#IH1086

kit: a-pck721 includes 68803C91 & 77721C91
PTO Clutch & Seal Kit: amzn.to/3xN1wwt
Led lights: amzn.to/3zF8wNl
Bearing driver set: amzn.to/3xqxhdo
Filmed on GoPro Hero 7 Black
My Gear...
Camera: amzn.to/39kQTno
Case: amzn.to/35y8w1I
Rode Wireless GO II: amzn.to/3sQCzdS
External Mic: amzn.to/2LKxCUk
Mic Adapter Cage: amzn.to/3buVypy
contact me
Facebook: groups/42350...
Email: [e-mail]

[@dalekerr1291]

I think you forgot the small o rings on the pto brakes.

[@AndyFromm]

I really appreciate you pointing that out, I can't believe I missed that 😬.
Atleast nothing got filled with oil yet.

[@timdyer6196]

I enjoyed it great job nice work space with the parts washer up higher saves your back

[@AndyFromm]

I really like it
Thanks Tim 👍

[@RuralMidwest]

Great video and a great resource, thank you.

[@AndyFromm]

Thanks for the comment, I appreciate it 👍

[@bertvisser6423]

slow but steady is making you faster then most.

[@AndyFromm]

Thanks Bert 👍

[@schm2918]

Great video! Thank you. We've consulted this about a dozen times

[@AndyFromm]

Thanks 👍
Just don't forget the o-rings on the brakes like I did 😟

[@schm2918]

@@AndyFromm I already had swapped those out before I tuned in, no worries! But I will be pulling my clutch packs back out to oil them... whoops.

[@AndyFromm]

@@schm2918 I'm not sure if it would hurt it not oiling them if you take it easy testing it. They should get oil sitting in the tractor I'd think but It sure wouldn't hurt to oil them.

[@elroyelblander6277]

👍👍...the 2nd to the last time I did it,it burnt up prematurely....had to find the correct,boss adapter for the port there...found that pressure was low ..end up trimming some off the top nut on the spool there to get more adjustment...raised the pressure... anyway.. good stuff man 👍

[@AndyFromm]

Good thing you got it figured out, I'll keep that in mind when I check pressure.
Thanks Elroy 👍

[@DDFarmsWWtx]

Great video, about to tackle this on an 806 myself.

[@AndyFromm]

Thanks, don't forget the brake orings like I did 😪

[@stephenhoogland3727]

Very nice video. I have two questions for you. What pressure should the pto clutch be set to if i replaced all the discs? Second, what happens if the input shaft gets pushed forward like mentioned in the video at 35:50?

[@AndyFromm]

Online fourms say higher than the book at about 245 psi.
If it gets pushed ahead, it breaks a cast bearing retainer in the bellhousing. I have a 806 video about that cause I did it.

[@r.hazelwood4885]

I soaked the disc in hyd oil. Worked the same...

[@r.hazelwood4885]

Didn't take the top link off.. that's a great idea!!

[@AndyFromm]

Soaking them would be best.
I didn't take off top link on my 806 and I busted the front bearing cap.
Thanks Mr H

[@reiniervanderheijden1260]

i have to replace the 540 seal on my farmall 826, it seems like its not going to be an ''easy seal'' lol

[@AndyFromm]

Might be the time to rebuild it if it needs it 👍

[@billjohnson2462]

what were the hole centers on that press piece you made for reassembly? Great video!

[@AndyFromm]

Check this out.
th-cam.com/video/lqeuVlMrYBg/w-d-xo.html

[@user-ni5zp3wq5q]

Can you take it apart and replace the 540 shaft without taking the whole clutch apart?

[@AndyFromm]

I don't think I've tried it.
It may be possible but the spring brakes might put a lot of pressure on the case.
Might be able to use some threaded rod, washers, & nuts to open it up.

[@user-tk9ol6yt3v]

If I just want to change the 540 shaft can I just pull back cover?

[@AndyFromm]

Starting at 13:00 or so, you'll see some clips on the shafts and bearings so I don't think it would work.

[@michaelhuffer9966]

Your video is not the best, I h delight is a better video to work on tractor, he's fast and lots of knowledge. 😅😅😅😢😮

[@AndyFromm]

@@michaelhuffer9966 that fine, I never said I was good at this 👍