Excellent tip for the cooler months some of us experience - we all love to be creative when we can't be outdoors so this still gives us a chance to use resin, but wisely in a controlled environment. Thanks.
Do you have any suggestions for doing resin art in the winter in your house? The house temp drops at night as the heater does not go on as often is there any way to counteract this?
Hi Dani, the ideal temperature for curing your ArtResin is between 75-85F. It is best to keep the temperature consistent for the first 24 hours. If you are finding the temperature fluctuation is affecting your cure-you may want to set your thermostat for a more consistent temperature for that 24 hours.
Glad to find I can save my project! Tacky after 10 hours - normally I can touch them after 6. I moved them to my bathroom and put them near the heater and closed the door. A few hours later, the tackiness is gone!
Hi Aurielle, please feel free to reach out to our customer support team and send photos if you have them. We would be happy to help you out! support@artresin.com
So much information and all of it good! Thank you so much! I don’t have the luxury of a studio and use my home. Keeping it at 75° would be horrible for me for a couple days 😅, but I will try and deal with it. Again, thank you so much!
Thank you for sharing your expertise, and explaining the reason my resin took a week or more to cure in winter, my one and only attempt, I along with other first timers had andecided to wait until the seasons warm. Still 2 months away here in Australia.
It is always advised to cover your resin while it cures to prevent any dust or hair from falling onto the surface. Maintaining a constant temperature for the first 24 hours of your cure time is important as temperature fluctuations can leave you with surface imperfections and slow cures.
I just wanted to ask if it’s safe to leave the resin cure in your house with young children. And also can you work with resin in a cold winters day out in the garage ?
Hi Shawana, yes it's safe to let your resin cure inside your home. ArtResin has been evaluated by the American Society for Testing and Materials (ASTM) and has been designated non-toxic when used as directed and safe for home use in a well ventilated area. For more information, please visit our website and check out our Safety Data Sheet & Blog - ArtResin Is Safe For Home Use. www.artresin.com/blogs/artresin/41788993-artresin-is-safe-for-home-use?_pos=1&_sid=37f5a3951&_ss=r www.artresin.com/pages/sds You also asked about working with resin during the winter in your garage? The ideal temperature for both your ArtResin and your workspace is slightly warmer than room temperature: 75-85F or 24-30C. Resin won't harden properly if the temperature is too low. For more information about working with ArtResin during those cooler months, please visit our blog - How Does Cold Weather Affect ArtResin www.artresin.com/blogs/artresin/what-is-the-perfect-temperature-to-cure-epoxy-resin?_pos=1&_sid=e4b177259&_ss=r
This video was really helpful. My resin art work tends to get wrinkly like when you keep a hot coffee in an open cold area, and it's surface starts to wrinkle. I'm getting the exact same texture. Read a lot of articles, watched a lot of videos. No solution found. 😅🥺 And it's becoming a big problem now. Don't know what to do about it.
This can happen if your temperature fluctuates during curing or if you move your resined pieces before they have fully cured, or if you use your torch after the resin has started to cure.
This has been happening to my pieces too. Cannot understand why. I've tried everything. I keep checking without touching or moving them. Might be some fluctuation in temp while curing as they are usually left overnight and the temp won't be the same as in the day. Maybe I need to make things early morning so the temp is fairly constant for more hours.
Thank you for this. I was wondering what would be the cause of resin that is kind of hard however not fully hard and not sticky. Somewhat like a hard jelly consistency?
Hi, the ideal temperature for both your resin and your workspace is between 75-85F. Resin that is colder, or left to cure in a colder workspace will take longer to cure and may end up sticky, or not cure at all. The best way to warm up your resin is to give your resin and hardener a warm water bath before you mix them. Please visit our website for more information www.artresin.com/blogs/artresin/should-i-warm-epoxy-resin-in-a-water-bath-before-mixing?_pos=1&_sid=6ce2c62e5&_ss=r
Thank you for sharing! But i recently topcoated my resin coasters after sanding and let it cure for 24hrs but i have a wrinkled effect on the corners. What could possibly be the reason. Pls help
Hi there, I am sorry that you have some imperfections in the final layer of your resin. Would you be able to send photos of the problem to our customer service department, they will be able to help determine what happened here. Thanks! support@artresin.com
ArtResin is an epoxy resin which is different than a UV curing resin. Epoxy resin does not cure using a UV lamp, it will take 24 hours to feel cured to the touch and will reach its full cure in 72 hours at recommended temperatures between 75-85F.
Hi! I want to start using Resin and since it´s still very cold now, these tips are definitely very helpful, but i do have one question: Since you´re supposed to work in a ventilated room but at the same time a warm room, how does that work in winter? Because even if I heat up the room I work in, as soon as I open the windows so that it´s ventilated for the work and cure process, it would get cold because of the cold temperatures outside. Is there any way to resolve this issue?
Hi Veronika, ArtResin is safe to use at home in a well ventilated area, meaning a room that is open with air circulation, for example-do not close yourself in a closet with no fresh air. Everyone has different sensitivities and comfort levels so you can absolutely open the windows while you are working in the room, then close them when you leave your artwork to cure. It is important to maintain a constant temperature especially during the first 24 hours of cure time. I hope this helps!
@@Artresin Okay thank you very much! How does it work if i colorize the resin? Because I read in one of your replies to someone that that could end up making the resin toxic again because of the reaction the ink has with the resin. Should i work outside then?
@@-veronika-3039 we use our own line of tints called ResinTint, they are mineral oil based so won't cause a problem when mixed with ArtResin. One tip to keep in mind when tinting your resin: not all colorants are food safe, so to be assured that your finished piece is food safe simply apply a coat of clear, un-tinted ArtResin as final coat and you will know that the surface that your foods come in contact with is indeed food safe.
Hi I had a question. I was thinking for the fall and winter of working in my garage for the resin. I will be able to store the resin inside my house. But I was thinking about using and making my art pieces in the garage with the garage door open so I can try to ventilate the area. and storing them in the garage. Will this mess up the pieces my working in a cooler area and storing it there?
Thanks a ZILLION for this!!! It was very VERY useful since I JUST started resin and immediately faced this problem - it's winter here n it's not snowing but it's cold. VERY cold. So thanks again 💕💕💕
You can use a space heater, you just really want to focus on avoiding temperature fluctuations during the first 24 hours and keeping the area warm-ideally between 75-85F.
very helpful information. Glad to know I can still successfully use resin through the winter up here in Maine by making sure my resin and room are warm enough!
When I first bought my Art Resin, the delivery person put in in the snow bank outside by my garage! I was waiting for it ,but they delivered sometime in the evening. The next day I got an email, that it had been delivered. So I went outside, and sure enough! There my package sit, in the snow and frozen! I was so upset, thinking it was ruined. But I wrote directly to Art Resin, and got a prompt reply. No worries. Warmed up my resin and it has worked beautifully since then!
Great Video, I do have a Question... I'm an Artist and I do really Big Pieces, ex: 4X6 and up, This next Piece I will be attempting to Resin it... Can you Please let me know, How I can successfully Pour and not get Pooling in the middle of the Canvas...The support bars behind this Piece are slanted on all 4 corners... Some say use Cardboard, some say paint on wood, but for me, that is not an option... but I'm a lil Leary about it... Any Tips or Advice would be GREAT. and so Appreciated... Thank you
This video will be of help to you: th-cam.com/video/AJ8mrJ8WWuE/w-d-xo.html We brace ours with both wood and cardboard to be sure the entire canvas is supported :)
Great video. What happens other way around. What if it's a hot non a.c. room, hotter than your range. Will it dipple as well or just cure slower? Too expensive to keep a.c. going 24x7 in a studio when not in it.
Humidity will be what will cause the most issues in warmer temperatures. High humidity could cause dimples or issues with curing the ideal humidity is below 50%. If your room is very warm you will likely shorten the working time of the resin and it will begin to set up a little faster.
I am pouring resin into a clear tube for a specific art project and sometimes it pulls away from the inner edge as it's curing, leaving large voids (not a bubble) I have used warm resin, but my room is cold - could that be the reason for it? Would curing on a heating mat help?
Hi Teresa, generally the cold temperature will slow down the cure, not necessarily cause the pulling away. For best results, try to keep your room between 75-85F throughout the first 24 hours of the cure time. Would you be able to send photos of the problem you are having to our support team? They can have a look and help figure out whats happening. You can email our customer service team at support@artresin.com Thanks!
My workspace is the enclosed porch and its perfect in summer and early Fall, but now the temps are dropping, my porch is cold, I may have to close shop till the weather is better. This is my 1st year using resin. Can I use this product inside my house?
Yes, ArtResin has been evaluated by the American Society for Testing and Materials (ASTM) and has been designated non-toxic when used as directed and safe for home use in a well ventilated area! Please see our website for more information www.artresin.com/blogs/artresin/41788993-artresin-is-safe-for-home-use?_pos=1&_sid=5afcb239b&_ss=r
I got a 1 gallon bottle of resin never opened i stored it in my cabinet i went to use it for 1st time yesterday to find my part A resin has gone solid white on the bottom of the bottle do i throw it away or can it be fixed.
what wasthe room temperature though? i live in scotland my house is 50 F Iin winter i bought your resin just checking on room temperature first actual number?
Thank you for sharing,I really wished i watched this video before starting my pour,my room is quite cold when I'm not using it,and i noticed my resin was a thick consistency. Thank you for the tips,I'll definitely be trying them 🙂
The hardener can oxidize over time and take on a yellowish hue. For best clarity, we recommend using your ArtResin within 12 months of the date of manufacture and within 6 months after opening. The hardener will still work perfectly fine despite its colour, we just would recommend saving it for use in pours that you will be tinting or pouring over natural wood or dark backgrounds where the slight yellow wont show. Have a look at our blog for more details: www.artresin.com/blogs/artresin/what-can-you-do-with-yellowed-hardener-and-resin?_pos=1&_sid=384bdaddc&_ss=r
Thank you, brilliant tips. Quick question, can resin alter the colour of your prints. (on canvas) I used mod podge to glue down a printed paper collage, after applying the resin some dark marks have appeared on the pictures. Could this be a resin problem or something else? Thanking you in advance for some advice.
Paper will absorb the resin and cause it to appear dark and wet. You can avoid this next time by applying a couple coats of sealer over your paper-even your Mod Podge will work, be sure to get the edges too. Use a sealer that dries clear and ensure that it is completely dry before pouring on your ArtResin.
What would you suggest for someone who needs to do resin outside because I don’t want to do it inside my house? I don’t have a garage to do it in. I have been trying to find something that is temperature adjustable that can be left outside.
Hi Re'Shell, We do not recommend using ArtResin outdoors or letting it cure outdoors for the simple reason that even the slightest dip in temperature during the first 24hrs of curing can leave you with a rippled effect, that we call the "orange peel" effect on your cured resin. The ideal temperature for working with ArtResin is between 75-85F, and for best results a consistent temperature is required during the first 24hrs of curing.
Right now I'm doing resin projects in the garage for proper ventilation (ohio) I noticed you don't wear a mask - would it be reasonable to do these in my basement instead of garage?
The ArtResin formula has no VOCs (volatile organic compounds), no fumes, and is safe for home use in a well ventilated area. It is a clean system, meaning everything in the formula reacts together, leaving nothing that can become airborne and be breathed in. If your basement is well ventilated, a respirator is not required. ArtResin has been recognized by the American Society for Testing and Materials (ASTM) as meeting safety standard D-4236: Safe for Home Use when used as directed.
Thanks Joanne for this video. I think realistically speaking there is going to be a fluctuation in temperature because it's the Winter. Perhaps a slight drop in a few degrees won't affect it? I would think with a cardboard covering and masking off the bottom edges would help keep the cold out.
Hey Mike - glad you enjoyed the video! I'm sure a drop of a few degrees wouldn't have an effect but resin can be a little fussy and loves warm, dry and stable conditions best :) I was showing worst case scenario ( high to low temps ) to illustrate how important temperature stability is and what kind of an effect it can have on resin. I know a lot of customers like to place their pieces in a sunny spot to cure, but can end up with surface imperfections this way. And you're right, a nice secure cover will help keep it insulated and warm.
@@Artresin well to be honest Winter isn't the most popular season for resin making! I've worked with Artresin before, it does tend to require a longer curing time to achieve a really hard surface. But that said it's probably the best of them all if you're doing arty things and work with paints and crafts. I make skate decks and love making resin art so that's why I returned to AR for its longer work time. My order should come this week. There are resins I've worked with that can endure a minimum of around 18°C and cure pretty hard under 24hrs. But these are woodworking resins which don't require the aesthetics as yours does.
Can you bring your resin when poured in the house if you seal it in a plastic container. I’m worried I only have a shed to work in but at night in the winter it will drop. Can’t do it in the house as the fumes and I have cats. I’m worried I will not be able to make my stuff as in the uk the temperature always drops at night any suggestions please
Yes you can. ArtResin is non toxic and does not produce harmful fumes-it is safe for home use when used as directed in a well ventilated area. Once your resin has started to cure, you want to avoid moving it around as the movement can cause imperfections in the surface. You also want to avoid temperature fluctuations especially within the first 24 hours of cure time.
excessive heat, like that from the flame of a torch can damage the silicone mold and cause your resin to stick and mold to tear. Its recommended to avoid using a torch with a silicone mold.
I poured about 1/2 inch thick of resin in a fish bowl and overnight left it in a cold garage, in the morning all of it had evaporated, is it the cold that causes this?
Hi Alec, ArtResin is non-toxic and safe for home use, when used as directed. So, that means when you work in a well ventilated area, you are not required to wear a respirator. Here is a link to our blog on what safety precautions you should take while using ArtResin: www.artresin.com/blogs/artresin/what-safety-precautions-should-i-take-when-using-artresin?_pos=3&_sid=beb61d212&_ss=r
i gave up on trying to get my statues like shinny glass on the outside with resin ...theres always an issue... instead i coat, sand smooth and paint... once i setup a nice paint station i may just finish them with auto paint and clear.. resin hides most of 3d lines and adds strength... uv resin is kinda costly so i will still use 2 part which i think is stronger.. thanks for all your tips..
Glad you enjoyed it! We have how to clean your tools lined up for a future video but here are a couple of options: you can wipe out any excess resin with paper towel, then spritz the measuring cup with isopropyl alcohol to break down any remaining resin residue. Wipe it out and repeat this step as many times as necessary. Once all the residue is gone, then you can wash your measuring cup in hot soapy water. Whatever you do, don't pour any resin down the drain. The second option is to leave your tools on a plastic surface ( turn the measuring cup upside down so that the resin all pools out onto your plastic lined work surface ) and let the resin dry .. the next day, simply peel the resin out.
at about 12mins, you say to re pour if after another 24 hrs it hasn't cured and still sticky. Do you mean to mix another batch and re pour onto the same sticky surface? Or start a new project all together?
Hi Laura - if it is still sticky after 24 hours you can mix and pour another batch right on top :) Here is one of our blogs on sticky resin that may be of help: www.artresin.com/blogs/artresin/oh-sh-t-series-episode-1-sticky
Nice imformation..thans..i am biginer i was going to start this rezin art .i like too much..but i was gathering the imformetion..thanks again..i get a clue..for cold wether....very important..for me
Thought this was a great informative video but I do have a couple of questions. Can Art Resin be frozen (left out by delivery man etc), thawed out, brought to room temp and still be usable? If you use plastic measuring cups will the dried resin be able to be pulled out of them (assuming you have drained them while still wet)?
Yes and your thought process is exactly right, the product will just need to be brought back up to room temperature and thawed out and it will be good to go. As far as your measuring cups we like to wipe them out with a paper towel and some denatured alcohol to remove the little bit of excess resin and then they are good to be reused on your next project :)
great tips! question: if your second example (the black surfaces) get reheated with a torch will that help get rid of the dimpling? and then continue curing at room temp?
Hi Ro - great question! The black pieces, all 3 of them, did end up curing dry to the touch so for best results, a sand down and repour of ArtResin would be the way to go. If the resin was still tacky ( ie not fully cured ) it would definitely be worth a shot with a heat gun or even a hair dryer. I wouldn't use a torch - the flame would be too intense and you'd likely scorch your resin.
ArtResin is measured in a 1:1 ratio, so be sure to measure an equal part resin and hardener by volume every time. Not all epoxy resin is measured the same, so be sure to follow the instructions for the brand you are using.
I really love the glass like finish I get from Art Resin but I do struggle with runs down the side of dotted mandala stones. I resin the bottom half of the precast stone first, let it dry and cure, then do the same to the top half. As I mentioned I nearly always get runs down the side which for me, really spoils an otherwise perfect finish. Do you have any help or advice to offer at all please?
Hi Mike, I am unsure of your process but I would try to brush on very thin coats. Maybe even letting the resin sit for 15-20 minutes before coating so that it does begin to thicken up a bit. Hope that helps :)
We recommend letting ArtResin cure in a room with a temperature of approximately 75-85F. You will want to avoid temperature fluctuations within the first 24 hours, for this reason, setting your curing resin in a sunny window would not be the best option.
Hi Picco, We are happy to tell you that ArtResin is non-toxic, produces no fumes or VOC's and is safe for home use when used as directed. So, when you use ArtResin in a well ventilated area, there is no need to use a respirator. Here is a link to tell you more about how to work safely with ArtResin: www.artresin.com/blogs/artresin/what-safety-precautions-should-i-take-when-using-artresin?_pos=3&_sid=4d854de57&_ss=r
Interesting, I live on the east coast and it gets cold, but then again the temperature can vary in any location in North America. Keeping my space at 24 C will be expensive and difficult. What was the temperature in the garage? What was the temperature in the studio?
Hi Alan - these are excellent questions - you're right, I should have included them in the video! We are just outside Toronto and we filmed last week. The studio was about 75F/24C when we filmed and the garage was as cold as it was outside - so a few degrees above 32F/0C in the day and then dropped below 0C overnight. I wouldn't go below 72F/22C and I think the key is to keep the temperature stable, otherwise you may end up with surface imperfections. Resin can be a little fussy and definitely loves warm temperatures best.
When the resin and hardener are mixed, it will begin to build up some heat but does not become hot to the touch when used as directed. Here is a link to one of our blogs on this topic: www.artresin.com/blogs/artresin/why-does-my-epoxy-resin-feel-hot
The torch is the fastest and most effective way to remove bubbles. Have a look at this video where we compare different methods: th-cam.com/video/IIAM-U5lhQI/w-d-xo.html
Shoot, my shop in Colorado is not insulated and very difficult to keep warm. I’m beginning to think I may have to put all of my resin/finish work on hold for the next six months or more. Thanks for the tips though!
Thankyou for sharing such an amazing tip. I had a query when I put the final layer of the resin on my work at the time of curing I begin to see it wrinkling, could you tell me the reason behind this and how can I fix this?
Hi Deirdre, make sure that there is no vent or air blowing on your resin surface, do not move your artwork and be sure to avoid temperature fluctuations while curing. Over torching can also cause ripples in the surface. If you still have problems, reach out to us at support@artresin.com
Does anyone know how well resin holds up to cold? By that I mean once cured (in normal conditions) if I wanted to say run a cooling pipe in the piece of resin would it work?
Hi James, We haven't tested this exact thing but we do know that once fully cured and used as directed it does well in cold weather. We have had outdoor pieces last through the Canadian winter with no issues. If you are able to test on a non masterpiece I would recommend doing so.
It could be! Check that micro bubbles are not making your resin look white and milky. If so, use a warm water bath to help clear them out. If your finish is cloudy and dull it could also be a result of too much moisture or humidity. Double check the humidity in your workspace and ensure that you never let any moisture get into your resin mixture.
Hi Aiman, wrinkles in your cured resin can happen for a couple of different reasons. First, if there is a dip in temperature during the first 24hrs of curing this can cause what we call the "orange peel" effect, or as you said wrinkles in your cured resin. A constant temperature is needed during the first 24hrs of curing for best results. Second, wrinkles can also be the result of over torching. The good news is that we can make those wrinkles disappear with some sanding and a second coat of ArtResin :) Please visit our website for details www.artresin.com/blogs/artresin/44594177-how-to-apply-a-second-coat?_pos=2&_sid=85efef3c7&_ss=r
@@Artresin hey I don’t over torch it. I use a heat gun and use it only once after pouring. And I live where the temperature is 16-10•c. I warm the room and resin. But still had those lines. And I even sand my resin art piece and poured a next layer but still have them
@@aimanabbas4261 Hi Aiman, sorry to hear you are having issues with your resin cure. Please reach out to our customer service team at support@artresin.com and include any pictures you might have. They will be better able to help you.
i live in Australia. temp. in winter is 16degrees during day and 6 degrees or less at night. This is my dilema .( No central heating except a gas heater.)
Using a space heater in the room where you plan to use your ArtResin can help. The ideal temperature is 24-30C, so try to get at least close to 22/24C if possible. Keeping a steady temperature for the first 24 hours is important to avoid any surface imperfections.
Fluctuations in temperature during your cure can have an affect on the finish, mostly causing a rippling effect or "orange peel" effect, but doesn't necessarily affect the glossy shine. Too much humidity in the air can affect the shine by leaving a hazy or cloudy surface finish sometimes.
Cold temperatures can slow down the curing process. We recommend allowing your ArtResin to cure in a warm room (75-85F) for best results. If you have resin that is slow to cure, try warming up your room a bit. If your resin remains sticky, it could be that your mixture was off and you may need to re-pour a second layer to fix.
@@Artresin I did mix it very well for like 3 min but the resin was cold and thick. also, every time I put a cup or something heavy it leaves a mark on the surface of the tray/coaster what did I do wrong?
Hi Jane - ArtResin has been evaluated by toxicologists at the American Society for Testing and Materials (ASTM) and has been designated non-toxic when used as directed and safe for home use in a well ventilated area. If you've added colorants/additions that may be toxic or that contain solvents ( such as alcohol ink ) then a respirator is recommended.
ArtResin is heat resistant to 120 degrees F. So those hot summer days, if left outside or in direct sunlight could soften the resin some but when brought back down in temperature it will harden right back up. One of the most important factors to ensure your epoxy resin cures properly is temperature. The ideal temperature for both your ArtResin and your workspace is slightly warmer than room temperature: 75-85F or 24-30C. You also want it to be dry, 50% humidity is ideal and stable meaning no dips in temperature during the first 24hrs.
Hi I just wanted to know where can I get a torch and the resin mix because I AM TRYING TO MAKE A WHITE MARBLE CROSS WITH LIGHTS AND GOLD GLITTER FOR MY MOM WHO PASSED AWAY LAST YEAR O HOW I MISS MY MOM SOOOOOOOOOO VERY MUCH AND I JUST WANTED TO KNOW IF I MIXED THE WHITE MARBLE ROCKS AND GOLD GLITTER ALL TOGETHER AND POUR IT ALL TOGETHER AND THEN POUR IT ALL INTO A CROSS SHAPE MOLD THEN LET IT SET AND WHEN FINISHED COULD IT WITH STAND THE WEATHER BECAUSE I WANT TO MAKE IT FOR MY MOM HEAD STONE THAT'S WHY I AM ASKING JUST WANTED TO KNOW IF THIS WILL WORK THANKS FOR SHARING AND THANKS FOR YOUR TIME AND HELP THANKS AGAIN GOD BLESS YOU AND YOUR FAMILY ETERNALLY IN JESUS NAME AMEN N AMEN HALLELUJAH AMEN THANKS AGAIN GOD BLESS
So sorry for your loss Grace. What a sweet project you have in mind. It is important to note that once cured, ArtResin is weather resistant and waterproof and while many artist do use it for outdoor pieces we still don't recommend that you put it outside. With its advanced UV and Hindered Amine Light Stabilizers, ArtResin is chemically engineered to offer the best protection against yellowing on the market. Even so, it doesn't make sense to deliberately put your artwork in an environment full of UV rays - it makes it much harder for ArtResin's UV stabilization to do its job :)
The absolute best video about general epoxy temps. Thank you. Awesome.
Thanks Cody....being in Ontario Canada gives us some first hand knowledge about how to handle cold temps :)
The best tutorial I ever seen! Thank you!!👍👍
Excellent tip for the cooler months some of us experience - we all love to be creative when we can't be outdoors so this still gives us a chance to use resin, but wisely in a controlled environment. Thanks.
Great video, it really helped me to understand some of the issues that I’ve encountered with epoxy pours not curing properly. Thanks!
Wow, now this is what I call a really great tutorial video. Thank you so much, I learned so much and feel ready to tackle my project. ☺️
Thanks Elizabeth!
Thank u so much for this Amazing, Very Informative Tutorial!!!! I learnt a lot!!!!
what a great video. well done to you!
very good video thanks it answered my questions
Thank you so much dear. your video really solve my problem.😊❤
You are literally my Resin Doctor. Thanks a lot! ❤️
Doctor ArtResin....it has a nice ring to it 😁. We are so happy to help!!
Thank you for sharing this valuable information.
Do you have any suggestions for doing resin art in the winter in your house? The house temp drops at night as the heater does not go on as often is there any way to counteract this?
Hi Dani, the ideal temperature for curing your ArtResin is between 75-85F. It is best to keep the temperature consistent for the first 24 hours. If you are finding the temperature fluctuation is affecting your cure-you may want to set your thermostat for a more consistent temperature for that 24 hours.
Wonderful information! In Massachusetts here and I've been having problems with resin not curing. Now I know why! Thank you!
Happy to help! Please reach out to us at support@artresin.com anytime you have questions :)
Thank you! This helped me a lot ❤️
Glad to find I can save my project! Tacky after 10 hours - normally I can touch them after 6. I moved them to my bathroom and put them near the heater and closed the door. A few hours later, the tackiness is gone!
Thats great news! Sometimes it is that simple- glad it worked out.
Thank you for doing these tests! Excellent information!
Thanks Caren - glad you enjoyed it!
Thanks, I live in the southern hemisphere where it's very warm but this still happened!
Hi Aurielle, please feel free to reach out to our customer support team and send photos if you have them. We would be happy to help you out! support@artresin.com
Living in the Uk this is very helpful thank you so much
So much information and all of it good! Thank you so much! I don’t have the luxury of a studio and use my home. Keeping it at 75° would be horrible for me for a couple days 😅, but I will try and deal with it. Again, thank you so much!
I wish I had watched this two days ago! Talk about bubbles! 😂 Thanks for this great info!
😭😭5 😭 5th😭555555 😁
Thank you for sharing your expertise, and explaining the reason my resin took a week or more to cure in winter, my one and only attempt, I along with other first timers had andecided to wait until the seasons warm. Still 2 months away here in Australia.
Hi if you don't have a torch can you use a heat gun
My apartment temperature fluctuates, do you recommend I cover it with a plastic cover container? Thank you 😊
It is always advised to cover your resin while it cures to prevent any dust or hair from falling onto the surface. Maintaining a constant temperature for the first 24 hours of your cure time is important as temperature fluctuations can leave you with surface imperfections and slow cures.
I just wanted to ask if it’s safe to leave the resin cure in your house with young children. And also can you work with resin in a cold winters day out in the garage ?
Hi Shawana, yes it's safe to let your resin cure inside your home. ArtResin has been evaluated by the American Society for Testing and Materials (ASTM) and has been designated non-toxic when used as directed and safe for home use in a well ventilated area. For more information, please visit our website and check out our Safety Data Sheet & Blog - ArtResin Is Safe For Home Use.
www.artresin.com/blogs/artresin/41788993-artresin-is-safe-for-home-use?_pos=1&_sid=37f5a3951&_ss=r
www.artresin.com/pages/sds
You also asked about working with resin during the winter in your garage? The ideal temperature for both your ArtResin and your workspace is slightly warmer than room temperature: 75-85F or 24-30C. Resin won't harden properly if the temperature is too low. For more information about working with ArtResin during those cooler months, please visit our blog - How Does Cold Weather Affect ArtResin
www.artresin.com/blogs/artresin/what-is-the-perfect-temperature-to-cure-epoxy-resin?_pos=1&_sid=e4b177259&_ss=r
This video was really helpful. My resin art work tends to get wrinkly like when you keep a hot coffee in an open cold area, and it's surface starts to wrinkle. I'm getting the exact same texture. Read a lot of articles, watched a lot of videos. No solution found. 😅🥺 And it's becoming a big problem now. Don't know what to do about it.
This can happen if your temperature fluctuates during curing or if you move your resined pieces before they have fully cured, or if you use your torch after the resin has started to cure.
This has been happening to my pieces too. Cannot understand why. I've tried everything. I keep checking without touching or moving them. Might be some fluctuation in temp while curing as they are usually left overnight and the temp won't be the same as in the day. Maybe I need to make things early morning so the temp is fairly constant for more hours.
Thank you for this. I was wondering what would be the cause of resin that is kind of hard however not fully hard and not sticky. Somewhat like a hard jelly consistency?
Thanks for the tips. Is a respirator needed to use ArtResin?
Absolutely brilliant, Iam going to try this, hopefully it solves my problems, thank you
Thank you so much for this information... I was literally struggling with this problem. 💞
Thanks for watching--we are glad it helped :)
Does resin cure when it's cold & thick when mixing?
Hi, the ideal temperature for both your resin and your workspace is between 75-85F. Resin that is colder, or left to cure in a colder workspace will take longer to cure and may end up sticky, or not cure at all. The best way to warm up your resin is to give your resin and hardener a warm water bath before you mix them. Please visit our website for more information www.artresin.com/blogs/artresin/should-i-warm-epoxy-resin-in-a-water-bath-before-mixing?_pos=1&_sid=6ce2c62e5&_ss=r
So I just got resin in the mail today and it was like frozen or crystalized. Is it still good will it be better tomorrow?
Hi Kay, bring it inside and let it come to room temperature. It should be fine :)
Thank you for sharing! But i recently topcoated my resin coasters after sanding and let it cure for 24hrs but i have a wrinkled effect on the corners. What could possibly be the reason. Pls help
Hi there, I am sorry that you have some imperfections in the final layer of your resin. Would you be able to send photos of the problem to our customer service department, they will be able to help determine what happened here. Thanks! support@artresin.com
Great info for a beginner. Tks
thanks for watching! Be sure to check out our website www.artresin.com and search our blogs and FAQs for a ton of information!
Question; If you do live in cold temperature because it's winter, can I use UV lighting for the curing process?
ArtResin is an epoxy resin which is different than a UV curing resin. Epoxy resin does not cure using a UV lamp, it will take 24 hours to feel cured to the touch and will reach its full cure in 72 hours at recommended temperatures between 75-85F.
Hi! I want to start using Resin and since it´s still very cold now, these tips are definitely very helpful, but i do have one question: Since you´re supposed to work in a ventilated room but at the same time a warm room, how does that work in winter? Because even if I heat up the room I work in, as soon as I open the windows so that it´s ventilated for the work and cure process, it would get cold because of the cold temperatures outside. Is there any way to resolve this issue?
Hi Veronika, ArtResin is safe to use at home in a well ventilated area, meaning a room that is open with air circulation, for example-do not close yourself in a closet with no fresh air. Everyone has different sensitivities and comfort levels so you can absolutely open the windows while you are working in the room, then close them when you leave your artwork to cure. It is important to maintain a constant temperature especially during the first 24 hours of cure time. I hope this helps!
@@Artresin Okay thank you very much! How does it work if i colorize the resin? Because I read in one of your replies to someone that that could end up making the resin toxic again because of the reaction the ink has with the resin. Should i work outside then?
@@-veronika-3039 we use our own line of tints called ResinTint, they are mineral oil based so won't cause a problem when mixed with ArtResin. One tip to keep in mind when tinting your resin: not all colorants are food safe, so to be assured that your finished piece is food safe simply apply a coat of clear, un-tinted ArtResin as final coat and you will know that the surface that your foods come in contact with is indeed food safe.
@@Artresin Okay thank you so much this helps me a lot!
Hi I had a question. I was thinking for the fall and winter of working in my garage for the resin. I will be able to store the resin inside my house. But I was thinking about using and making my art pieces in the garage with the garage door open so I can try to ventilate the area. and storing them in the garage. Will this mess up the pieces my working in a cooler area and storing it there?
Great tips
I learned a lot from this video and feel that much more confident for my next project. Thank you so much for all that valuable information.
Thanks a ZILLION for this!!! It was very VERY useful since I JUST started resin and immediately faced this problem - it's winter here n it's not snowing but it's cold. VERY cold.
So thanks again 💕💕💕
so happy to help!
It's winter here in India, and the temperature drops really quick in the evening, so will a room heater do the job?
You can use a space heater, you just really want to focus on avoiding temperature fluctuations during the first 24 hours and keeping the area warm-ideally between 75-85F.
Any tips for using resin in an apartment? worried about controlling temperature
The tips for working in an apartment are the same: work in a well ventilated area and keep the room temperature warm and consistent 🙂
very helpful information. Glad to know I can still successfully use resin through the winter up here in Maine by making sure my resin and room are warm enough!
Glad you enjoyed it, Joanne!
When I first bought my Art Resin, the delivery person put in in the snow bank outside by my garage! I was waiting for it ,but they delivered sometime in the evening. The next day I got an email, that it had been delivered. So I went outside, and sure enough! There my package sit, in the snow and frozen! I was so upset, thinking it was ruined. But I wrote directly to Art Resin, and got a prompt reply. No worries. Warmed up my resin and it has worked beautifully since then!
Great Video, I do have a Question... I'm an Artist and I do really Big Pieces, ex: 4X6 and up, This next Piece I will be attempting to Resin it... Can you Please let me know, How I can successfully Pour and not get Pooling in the middle of the Canvas...The support bars behind this Piece are slanted on all 4 corners... Some say use Cardboard, some say paint on wood, but for me, that is not an option... but I'm a lil Leary about it... Any Tips or Advice would be GREAT. and so Appreciated... Thank you
This video will be of help to you:
th-cam.com/video/AJ8mrJ8WWuE/w-d-xo.html
We brace ours with both wood and cardboard to be sure the entire canvas is supported :)
Great video. What happens other way around. What if it's a hot non a.c. room, hotter than your range. Will it dipple as well or just cure slower? Too expensive to keep a.c. going 24x7 in a studio when not in it.
Humidity will be what will cause the most issues in warmer temperatures. High humidity could cause dimples or issues with curing the ideal humidity is below 50%. If your room is very warm you will likely shorten the working time of the resin and it will begin to set up a little faster.
I am pouring resin into a clear tube for a specific art project and sometimes it pulls away from the inner edge as it's curing, leaving large voids (not a bubble) I have used warm resin, but my room is cold - could that be the reason for it? Would curing on a heating mat help?
Hi Teresa, generally the cold temperature will slow down the cure, not necessarily cause the pulling away. For best results, try to keep your room between 75-85F throughout the first 24 hours of the cure time. Would you be able to send photos of the problem you are having to our support team? They can have a look and help figure out whats happening. You can email our customer service team at support@artresin.com Thanks!
Came back to say thanks again! Very helpful and answers all my questions!!
My workspace is the enclosed porch and its perfect in summer and early Fall, but now the temps are dropping, my porch is cold, I may have to close shop till the weather is better. This is my 1st year using resin. Can I use this product inside my house?
Yes, ArtResin has been evaluated by the American Society for Testing and Materials (ASTM) and has been designated non-toxic when used as directed and safe for home use in a well ventilated area! Please see our website for more information www.artresin.com/blogs/artresin/41788993-artresin-is-safe-for-home-use?_pos=1&_sid=5afcb239b&_ss=r
I got a 1 gallon bottle of resin never opened i stored it in my cabinet i went to use it for 1st time yesterday to find my part A resin has gone solid white on the bottom of the bottle do i throw it away or can it be fixed.
Try placing the bottle in a warm water bath and see if that helps.
My house stays at 69 to 70 degrees, so how long should I let it cure with the cooler temps?
what wasthe room temperature though? i live in scotland my house is 50 F Iin winter
i bought your resin just checking on room temperature first actual number?
wow 75 to 85Fis very hot for here in scotland that will cost lot of electric money to keep a room that hot
We recommend working in a warm room temperature- at least 72F, but ideally between 75-85F for best results
@@Artresin thanks so much. its going o cost me a fortune in electric
Thank you for sharing,I really wished i watched this video before starting my pour,my room is quite cold when I'm not using it,and i noticed my resin was a thick consistency.
Thank you for the tips,I'll definitely be trying them 🙂
Thanks Dee Dee, we are glad you found it helpful.
Is resin still good if the hardner has turn a brownish color?
The hardener can oxidize over time and take on a yellowish hue. For best clarity, we recommend using your ArtResin within 12 months of the date of manufacture and within 6 months after opening. The hardener will still work perfectly fine despite its colour, we just would recommend saving it for use in pours that you will be tinting or pouring over natural wood or dark backgrounds where the slight yellow wont show. Have a look at our blog for more details:
www.artresin.com/blogs/artresin/what-can-you-do-with-yellowed-hardener-and-resin?_pos=1&_sid=384bdaddc&_ss=r
Thank you, brilliant tips. Quick question, can resin alter the colour of your prints. (on canvas) I used mod podge to glue down a printed paper collage, after applying the resin some dark marks have appeared on the pictures. Could this be a resin problem or something else? Thanking you in advance for some advice.
Paper will absorb the resin and cause it to appear dark and wet. You can avoid this next time by applying a couple coats of sealer over your paper-even your Mod Podge will work, be sure to get the edges too. Use a sealer that dries clear and ensure that it is completely dry before pouring on your ArtResin.
What would you suggest for someone who needs to do resin outside because I don’t want to do it inside my house? I don’t have a garage to do it in. I have been trying to find something that is temperature adjustable that can be left outside.
Hi Re'Shell, We do not recommend using ArtResin outdoors or letting it cure outdoors for the simple reason that even the slightest dip in temperature during the first 24hrs of curing can leave you with a rippled effect, that we call the "orange peel" effect on your cured resin. The ideal temperature for working with ArtResin is between 75-85F, and for best results a consistent temperature is required during the first 24hrs of curing.
Right now I'm doing resin projects in the garage for proper ventilation (ohio) I noticed you don't wear a mask - would it be reasonable to do these in my basement instead of garage?
The ArtResin formula has no VOCs (volatile organic compounds), no fumes, and is safe for home use in a well ventilated area. It is a clean system, meaning everything in the formula reacts together, leaving nothing that can become airborne and be breathed in. If your basement is well ventilated, a respirator is not required. ArtResin has been recognized by the American Society for Testing and Materials (ASTM) as meeting safety standard D-4236: Safe for Home Use when used as directed.
@@Artresin but what about when you add colors ? Everything changes and it does become toxic
@@N0N4M30 It depends on the colourant you are using. Our ResinTints are safe and non-toxic!
Best explanations of temperature effects. 😎👍
Life saving tutorial.
Making art beautiful and saving lives....all in a days work at ArtResin! lol. Thanks for watching :)
Thanks Joanne for this video. I think realistically speaking there is going to be a fluctuation in temperature because it's the Winter. Perhaps a slight drop in a few degrees won't affect it? I would think with a cardboard covering and masking off the bottom edges would help keep the cold out.
Hey Mike - glad you enjoyed the video! I'm sure a drop of a few degrees wouldn't have an effect but resin can be a little fussy and loves warm, dry and stable conditions best :)
I was showing worst case scenario ( high to low temps ) to illustrate how important temperature stability is and what kind of an effect it can have on resin. I know a lot of customers like to place their pieces in a sunny spot to cure, but can end up with surface imperfections this way. And you're right, a nice secure cover will help keep it insulated and warm.
@@Artresin well to be honest Winter isn't the most popular season for resin making! I've worked with Artresin before, it does tend to require a longer curing time to achieve a really hard surface. But that said it's probably the best of them all if you're doing arty things and work with paints and crafts. I make skate decks and love making resin art so that's why I returned to AR for its longer work time. My order should come this week. There are resins I've worked with that can endure a minimum of around 18°C and cure pretty hard under 24hrs. But these are woodworking resins which don't require the aesthetics as yours does.
Hey thanks for the tip but if we use cold resin how much time it will take to cure?
We recommend working in a temperature of at least 75F. Colder temperatures will cause the resin to cure slower, I can't give you an exact time.
Can you bring your resin when poured in the house if you seal it in a plastic container. I’m worried I only have a shed to work in but at night in the winter it will drop. Can’t do it in the house as the fumes and I have cats. I’m worried I will not be able to make my stuff as in the uk the temperature always drops at night any suggestions please
Yes you can. ArtResin is non toxic and does not produce harmful fumes-it is safe for home use when used as directed in a well ventilated area. Once your resin has started to cure, you want to avoid moving it around as the movement can cause imperfections in the surface. You also want to avoid temperature fluctuations especially within the first 24 hours of cure time.
Hey so I'm interested in doing this and was wondering if I could get the same effect with epoxy resin you can buy from rona ??!!
You will want to check with the manufacturer of that exact product to be sure. Our product can be found at www.artresin.ca :)
Hey, can warming resin reduce the life of molds? Can heat affect the molds?
excessive heat, like that from the flame of a torch can damage the silicone mold and cause your resin to stick and mold to tear. Its recommended to avoid using a torch with a silicone mold.
@@Artresin thanks a lot but does warming resin also affect molds?
@@divyasonkar7563 the warmth of your resin should not damage the mold.
I poured about 1/2 inch thick of resin in a fish bowl and overnight left it in a cold garage, in the morning all of it had evaporated, is it the cold that causes this?
Hi Lauren, Cold weather does not cause evaporation of ArtResin, the cold temperature will make your ArtResin thicker and may cause it to cure slower.
question do u need to wear a mask and googles while mixing the harderner and resin?
Hi Alec, ArtResin is non-toxic and safe for home use, when used as directed. So, that means when you work in a well ventilated area, you are not required to wear a respirator. Here is a link to our blog on what safety precautions you should take while using ArtResin: www.artresin.com/blogs/artresin/what-safety-precautions-should-i-take-when-using-artresin?_pos=3&_sid=beb61d212&_ss=r
i gave up on trying to get my statues like shinny glass on the outside with resin ...theres always an issue... instead i coat, sand smooth and paint... once i setup a nice paint station i may just finish them with auto paint and clear.. resin hides most of 3d lines and adds strength... uv resin is kinda costly so i will still use 2 part which i think is stronger.. thanks for all your tips..
Thank you for this informative video... I just wanted to know that how can I clean my silicon measuring cup or any other plastic cup or glass
Glad you enjoyed it! We have how to clean your tools lined up for a future video but here are a couple of options: you can wipe out any excess resin with paper towel, then spritz the measuring cup with isopropyl alcohol to break down any remaining resin residue. Wipe it out and repeat this step as many times as necessary. Once all the residue is gone, then you can wash your measuring cup in hot soapy water. Whatever you do, don't pour any resin down the drain. The second option is to leave your tools on a plastic surface ( turn the measuring cup upside down so that the resin all pools out onto your plastic lined work surface ) and let the resin dry .. the next day, simply peel the resin out.
@@Artresin thank you so much for replying me, it is really helpful tip, I'll use it definitely
at about 12mins, you say to re pour if after another 24 hrs it hasn't cured and still sticky. Do you mean to mix another batch and re pour onto the same sticky surface? Or start a new project all together?
Hi Laura - if it is still sticky after 24 hours you can mix and pour another batch right on top :) Here is one of our blogs on sticky resin that may be of help: www.artresin.com/blogs/artresin/oh-sh-t-series-episode-1-sticky
My apartment doesn't have heat. Is 55 fahrenheit warm enough?
We recommend working in temperatures between 75-85F. If your space is too cold, the resin may not cure.
You solved my problem. Thank you so much
Thank you for sharing!
Nice imformation..thans..i am biginer i was going to start this rezin art .i like too much..but i was gathering the imformetion..thanks again..i get a clue..for cold wether....very important..for me
Thought this was a great informative video but I do have a couple of questions. Can Art Resin be frozen (left out by delivery man etc), thawed out, brought to room temp and still be usable? If you use plastic measuring cups will the dried resin be able to be pulled out of them (assuming you have drained them while still wet)?
Yes and your thought process is exactly right, the product will just need to be brought back up to room temperature and thawed out and it will be good to go. As far as your measuring cups we like to wipe them out with a paper towel and some denatured alcohol to remove the little bit of excess resin and then they are good to be reused on your next project :)
great tips! question: if your second example (the black surfaces) get reheated with a torch will that help get rid of the dimpling? and then continue curing at room temp?
Hi Ro - great question! The black pieces, all 3 of them, did end up curing dry to the touch so for best results, a sand down and repour of ArtResin would be the way to go. If the resin was still tacky ( ie not fully cured ) it would definitely be worth a shot with a heat gun or even a hair dryer. I wouldn't use a torch - the flame would be too intense and you'd likely scorch your resin.
I started getting stretch marks during the curing and I put a heat gun to my peace and it got rid of it
Can you please tell me why are you taking 3oz of resin and hardener...i mean hardener should always be half of resin na..?????...please please tell me
ArtResin is measured in a 1:1 ratio, so be sure to measure an equal part resin and hardener by volume every time. Not all epoxy resin is measured the same, so be sure to follow the instructions for the brand you are using.
I really love the glass like finish I get from Art Resin but I do struggle with runs down the side of dotted mandala stones.
I resin the bottom half of the precast stone first, let it dry and cure, then do the same to the top half. As I mentioned I nearly always get runs down the side which for me, really spoils an otherwise perfect finish. Do you have any help or advice to offer at all please?
Hi Mike,
I am unsure of your process but I would try to brush on very thin coats. Maybe even letting the resin sit for 15-20 minutes before coating so that it does begin to thicken up a bit.
Hope that helps :)
Thank you for the help, I'll give it a try.
Can I keep resin under sun to cure in winter ?
We recommend letting ArtResin cure in a room with a temperature of approximately 75-85F. You will want to avoid temperature fluctuations within the first 24 hours, for this reason, setting your curing resin in a sunny window would not be the best option.
Very well explained... thank you!
thank you why are you not wearing any protective gear asided gloves?
Hi Picco,
We are happy to tell you that ArtResin is non-toxic, produces no fumes or VOC's and is safe for home use when used as directed. So, when you use ArtResin in a well ventilated area, there is no need to use a respirator. Here is a link to tell you more about how to work safely with ArtResin: www.artresin.com/blogs/artresin/what-safety-precautions-should-i-take-when-using-artresin?_pos=3&_sid=4d854de57&_ss=r
@@Artresin thank you. I will check it out.
Interesting, I live on the east coast and it gets cold, but then again the temperature can vary in any location in North America. Keeping my space at 24 C will be expensive and difficult.
What was the temperature in the garage?
What was the temperature in the studio?
Hi Alan - these are excellent questions - you're right, I should have included them in the video!
We are just outside Toronto and we filmed last week. The studio was about 75F/24C when we filmed and the garage was as cold as it was outside - so a few degrees above 32F/0C in the day and then dropped below 0C overnight. I wouldn't go below 72F/22C and I think the key is to keep the temperature stable, otherwise you may end up with surface imperfections. Resin can be a little fussy and definitely loves warm temperatures best.
Does resin heat up when you mix them together
When the resin and hardener are mixed, it will begin to build up some heat but does not become hot to the touch when used as directed. Here is a link to one of our blogs on this topic: www.artresin.com/blogs/artresin/why-does-my-epoxy-resin-feel-hot
Is there any other way to get rid of bubbles than using the torch?
The torch is the fastest and most effective way to remove bubbles. Have a look at this video where we compare different methods: th-cam.com/video/IIAM-U5lhQI/w-d-xo.html
Shoot, my shop in Colorado is not insulated and very difficult to keep warm. I’m beginning to think I may have to put all of my resin/finish work on hold for the next six months or more. Thanks for the tips though!
Thanks for watching :)
Thankyou for sharing such an amazing tip. I had a query when I put the final layer of the resin on my work at the time of curing I begin to see it wrinkling, could you tell me the reason behind this and how can I fix this?
Hi Deirdre, make sure that there is no vent or air blowing on your resin surface, do not move your artwork and be sure to avoid temperature fluctuations while curing. Over torching can also cause ripples in the surface. If you still have problems, reach out to us at support@artresin.com
Very informative , thank you
Interesting information. Thank you. What about humid weather?
Great question! The ideal humidity is 50%, but anything less than 85% humidity will be fine :)
Thank you ☺️
Does anyone know how well resin holds up to cold? By that I mean once cured (in normal conditions) if I wanted to say run a cooling pipe in the piece of resin would it work?
Hi James, We haven't tested this exact thing but we do know that once fully cured and used as directed it does well in cold weather. We have had outdoor pieces last through the Canadian winter with no issues. If you are able to test on a non masterpiece I would recommend doing so.
is this the reason that my pours are coming out cloudy and dull??
It could be! Check that micro bubbles are not making your resin look white and milky. If so, use a warm water bath to help clear them out. If your finish is cloudy and dull it could also be a result of too much moisture or humidity. Double check the humidity in your workspace and ensure that you never let any moisture get into your resin mixture.
Hello my resin art pieces had wrinkle type lines on it. How to avoid it? I heated the bottles in warm water before starting to pour.
Hi Aiman, wrinkles in your cured resin can happen for a couple of different reasons. First, if there is a dip in temperature during the first 24hrs of curing this can cause what we call the "orange peel" effect, or as you said wrinkles in your cured resin. A constant temperature is needed during the first 24hrs of curing for best results. Second, wrinkles can also be the result of over torching. The good news is that we can make those wrinkles disappear with some sanding and a second coat of ArtResin :) Please visit our website for details www.artresin.com/blogs/artresin/44594177-how-to-apply-a-second-coat?_pos=2&_sid=85efef3c7&_ss=r
@@Artresin hey I don’t over torch it. I use a heat gun and use it only once after pouring. And I live where the temperature is 16-10•c. I warm the room and resin. But still had those lines. And I even sand my resin art piece and poured a next layer but still have them
@@aimanabbas4261 Hi Aiman, sorry to hear you are having issues with your resin cure. Please reach out to our customer service team at support@artresin.com and include any pictures you might have. They will be better able to help you.
@@Artresin sure Thankyou. Will post my concern there
@@Artresin how to post my concern? Couldn’t find your customer service team
i live in Australia. temp. in winter is 16degrees during day and 6 degrees or less at night. This is my dilema .( No central heating except a gas heater.)
Using a space heater in the room where you plan to use your ArtResin can help. The ideal temperature is 24-30C, so try to get at least close to 22/24C if possible. Keeping a steady temperature for the first 24 hours is important to avoid any surface imperfections.
Please can someone tell me if the room temperature has an effect on shine?
Fluctuations in temperature during your cure can have an affect on the finish, mostly causing a rippling effect or "orange peel" effect, but doesn't necessarily affect the glossy shine. Too much humidity in the air can affect the shine by leaving a hazy or cloudy surface finish sometimes.
@@Artresin you do a wonderful work thanks for all ❤
Whre cure the resin
does cold resin causes stick surface after curing ?
Cold temperatures can slow down the curing process. We recommend allowing your ArtResin to cure in a warm room (75-85F) for best results. If you have resin that is slow to cure, try warming up your room a bit. If your resin remains sticky, it could be that your mixture was off and you may need to re-pour a second layer to fix.
@@Artresin I did mix it very well for like 3 min but the resin was cold and thick.
also, every time I put a cup or something heavy it leaves a mark on the surface of the tray/coaster what did I do wrong?
@@nleiwk6945 we would be happy to trouble shoot this with you. Please contact us at support@artresin.com and we can ask you some more questions. 🙂
Thank u for your timely reply!
wish i knew this before i spent 500 uk pounds on supplies to make resin items
this is going to be expensive for electic doing this in a cold country
Very helpful.
I have heard there r some types of resin that u can use without wearing a respirator, what about this brand?
Hi Jane - ArtResin has been evaluated by toxicologists at the American Society for Testing and Materials (ASTM)
and has been designated non-toxic when used as directed and safe for home use in a well ventilated area. If you've added colorants/additions that may be toxic or that contain solvents ( such as alcohol ink ) then a respirator is recommended.
I put the bottles in a plastic bag before placing them in the waterbath, this saves the label, and avoids water contact.
That is a great idea!!
th-cam.com/users/shortsajwKZGt5pxo?feature=shared
Thank you. This is great information. I do have one question, though. I live in Arizona, so how does extreme heat affect the outcome of resin?
ArtResin is heat resistant to 120 degrees F. So those hot summer days, if left outside or in direct sunlight could soften the resin some but when brought back down in temperature it will harden right back up.
One of the most important factors to ensure your epoxy resin cures properly is temperature. The ideal temperature for both your ArtResin and your workspace is slightly warmer than room temperature: 75-85F or 24-30C.
You also want it to be dry, 50% humidity is ideal and stable meaning no dips in temperature during the first 24hrs.
Hi I just wanted to know where can I get a torch and the resin mix because I AM TRYING TO MAKE A WHITE MARBLE CROSS WITH LIGHTS AND GOLD GLITTER FOR MY MOM WHO PASSED AWAY LAST YEAR O HOW I MISS MY MOM SOOOOOOOOOO VERY MUCH AND I JUST WANTED TO KNOW IF I MIXED THE WHITE MARBLE ROCKS AND GOLD GLITTER ALL TOGETHER AND POUR IT ALL TOGETHER AND THEN POUR IT ALL INTO A CROSS SHAPE MOLD THEN LET IT SET AND WHEN FINISHED COULD IT WITH STAND THE WEATHER BECAUSE I WANT TO MAKE IT FOR MY MOM HEAD STONE THAT'S WHY I AM ASKING JUST WANTED TO KNOW IF THIS WILL WORK THANKS FOR SHARING AND THANKS FOR YOUR TIME AND HELP THANKS AGAIN GOD BLESS YOU AND YOUR FAMILY ETERNALLY IN JESUS NAME AMEN N AMEN HALLELUJAH AMEN THANKS AGAIN GOD BLESS
So sorry for your loss Grace. What a sweet project you have in mind.
It is important to note that once cured, ArtResin is weather resistant and waterproof and while many artist do use it for outdoor pieces we still don't recommend that you put it outside.
With its advanced UV and Hindered Amine Light Stabilizers, ArtResin is chemically engineered to offer the best protection against yellowing on the market. Even so, it doesn't make sense to deliberately put your artwork in an environment full of UV rays - it makes it much harder for ArtResin's UV stabilization to do its job :)