how to putty with them, or watch some youtube videos and practice. Wooden frame glazing, door & window trim, not to mention other materials that are worked in a putty like state like epoxy putty, gummy sealants, patching plaster, caulking walls or boats, working auto body filler.The skills are very transferable.
You should use these tools for the entire summer next year
My first tool, I was born with...
Second is my 1911A1 .45 ACP..
Third is a Buck 110 Folder..
Fourth is a Hammer Hatchet .
Fiffth is my Truck..
Sixth is a medium set of vice grips pliers.
Seventh is a hand saw that was Father's and Grandfather's..
Eigth is my FN49 rifle that was my Fathers..
Ninth is a medium Crescent Wrench.
Tenth is a Leatherman Surge multi tool...
A 5' crowbar, clawhammer, boltcutters, phase tester, handsaw , shovel and spade, lump hammer, plane, spokeshave, a good tool box, calking gun, a funnel, just some others I use all the time 😊
A really good start for the kit.
I have been waiting for this video. My father is no longer with us and in the time we had together we never discussed what makes up an essential tool kit. Thank you very much Cody.
Funny..I could talk about this stuff all day. You got me with the chalk box, I wouldn't have thought of that one, even though mine is older than I am and I've used it on nearly every large project I've worked on. I might differ in some specifics, a 10 or 12 inch crescent would be my preference, and I have switched to the Klein long reach 6 in 1 screwdriver (the longer shanks I have found more useful). Of course, you could ask 20 men and get 20 different responses. Thanks for the interesting vid, looking forward to the rest!
I’ve found that a high quality heavy duty all steel scissors will cut everything from paper to thicker plastic even thin sheet metal they are very versatile.
What a Great set of videos. Of course, I am patting You on the back, having not seen the rest. But, I love the quality of this subject. And, and, You bring not only Your experience, but have inculcated all the experience from Your family history.
My Bride and I are traveling to California to celebrate a Grand Niece's recent wedding. We will include these 10 tools in a box as a gift.
I will also include lists from future videos as You present them.
You may mention channel lock pliers in a future video, but if you haven't tried the knipex brand cobra channel lock pliers get a pair. Game changer for sure. I haven't found a better gripping pair of pliers yet. If I had to limit a tool kit for weight or some other reason those could take the place of vise grips, regular pliers, and even pipe wrenches. I've used them to remove oil filters, fit pipe, and even used them to remove a stuck spindle nut when I didn't have the proper socket available. I was able to put my hands under the fender and push on the pliers with my foot. Since they self lock once there is tension on them you don't need to squeeze the handles to maintain grip.
What my grandpa did and my dad did which I’m doing now is besides your essential tools they would buy tools as they needed them for projects or working on cars. Buying tools little at at time for decades and now my dad has a garage full of every tool you could ever imagine. You don’t need every tool right away. It takes a lifetime to collect tools.
Gotta get that Amazon Associate money for cyber Monday.
Leave now and never come back!
@@brianh.000 he wasn't wrong
I'm a tool guy and don't own a large pair of side cuts. I have a small pair for electrical work and a specialized flush cut version for trimming pin nails in trim. I think linesman pliers are more versatile and except for really tight places give most of the functionality of sidecuts.
A huge improvement over pliers are the Knipex cobra series, with the 10" my go to tool. The features are far superior to regular pliers and channel locks, but aren't apparent until you use them. The most important is that the geometry doesn't fight you. The harder you twist the harder they bite. Your hand isn't forced open by the torque. They are thin and very strong. Fine teeth. One hand push button adjustment. Parallel jaws with recesses for a firm bite on hexes. My favorite pliers. You won't be disappointed. .
"Eldest" I'm guessing is the book. The entire series is my all time favorite.
Excellent choices ! I'm praying for you and yours
50 Tools You Need To Survive Life | 1 - 10
thanks for the video Cody.
Gods' Blessings to all...
My top ten would be.
1. My pocket knife, super useful, can’t do without.
2. My welder.
3. My grinder, for shaping metal.
4. My sharpening kit.
5. Speed square.
6. My hatchet.
7. My folding saw.
8. My truck, need that.
9. My drafting tools for making blueprints.
10. My cell phone, use it every day, need it for work.
With my welding gear I can make most of the other tools I could need, to exclude screw divers and such. If I was told I could only have 10 tools and never make or trade for more, the list would be different.
Very good advice on the tools. Thank you!
lathe, mill, grinder, bandsaw, oxy acetyl torch, and welder are way high up on my list of needed tools.
Hey youtube paying you? Commercials on your channel today. You deserve it. Another useful video, thanks.
i would say on the pliers make sure they have the cutters at the bottom very useful in a pinch to cut wire or whatnot
one quick thing I want to note is that when it comes to jigsaws corded is nice because you don't have to worry the battery not being fully charged,however that's literally the only benefit vs cordless,if you take into consideration that with a cordless jigsaw you can use it both indoors and outdoors because you don't have to worry about plugging it and you don't have worry about tripping over the cord and you don't have to worry about how long f an extension cord to reach your work area unless you have a receptacle nearby,however the problem with cordless is that some brands aren't very precise with their cutting so I can totally relate to why you use corded,another downside to cordless is that they're always more expensive than corded regardless of what brand you want,but those are just my opinion's on my own personal experience with jigsaws and I thought I'd share.
A lathe and mil would be my first 2 tools
WOW....WRANGLE STAR!!!!!...love this vid....great idea...as soon as i saw the title i got mad,,,serious...cause i use tools everyday,,,,and was waiting what to see.....after watching i agree 100%
Great video series Cody. Perfect for those with a little less real world experience.
Vice Grips aren't as good as they used to be and they are no longer made in the USA. Now when I look for locking pliers, I like the Milwaukees over modern Vice Grips though neither are bad. If I can spend more, Grip on and Proto make great locking pliers. If I remember correctly Snap On rebrands Grip On's locking pliers.
For screwdrivers I think that the best multi screwdriver is the Klein 11 in 1. You get 8 screwdrivers 3 nut drivers. And a lifetime warranty with the quality of Klein tools
Really dig this concept. Can't beat good hand tools
Klein makes a tool that is the 4 in 1 screwdriver, but also includes the bits for punching down phone and ethernet cable. For the work I do (telecom), that's an insanely valuable tool.
Vice grips depending on thicknesses can be used as a clamp if u use a rag or some tissue to protect surfaces
Wow. You are so spot on about the chalk line and can lights. You're the man. Lol. Also, you're not afraid of your faith. I love it. We share a lot of views. Your channel is awesome. Thank you for what you do
Cody as your tongue tried to do 😀 I would include a 10 pound or so maul not a sledgehammer.
Also for use on church mission trip projects I built a table for my jig saw, make it kind of like a band saw. It clamps to the tail board of my pickup.
My brother is a straight A student at a top university and he can't figure out how to use a screwdriver. Anyways, for someone just starting out with tools, get a nice solid tool chest and be ORGANIZED. Get a sturdy workbench with a nice Taiwanese made vise. No need to buy top quality tools at first, but NEVER buy cheap junk like Black and Decker. Mid-grade tools are good for someone getting into DIY projects as a hobby. For power tools, cheapish brands like Skil or Ryobi are fine for household use, but always get good quality accessories. Also do not buy cordless tools unless you absolutely need the portability.
Vise Grips and ducktape will be all you ever need!
Only disagree with the size of the Crescent. I'd go with a 10". To each their own, definitely enjoy watching and getting your insight and reinforcement of my knowledge of tools.
For me. Groove goint pliers, multi screwdriver, utility knife, cable cutters
Have a blessed Thanksgiving Cody
Glad to see how many of these I already have!! This series will be very helpful, though, in building a good set for my son. Looking forward to the rest of the series. Have a Happy Thanksgiving, Wranglerstar Family!!
Well thought out. I have most items, but missing a few. Chalk Box is now on my list. BTW Cody I highly Reccomended taking notes/ To Do lists utilizing “ FIELD NOTES” inspired by the vanishing sub genre of agriculture memo books, ornate pocket ledgers. Subscription based. Old School, but yet so 😎.. Made In the 🇺🇸... An honest memo book worth fillin’up with GOOD INFORMATION. As always. Great list.... Looking forward to part #2
Great video, I like Ryobi tools and enjoy the content. Thanks Cody!
Off to a good start, got 1-10 already!
Would like to see a video entitled "Surprisingly useful totally um-necessary tools". A few examples from my list include: Jaw horse, Edge clamps, double-sided tape (to cut multiple pieces at one time), spring-loaded punch, elongated marker, etc.
Dang good series, thanks Wranglerstar!
Ur tool videos are awesome they help me alot
I have to disagree with using Ryobi. I have had mine for years and use it a ton. And I love it it's been a very reliable useful tool.
Hi Cody, I have been getting rid of all my coded tools, I was fed up with every time I wanted something the cord would be tangled with all sorts of other tools, so I bit the bullet and cut off all the cords. I bought twenty good quality three pin connectors and put the mail connection onto all my tools. I then bought a fifty-foot reel of good quality flexible three cord wire and made several extensions ten feet, fifteen feet, and twenty-five feet extension and I have never looked back, I got the idea from Festool and it is so much easier to keep tools that do not have long cords on them and I use less room storing them as well.
I have Craftsman locking pliers, and they are great! They have a longer piece of metal that sticks out past the handles, so getting them open is much easier.
Locking pliers are my favorite hand tool
lol at "but they're silly" that was hilarious to me for some reason.
The tools I always have on my belt are: Klein 11 in 1 screwdriver, Leatherman Wave with the bit kit, side cutter, 18-10 awg wire strippers, a panel screw driver(insulated), a terminal screwdriver(insulated), folding utility knife, a straight blade folding knife, 8” crescent, small slip groove interlocking plyers, and a pouch containing a set of hone stones. I use these tools on a daily basis and that covers a huge variety of situations.
There is a wide chasm between a tradesman and a master craftsman.
I hope we see a bottle jack on the list.
Great set of tools. For the screwdriver I’d choose a Klein 11-1, has Phillips, flat, torx, and square drives. I’d also get an adjustable spud wrench, can use it as a punch, align holes, and a pry bar if need be. Keep up the good work and stay safe
Great video. Love the series idea.
My Granddad put a basement in his house the same way. When I was a young teen, my dad, uncle, and I helped him finish digging out the last part, and poured a slab floor. Your story reminded me of that. I remember him handling his miner's pick with casual familiarity, as much as he was able to work by then. I suspect my uncle still has Grandad's pick, I should call him. I know no one else in the family would have interest in it. I also detest plastic handles, but my "truck" shovel that rides year round in the back of my truck has one. I live near Astoria, it rains here, if you hadn't heard, lol.
brilliant video series idea. I am very excited to see the entire 50.
CODY!!!!!! I just saw that you can now get Stihl chainsaw socks! If you don't have them already, you have to put them on your Christmas list! 😀
I have a dial indicator set that has a vice-grip adapted as a indicator base. Just one more use for clamping pliers.
I live the klein 10n1. I just Vise Grips alot. mainly for holding shocks for that bolt that always strips or breaks off lol. needle nose vise grips for hose clamp pliers
If #1 is a sledgehammer i can tell this is gonna be a good list
Is that book you were reading part of the inheritance cycle.
I love that series!
A tool that I could not live without is defiantly an angle grinder. I use them for all kinds of things pretty much everyday.
I'm a Ryobi fan but I also am a new homeowner not a contractor. I've used a Makita drill and it definitely has more torque than Ryobi and is built beefier but for my purpose I can make my budget go a lot further buying Ryobi and they work just fine. Zero issues thus far and I know others who agree that have used other types of tools.
Definitely on most things corded go with the better quality, it's not going to be that much more expensive. On cordless I'm going to stick with Ryobi for awhile.
Im buddying up with this man when the apocalypse happens haha
Best screw driver is the Canadian classic "Picquic." They come as SEA or MM hex as well as torx too. I keep all 4 in the tool bag encase I have someone working with me or I want to work more productively.
What counts as a tool? An entire socket set, or just the ratchet handle, for instance?
If you don't have enough pressure to get a bolt undone with the adjustable spanner or any spanner you can use a length of pole to make it easier.
U forgot 1 thing.... The Knipex 12'' 88 01 300 Alligator pliers. These i have with me 24/7. Here in the Netherlands we call them 'waterpomptang' wich means water pump pliers. Every man has one in his toolkit, cheap brand or the best like the Knipex.
Great lighting Cody
I am taking notes of what I should purchase :) As many as I do have already.... I miss vicegrip, not mentioning I havent purchase a good jigsaw yet. It is time to have a shop run!
Very good ideas, and practical. Thanks Cody.
The crescent wrench here in Australia we call that a shifter not to be confused with the one you use to change gears in your car.
Out of all the tools that is the only one we call it different.
In a pinch you can chuck the shaft of that 6n1 screwdriver up in the drill.
Excellent video series, can't wait to see the rest!
I didn’t realize how many holes I had in my collection until I watched this video series.
You could never go wrong with Vice Grips. The originals were made here in Nebraska in Dewitt, will be stamped on the side of the vice grip. There were made here and the name had also changed to American Tool, until they shut the plant down and moved production to China in 2008. Something like 330 people lost their jobs and really hurt the town of Dewitt, then eventually was bought out by Malco. Still very good tool, most now have wire cutters built into them and there are different models from Vice Grip C clamps and even chain strap wrenches.
Chainsaw would be my #1 choice. Like a 361 Stihl.
Looking at it today I would urgently advice to replace crescent wrench with one Knipex pliers wrench - opens wider with smaller size, does all the same more convenient and more.
I ditched about 3 kilograms of wrenches for just one Knipex pliers wrench in my work toolbox.
Totally agree and I'm glad to see someone said something about this tool, because I was going to. I have 3 sizes and made sure my family has them as well. I'll never use/buy a crescent wrench again.
Klein makes a very nice 11 in 1 screwdriver I have 3 of them and they are damn handy.