Carprog Clone full Rework. Reflash ,Reprograming and Repair. Reflash CARPROG MCU AT91SAM7S256
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Carprog Clone full Rework. Reflash ,Reprograming and Repair. Reflash CARPROG MCU AT91SAM7S256
If you need Help, don't post your personal addresses on youtube.
you have my contact address -- yoyo.pc86@gmail.com ---
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
Hi I’d just like to say I followed your tutorial to rework my carprog ,and what a helpful and informative guy you are.
It’s not often you come across someone who goes out of there way , and give up their time to help you .
You’ve got a subscriber as long as your still on here ,and to anyone who does this rework,if you find you have problems reading or connecting,
check your leads in your plugs are connected correctly as I had 2 wires wrong on my A8 lead .
Thanks again
Thank you for subscribing.
I try to help everyone who asks for help and appreciates this channel.
I'm glad I was helpful.
@@YOYODiagnostichi I have a new cluster dashboard Siemens Vdo for golf 5 but carprog don’t give me a PIN code to reconfige this with immobilizer. Can you help me.
The rework videos are amazing, keep up the excellent work
Thanks 👍
one of best TH-camrs , thanks 🙏
Hello
I don't know how to respond to such an appreciation, than I can thank you for the encouragement
Thank you, great video.
👍
Thank you for sharing your knowledge
Thanks for watching . 👍
@@YOYODiagnostic where can I find the dump file?
Yoyo beauty, my carprog 13.77 before doing the crack or activation with keygen, I removed the soic 8, and kept the soic so as not to lose it, in one place, fis the activation with keygen and it works perfect with the Internet connected, it works in all versions tested and approved. It doesn't block anymore, just remove the soic, you don't need a soic.
Great video thanks
Thank you.
Well done 🎉🎉🎉
👍
Friend, very good video, you will know how to fix the A1 connector
Hello.
I also have a video with rework at the A1 connector. will appear soon. thanks for subscribing
Great video sir!! Where can i buy the unit I need to reprogram a airbag module on a 2012nissan maxima? I'm buying cars and fixing them so this will be a great tool to have?? Thank you sir!!
Excellent video and explained! Keep the good working. Please if you suggest something to rework fvdi 2015?
👍
Best channel !! I souscribe. Please do Galletto Rework. Thx
Hello.
I will soon post a video with Galletto. Thank you very much for the nice words and for the fact that you are a subscriber. I try to help as much as I can and as much as I know.
@@YOYODiagnostic I can't wait any longer 🙂. With each new video I hope to see Galletto. They are all of quality, thank you.
@@sgauto6013
Hello
The next video will be Galletto. I kept you in suspense for too long. :)))
Good evening. I wanted to compliment you on this magnificent flashing tutorial and the analysis you made of the components to be changed in order to have a functional tool, real professional work! I managed to flash mine several times but now it suddenly stopped working, I wanted to reflash my carprog and impossible to program the MCU! so having seen your tutorial and that it has me much more, would you be kind enough to send me the list of components for a functional remanufacture of my carprog. I send you my request on your mail. cordially.
What's the best tool for read/write Infineon chips via OBD2 / Module Pins ?
Can you do video on rework for AVDI Clone? Also newest Xprog :)
which AVDI model do you have problems with 2018 or svc i2020?
@@YOYODiagnostic 2018
Sorry no it’s 2020
@@ContentCentral1
on the back of the motherboard you have a chip that needs to be replaced in this 2020 model. send by mail pictures of what problem you have. I would send you pictures of that chip
Hi great channel and very good videos I have one question is it possible to reprogram the eprom on car prog
Hello,
in the old version v8.21 the ee prom is encrypted and cannot be read, but in the new version v13 the eepprom is no longer needed from what I heard. I will make a video and we will experiment if it works without eeprom or not.
@@YOYODiagnostic I have clone with 10.9 it was not working I found pictures back then and replace some parts it was working but not to good I was trying to reflash but I messed up with the pin so after I found your channel I decided to repair it again but accidentally opened program that was downloaded from atomis and now the device its not recognized I think it's deleted
@@mechanicigor
Soon I will post a video where I will try if the v13 version works without that eeprom, maybe you'll be lucky and your programmer will work again.
@@YOYODiagnostic thank you very much for your help
Hi Sir Did you upload video for Carprog V13.77@@YOYODiagnostic
I ordered the processor with D at the end, I can upload flash to it but in the software no serial number is recognized. Found then at least on two places on internet that only versions A and B will work. My question to you, because you advised D to buy, have you tried and worked?
et besoin de soulever la goupille ou la connexion du stylo ou la masse de masse
Thank you for explaining
But why we didnt remove the microschip and put it on adapter?
And what about clone XPROG 6.26?
Are there any explaining later?
What is that small chip in that version of XPROG?
thank you so much
Have a nice time
If you have adapter it's more simple. About chip send me a picture on email
Hii yoyo which best prog in reading eeprom and flash and mcu
Hello,
I use CG100pro, you have many programmers (Xprog, VVDI, Orange) . All of them are good. 👍
@@YOYODiagnostic thank you my friend
awesome video, shame i have carprog clone 4.01, wish i had skills to rework, but i am no good at soldering at all, do you sell reworked unit at all??? thanks
Hello.
I'm glad you liked the video.
I sell absolutely nothing of what I present to you.
For me it's just a hobby
Hi How are you Thanks for helping any rework videos for chinese clone 13.77 all functions are not working
Hermano cómo podrías enviarme el PDF , del diagrama de la placa del carprog osea el esquemático ,en qué precio lo dejas , y tendrás algún esquemático del vcm2 de Ford ?
Hi I have a carprog clone and I am trying to read and clear crash data from MAC7242VAF64 (ford f150 2010) on bench setup, I can read the fault codes but I can not read/write the EEPROM (Read Error). Do I need to do a re work? I also have a VVDI prog not sure if that can do the read.
Hello.
use vvdi. It will work
@@YOYODiagnostic thanks for the help, best channel!!
@@kevinbhairo
Thanks 👍
I just bought a Carprog clone from a seller in france the TMS3705 transponder ic is missing on my pcb, I doubt all functions are going to work sure all the other components are there. And I have no problems putting one in but this does not seem right?
Hello.
It will work without it but you won't be able to program key chips.
@@YOYODiagnostic Yeah I was looking at the schematics, and I thought the same thanks for confirming my thoughts. I shall address this with the seller hopefully retrofitting it later will give me the function back.
Hola disculpe me gustaría q me ayude.Hacer mi. Carprog. Full. No importa si hay un cobro
Q j link utilizaste es el v9
Could i buy one reworked carprog from you ? Im very poor in electronics.
I'm not a seller. I help people only, when I have time.
I read there is an upgrade (incl. rework) to 13.77 - did you test it?
Hello.
Yes I have a video, i will post .
Hey what tool to you recommend to read Polo 6R Cluster or to set service mode on cluster? best wishes
Hello.
If you don't want to pay a lot for a programmer, I recommend the medium class CG100 or VVDI Prog.
Hi, I send you an email but you didn't answer. It was for help to rework my carprog 13.77.
Hello.
No help anymore. Sorry
hello
Great video brother. I bought carprog from china my problem is that PC is not detecting anything is plugged into USB. "No device attached" . I got lucky few times and got connection. I tried different cables and PC's but no luck again
Any ideas?
Resolder the USB port.
@YOYODiagnostic thanks for reply. I'll buy new port and give it a try
Hi sir great video.. where I could find the dump file that you use?!
Hello.
Send me a Mail ( yoyo.pc86@gmail.com )
Hi brother i have sent you a email do you mind if you can give me rework files?
Hello, one question, please, do i need also to reflash after exchange of 74HCT125M? or its okay just to change those components. Thank you.
or I mean, if all works so far so good, no need to rework right? I need to check it once again, cause i guess my carprog works quite fine.
Hello.
No need if it works.
I explained in the video what those chips do.
Never change the winning team !!!
@@YOYODiagnostic thank you very much for your answer, i appreciate your quick response also via email for KESS thing, please add community button to pay on your profile to support you. This will be i think very good also for you. Thank you once again.
@@filipbalaz2053
Hello.
No need. Thank you very much.
All of you who subscribe to this channel are part of my community and I will help you as much as I can. You don't have to give me anything. we can help without having financial expectations.
You reward me by remaining a subscriber to the channel.
If I buy a carprog v8.21 I should be do this too ? Please answer me my friend 🥺
Hello.
Test it and if it works leave it as it is.
@@YOYODiagnostic okay thanks my friend 👍🏻
Hello ! I am looking for a reliable software to find the pin out dashboard Audi A4 2007 ???
Unrelated question but maybe you can help me out. I have a Peugeot 307 2002 2.0 hdi 66KW. I tried programming a key to lock and unlock doors, it worked 2 times but both times after a day it stops working, and now it won't program the key at all. Any idea what might be wrong ? Central locking locks just fine but won't unlock the car.
what errors occur in BSI,? try a BSI reset with Lexia, but first copy memory 95160 if I'm not mistaken from BSI. save the date and extract the pin so you can reset it with lexia.
None errors in BSI, but I only have lexia, nothing to extract pin with.
@@adinimamovic4792 take BSI down and read the memory with (carprog, xprog, miniprog) and send the dump memory so I can read the pin. write me on the e-mail address.
after reset try to program the keys with lexia
Hi
strange article
Is there a time limit after flashing Karprag, because I flashed it twice, it was done successfully and Windows recognized it, but the next day I had to flash it again and Windows did not recognize Karprag.
Isn't this blinking permanent and has a time limit?
Hello.
Write an email so I can send you a good Dump to fix the problem.
Do you have the list components and link to them?
please follow the first rule in this channel to subscribe for the first time and ask for help. all ask for links and forget to click which is free.
Good morning Sir.
Do your email still working?
Hello. In my country it's evening 😂,
How can I help you?
yoyo.pc86@gmail.com
Hi sir what's the problem with carprog that don't read 24c eeprom.!?
Hello.
Your problem is like all the other clones.
Do full rework!
Hi sir I have a problem with my jtag v9 it showing a massage failed to connect to target??
Hello.
Send pictures by email with error and how you made the connections.
Not a fan of Carprog and I have the original with all the modules activated. Some of the functionality just doesn’t work and I guess the clone would be even worse.
True 🙂
Can you tell me a good one to buy? Thanks!
Yoy can same repair fvdi 2014 ?
Hello.
What problem do you have with him?
@@YOYODiagnostic is 2015 versión you can converter 2014 versión?
hello i tried to reset my mcu but my mcu can't be reset. is there any other way to reset it
Hello.
Email me the procedure you followed. I'll explain more there.
Awesome video! But I do need help getting the firmware file, can you please send me the file?
I will send you when I read emails, as I took a break for the winter holidays. I think you'll be patient considering it's free, right?
Hi Yoyo! Yes of course I can be patient!, my apologies for the reminders, just that I wasn't sure you had received my messages at first, thanks and Happy New Years!
@@ronsmith4818 check your email. No problem.
Can you update avdi 2018
Hi.
As far as I know than svci 2020 can update. At avdi 2018 clone if you have problems the chip must be changed. I don't use something like that, they are expensive for some clones. There are other alternatives. do not use clones unless there is an urgent need. I have learned over time that I end up paying more when something goes wrong because of them
Video bozuk yeniden yüklermisiniz
English please 🥺
Can i ask i have the best clone from china that works online v8 software but if you rework the device can it work like original with latest version unlocked software v12 i think it is as v10 software as some locked and dont work well on mileage correction thanks
Hello.
Use what you have now. it's ok. Stop buying all the Chinese garbage . you better turn to VVDI or CG PRO 3
@@YOYODiagnostic will you be working on the svdi 2020 clone of avdi to work all functions like the original
@@joebrown2747
Hi.
I do not have this diagnosis, I only show you what I used and what I use. but if you want to buy I advise you to go to VVDI than to buy a clone
@@YOYODiagnostic can you test if the carprog can work on the latest software v12.45 unlock all features no n/a lock
Hi.
I tested it and it works with the clone but the problem is that it is weaker than 8.21. the airbag option has errors and crashes. I better recommend CG 100. is an original product I know the price is higher but you no longer have stress with these clones. and if you don't have money, you're better off with what you have now. I know that 80 euros is not equal to 350 euros but I think it's worth it.
hello, can you send me firmware version 8.21, I will be very grateful to you
Hi i have sent email about flash file for carprog i have opened my interface and it already has full chips just need flash thanks
i have Problem with mine carprog.
It already has the 74hc125m puffers on it.
But when I tried to open the emulator the Programm hangs up and write : No response from the unit.
Can u help me?
Hello,
does the tone sound when you connect it to the PC?
@@YOYODiagnostic yes but when i try to use Volvo emulator System hang up and lost connection to the unit
@@renegatscha5083
these clones must be fully reworked.
But Hardwaretest and A9 tell me everything is ok?!?
Hi can you please send me file for carprog?
My Carprog 10.93 brand new will not connect to any of my 3 PC's win7, win10, keeps saying unknown USB Device (Device Descriptor Request fail) I have updated Bios, updated USB driver, intel MEi driver, USB2.0-CRW driver.. nothing works. please anyone have a fix for this, I cannot use this device at all.
Hello.
Send it back and try to get your money back. 10.93 is a programmer's mess. Take 8.21 version
ломаный англиский
Also, I emailed you back on January 1st can you please reply back? Please, I need help, I have other questions added to the email regarding the rework.
The email subject title is: "Please help with carprog v8.21 reset"
Thanks
Merhaba watsap numara atarmısın
What ?