Taranis QX7 and TBS Crossfire Telemetry Fix
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- DO THIS MOD AT YOUR OWN RISK!!
Link to the info on TBS
team-blacksheep...
Link to the Inverter:
www.digikey.co...
TBS Crossfire TX: amzn.to/2wncUBh
TBS Crossfire Micro TX: amzn.to/2wm0Ikp
TBS Crossfire Micro TX bundle: amzn.to/2jyH1zu
TBS Crossfire Micro RX V2: amzn.to/2hakEvQ
FrSky Taranis Q X7: amzn.to/2jAVECw
Frame: The Xhover Stingy
Xhover 2206 2420kv motors xhover.com/col...
Betaflight F3: us.fpvmodel.com...
DYS XSD30 amzn.to/2xLITIg
Runcam Swift with 2.1mm lens amzn.to/2gN8k3n
HQ 5x4.3x3 V1S PC version
Antennas - TBS Triumph amzn.to/2hgEW64
Venom 1300mah 4s 75c: amzn.to/2jE9vGq
GoPro Hero 5 Session: amzn.to/2hjJHML
Video Reciever Laforge: amzn.to/2ht3Enp
Frsky XSR: amzn.to/2iHEe1n
Fatshark HDV3 amzn.to/2hrlvdV
VTX TBS Unify HV: amzn.to/2pZnpHF
Gear
Evolve Carbon GT AT: evolveskateboa...
Wireless BeatsX headphones: amzn.to/2mZgIQK
Sony RX 100 V amzn.to/2htiUk8
Jobi tripod: amzn.to/2hLFmkn
Bag: www.rei.com/pr...
Speaker: Braven BRV X amzn.to/2h3wLui
Chair: www.rei.com/pr...
Battery Pack: Anker Powercore + amzn.to/2h4xG06
Lipo Checker: amzn.to/2h3wlUG
USB and USB-C SD card reader: amzn.to/2h4q7qi
flashlight: amzn.to/2htld38
Solid state drive: amzn.to/2h0I7il
GoPro Lens Protector: amzn.to/2h3wszz
XT60 to USB: amzn.to/2h4xZYE
Immersionrc Tramp: www.readymader...
Tiny Whoop Case: 3dprintyourlife...
Laforge RX: ubuyadrone.com/...
8dbi antenna: amzn.to/2h4zczi
Mad mushroom antenna: amzn.to/2h0Mdqw
Soldering Iron: amzn.to/2huY0y3
Taranis Case: amzn.to/2h0MMAE
Taranis: amzn.to/2h3tz1L
Venom 1300mah 4s 75c www.venompower...
Macbook sleeve: amzn.to/2g7GNNU
Macbook: amzn.to/2hLGGUH
Wich thumbpads you got?! I got crappy ones. Hope you can help me out
FrSky sent Steele several to try out. Those are a set he didn't like because he pinches but work perfect for me as a thumb flyer. They are FrSky Grand Lotus stick ends.
I've tried those m4 ones but they won't fit on stock QX7 (M3). I think I would have to upgrade to M7 hall sensor gimbals for those to work? Not sure, because I don't own them...wild willy guessing because I'm lazy.........any*dolphin sound*way I'm stuck with NJ Tech guess for umbrella style thumbpads, wich kinda suck. So, them FrSky people should be there for them stock folks too :P Get Schwifty -.-
+Beaux FPV yeah I have the m7 gimbals too.
the grand lotus ones are so much win.
I dunno why I got them. I'm a pincher and hate them. Have the m7 gimbals also so have to use the m4 size stick ends. Can't really find good ones for pinchers.
Hi Kevin, super nice that you showed my mod! Nice video to! I've been using my modified setup now for a couple of weeks and it worked super solid. Thx
Aye bro. Your radio dun talked some
.
Lol
"I'm not a technical guy" said the commercial pilot! lol. Stingy you crack me up :) Great video sir, thanks for sharing!
Crossfire is amazing! I'm glad I'm using the X9D+, I'm a new convert to crossfire and honestly don't know how I've gone without it so long.
Did the mod this weekend, lifted the pad on the main board by accident.. Wire was still soldered so i hot glued it all down, works a treat. Took hours to clear the arm flags though. Now im trying to solve the way delayed telemetry lost warning that comes ten seconds after I've unplugged
Hi Kevin
This video convinced me that a qx7 is worth getting. Doing the crossfire mod was putting me off. Your positive attitude and the convincing yourself you could do it was great to watch. So glad ive finally got one did the mod yesterday no dramas so far.
Thanks for a great video.
Invest in a hot air rework station ;)
Also a good idea to clean all that with some IPA (isopropyl alcohol) so that the flux/rosin won't corrode your joints
Only true if using type 'R' rosin. 'RA' and 'RMA' which are more common aren't corrosive. th-cam.com/video/KPbozW0Y3p4/w-d-xo.htmlm0s
when trying to remove components use flux it will help the solder flow and protect the components around it.
K dawg, thanks for putting this together... man... what a gawdamm hassle... i plunk hundreds of dollars down trying to put together a long range system, and this is the end game to get it to actually work?!... uggg. I'm stuck in the mud on this one. might have to just wait for a legit fix to come out...
Good to see you again Kevin, missed your videos!!
34678, got a QX7 on the way....already have the gimbals, so this mod should FUTURE PROOF my radio completely :P
Nice viddy!
34678. I just ordered my crossfire and was just going to do the firmware upgrade but would much rather get the full fix. Thanks for the video brother! Keep up the good work!
Great video and editing! I love the commentary over the fastforward video. Should be done in tutorials more often.
Thanks allot for this dude, I just modded mine and it works... What's interesting is that it came in the box of my crossfire nano receiver.
So, the only issue with the way you removed the inverter was that you could have de-padded the board. However, this is an awesome tutorial!
I literally just de-padded one of the pads that you use for this mod and now I don't now what to do hahahahaha
Kevin if I'm correct the yellow wire that solders to the 3 pins isn't that the 3 pins that are located on the bottom of the qx7 an not the rear I'm pretty sure that's the 3 pins that are located in the port on the bottom where USB plugs in
NC of course is Not Connected 😂. Nice vid!
No Connection lol
Just done it 😂 Thanks for this video mate. Just what I needed :) helped me get mine done 👍
Hi...Sir...thanks this is very good video....and detail. What a good news nowadays.... "telemetry warning" for QX7 not only impact to crossfire but R XSR also had problem too (at their own rx too 😂 ). Telemetry lost...tele..recover... Always repeating OMG. I suggest Taranis should improve their radio too. This impact their own rx actually.
Its now 2021 and FRSKY is still shipping these radios without the fix. to add to that they have a their version of openTX that wont allow crossfire. The TBS tracer pack comes with the inverter on a PCB now so its a little easier to do and a quick firmware update gets rid of their gagged version.
Hi Kevin,
Question on qx7 + micro crossfire.
If you don't need telemetry feedback to radio do I still need this mod?
The only thing I really want just rssi feedback, and all these lua script functions and rssi feedback can display in my osd so if I can disable the telemetry feedback to radio would that cause any issue?
+Zen Dumbo I tried that but the radio still won't shut up. I was going to just turn down the volume but then I don't get my timer alarms so I went with the mod. It is actually a lot easier than I expected.
StingersSwarm understand.. Amber can't be dismissed.. 😂
Was checking would that really affect on the radio links or just telemetry freak out..
Hi, I managed to knock off the resistor that’s right above where you solder the ground wire on the taranis. It’s the R104 one. It’s so small I lost it when it got removed. Any idea on what I could to to fix this?
Its a single gate inverter. The NC pin is Not Connected to anything. So you could use that pin to help secure the IC to the board by soldering it to something.
the fact you wernt 100% confident in doing this has made me more confident to try it....am I broken?
i would use the wires from inside a cat5 cable and i would also use bluetac to hold the chip. also when remove the componet just add a bit of solder and it will come of easer.
ERRRR! Bad dream.... This should NOT be happening. Comon Frsky what's going on here. Can't believe I just watched this video! You don't want people damaging their radios in trying to fix them. Thanks for posting this. What a pain.... XFire should just be part of the radio built in. This mod is exposing a manufacturing error as XFire bundle deal is supposed to PNP with the QX7.
First, good video, hopefully those willing to try this can fix their issues with the Qx7. Second, you mentioned updating your XSR's firmware, what did you update them with? What was the "update" addressing? Thanks in advance man!
Nice job...Just did the mod last week got my inverter from Amazon.
Nice, it wasn't as hard as I was expecting it to be honestly.
Yeah I agree once you have the wires all patched onto the inverter it's a piece of cake.
That looked HORRIBLE without the break out board bro ! -- Just did this again on my QX7s after doing my QX7. The 7s wouldn't take solder on that Power and ground but there are little pin holes next to the capacitor labeled ground and 3.3 Volt.. VERY Upsetting... About to switch over the XFire and test my work if I can do this anyone can.. Was scared I burnt the board trying to get those +/- wires to stay on the board.. Oh I hot glued my connections, shrink wrapped the break out board ( AGAIN )
KRAP !!! Im going back in This Time I'm using those Pin Holes for Power and ground
Grrrrrrrr !!! UPDATE For Interested parties Those Pin holes next to the capacitor
are more than adequate connections instead of trying to mount Power and Ground on the damn capacitor
I'm all good in my second time doing this QX7 & QX7s Whoo hoo.. Now do I sell my QX7 ?
Nice, I did the resistor mod and everything working for me except I have to go lower baudrate to change settings but then I can go back to 400k and fly and its all good :)
34678. Your totally awesome. I've had this issue to just turned off telemetry. Really stoked to see this. Thanks
Good to know, I'll be upgrading to crossfire as soon as I have the funds. I hope this isn't an issue with my Q X7 lol. This doesn't look fun. haha
I have a question. When u look at the inverter and the arms are pointing downwards...am i looking at it from a top view? If i have done the soldering right..im getting signal between Y and GND. Output/ground.
Why is this not a factory defect lol? I would think Frsky making a transmitter to accept different modules and not working properly with the most popular tbs crossfire would be a pretty bad screw up on Frsky?
Its good stuff . Love the how-to vids too .
Hey Kevin, I just bought a Q X7, Im thinking of getting a Crossfire. All of these radios need this mod in order to worK?
Some of the early Qx7 didn’t have this issue? How would I know, I got mine when they first came out and I just got the tbs micro bundle. Great video as well.
hey is there still a need to update the firmware on the transmitter even after doing this mod? because i know that the updating the firmware is another potential way to fixing this issue, but after installing this hardware mod is there even a need?
what in the - ive never seen you without a beard and hat... never knew you were a cop that flys drones , bearded man must be your protected identity
cop? i thought he was a commercial pilot
@@exshenanigan2333 commerical pilot for the new bradpitt action movie haha
Thanks Kevin! This was a huge help.
Is this still relevant in 2021. I’m having the same issues with my qx7 and crossfire. Any new fixes?
For anyone watching this video and installing the TBS breakout board. You want to solder q400 (single right pin) to the IN and the S-port to the OUT
Why do you say that, the diagram on tbs site shows it the other way?
Just did the mod. Thanks dude!!!
So after doing this mod my x7 started turning off after a few minutes..... before you fly it leave your radio on for at least 20 minutes but try and do it a few times. Mine started turning off around 3-8 minutes. Checked all my solder joints and such now it's hard to have faith my remote won't turn off during a flight
Nice video tutorial! Thanks Stingy! :)
But I have one question... If I do this mod to my QX7, will I be then able to use stock internal transmitting module? Will my tiny whoops, 2inches and other quads with FrSky receivers still work with QX7 modded like this?
I guess when I remove the crossfire module then it should work... Or is there something else required to do in order make internal module work again? Please correct me if I'm wrong :)
I just started to getting information about crossfire, so I just want to be sure before I buys it and mod my radio :)
you setup different models for your FrSky RX quads than your crossfire within your radio.
Ok so how will this mod affect my radios ability to bind to non-Crossfire receivers like on my tiny whoop?
My xm plus receivers don't put out rssi and i have tried to discover new sensor's and rssi is showing - - - -!! Should i update the receivers? Thanks!!
I like the video, it's how you learn and make others learn. Thanks.
Actually I bought a barely new QX7 , it brings me to your video. Doing my crossfire 34678. Thanks
Has anybody tested the "Softwaremod"? Is there an noticable difference?
I just ordered the TBS Crossfire Micro bundle. Is there anything else I need to complete the setup? (for example any additional antennas?) thanks
for stuff like this i would try enamel coated copper wire, its a lot easier to work with at these sizes
Hi,
One question, is the radio still usable with the internal radio and the frsky receivers with this hack? Or once the inverter is installed only the crossfire would be functional?
Thanks
+Christian Cardona Yep it still works just fine with my FrSky RX's and internal module.
StingersSwarm great! Thanks for the answer 👍
i have qx7 nwu model orange one, summer 2018 model .you think if the problem is solved for this model until now?
Can I install "TBS crossfire" on FlySky FS-TH9X 2.4G 9CH Radio?
MrNams ummmm that’s really old. It does support opentx and has a module bay. So I think it might. I’ve never tried using one of those though.
@@stingersswarm Thanks
Any chance Taranis will fix this in the future? I have a Turnigy Evolution.... which works great.... but I wanted to go longer distance so was thinking of switching to Taranis and CrossFire..... but alas these are several complex steps too many now! "This is a project beyond anything I've done before" kind of settled it for me! I'd probably break a ribbon cable. I doubt I can successful take out that litte inverter Q400.
The mod is on the package when you buy crossfire JR?
did you experience any crossfire glitches/short rc signal drops?
What kick stand and thumb sticks are you running on your QX7?
You said the early ones didn't have that issue? 34678 by the please ship me the inverters.
Hey Kevin I have a Gens Ace 2 cell 3000mAh in my QX& but its a horrible fit. I have an extra that doesn't fit period. What do you use?
Thanks for the vid!! This helped my setup!🤙 love the channy
How does this mod affect using other modules with the QX7s?
Hola, tengo el mismo problema pero en la Taranis X9D plus, sabes si se podria usar el mismo procedimiento que recomiendas?
I am thinking about getting the qx7s. Does the qx7s need this mod if i was going to use crossfire
Great vid stingy🙌🏻 Na I'm good with my qx7 9dbi modd maybe if I could get video to go farther I will try it lol.
Does the qx7s have the same issue as the qx7?
How do I get rssi telemetry to show up in my osd? Do I need the core just for that? I'm using an X9D with crossfire and the micro receiver.
I have this same problem! 34678 would definitely fix that 😎
Will this mod also fix the X10S with CRSF compatibility issue?
thank you very much for this useful sharing ❤️🍻
Is this for the qx7 and qx7s or just the qx7?
hello thanks for the video , its modification of the radio signal reception? it's just for telemetry?
Hi stinger, After doing this mod.. Can I still use my frsky receivers?.. Thanks!
Any idea if this is an issue with the qx7s?
how can i get all of telemetry data from betaflight to my taranis?
Hi my name is Angel I've been trying to get a taranis Q7 converter do you have one you could tell me I really appreciate it if you do
Solved mine with the hardware (inverter) mod :)
Great video. Do you know if this works with the Horus X12?
Thanks, got mine done too.
NC just means not connected. Alot if people use the same case for different parts cause it's cheep to manufacture so many terminals end up nc
Thank you Kevin!
I get this telemetry warning even just with my xsr. I did a mod on the xsr to get telemetry sent to my Qx7. But it doesn't stop the warning. It's only when it's close to quad. Is there a fix just using xsr?
ChristianP1973 thank you. Is it still a bug on my xsr. Need to update xsr?
Awesome tutral but im thinking the Tango or X9D is looking real good to me right now...lol The L1 mod for my Fatshark goggles to power my Rapidfire was nerve racking enough..lol
Officer Dougherty
hello my friend. may i ask question.
after i mod that chip. can i still conect to receiver frsky like normal?
It'll still work just fine.
Thanks my friend 👍
Was also curious about that
I'm interested that a bunch of "you guys" seem to be switching back to CrossFire recently. Curious what has changed. I love my CrossFire but I know you ATL guys had stopped using it because there was a specific issue (the radio tower of death) that was making it unusable.
tbs released a new software protocol called CRFS that has lower latency, thats what the newfound hype is about.
The noise floor may not have been the issue after all. We may have just been on a bad firmware release. It could've been so many things. I want it to be good. I'm hoping I have better luck this time around.
I just always get the "waiting for crossfire device" message whenever I try to run the script. I did the inverter mod but get the same issue. Updated opentx, updated crossfire firmware
The crossfire powers on but won't seem to actually connect with the radio. I've redone the inverter mod also. Could it be the mod or is it software? I didn't think the mod had to do with the connection but with it just working properly...
Appreciate any advice!
I have the same problem...
Let me know if you figure it out. I'll do the same. For now my plan is to buy a new radio haha
I have just solved it!!!!!!!!!!!!!!! you need to install the firmware team-blacksheep.freshdesk.com/helpdesk/attachments/4043179578 and in the MAIN MENU, go to page hardware and set the baudrate to 115200. After this, the "waiting for crossfire device" dissapears and you can configure it!!!!! YOU'RE WELCOME!! ;D
THANKYOU!!!!!! I'll do this today
ahh! still no luck yet! going to try updating crossfire firmware again. I undid the mod with same results...
34678 !!! :) I'm waiting for my crossfire, and just realize that my X7 won't work without this inverter :/
Would love to get that inverter from you ! (I'm in France tho ! Would you?)
Thanks for that tutorial video anyway !
Nice Video, Thanks. I did removed it the same destroying way :)))
Does doing this mod limit your qx7 to only use the external receiver module? Or can you still connect to standard x4r's for example?
Nope the internal module still works just fine.
Will you do a video of binding the crossfire with a QX7? Everyone on youtube uses lua scripts for binding which aren't available on qx7. I can't get mine connected.
I use this one, ohmeye.com/download/debug/X7_CROSSFIRE.zip
Thanks very helpful video
Thanks for a good vid!
Is it possible to tell if my radio would need this? Just check to see if my inverter is that model? I want to run crossfire. Thanks for the awesome help. I love the whole not sure about NC but doesn't matter, "it's NOT CONNECTED anyway" So funny a
Ao 34678 could really use +fire.good lookin out!
Can’t get my QX7 to work even after doing the mod, it’s stuck on “waiting for crossfire”; I have the latest crossfire firmware as well as OPen TX 2.2.2... haven’t been able to get past that... any help will be appreciated... thanks in advance! 🐸
Did you ever fix this
will TBS be addressing this issue somehow by changing the crossfire in a new Rev? , or will this be up to Taranis to change?
It is a taranis issue.
The crossfire antenna on your Taranis should be vertical instead of horizontal for best performance.
I knows.
StingersSwarm 👍
Glad to see you're making videos again.
Actually not when using the immortal t antenna
Phat Kid you know the immortal t antenna is same as the antenna that comes with the micro rx... just more rigid.
In the institutions it says to always mount vertical.
Hello. Can you explain how to power up crossfire through external dc? For using 2w power on crossfire it ask to use external power port instead of powering through taranis. Question is, can i power it up with external dc port while it powered up with with taranis?
Yep just plug in a 3s battery on the xt30 port. Good to go.
Thank you very much!)