You should post that 3d file up on thingiverse.com or something similar! That is if you want. I know you put time into it so giving it out might not be a favorable option... awesome video regardless keep it up!
Found this video through thingiverse. Good work! How has the PLA held up to direct sun exposure? I had some warping on prints that were left in the sun too long.
Great video! Nice to see you using your 3D printer. just got one myself specifically for car related projects. Will add this to my to-do list of 3d prints!
For a part that doesn't have any real loads, it's fine. In the engine bay, I've used PETG for some small brackets and they can handle the heat, in the cabin I had a PLA bracket that softened in the Sun so that was replaced with PETG.
Thank you for sharing this! Would you mind sharing which software you use to design your 3D projects and how you were able to match the contour of the fenders? Did you scan them?
Hi West, i used Fusion360 software, and just modelled the contour with some basic measurements and trial and error with some test prints until i got the shape right.
I know that's not a real carbon hood he cut into either right? Cuz if that a real carbon hood he should just put it where it belongs.... in the garbage. Jeez louis
That's ok, they aren't there for you to like the look, their design is purely with aerodynamics in mind, and the shape takes inspiration from cars like the Scorch S15 and Nemo Evo.
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
Looks really good, especially combined with those hood vents!
Thank you MM, looking forward to your next vid on the hardtop stand!
These look really good!
Thank you! :-)
Love your channel dude! Thanks for taking the time to make videos!
Thanks for the support thatfeel! Appreciate the kind words :-)
Really enjoy this series. Im building a mk4 supra atm and have learned a lot from your videos so thank you.
Thanks Gavin, appreciate the support! Any plans to make some videos on the Supra?
BEAVIS Motorsport I'm not very good behind the camera by not being very confident. I wish I was as it would be good for people to see the build.
You should post that 3d file up on thingiverse.com or something similar! That is if you want. I know you put time into it so giving it out might not be a favorable option... awesome video regardless keep it up!
Hey Jaren, keep an eye on my thingiverse page at www.thingiverse.com/bbeavis/designs
I'll look to share these designs there in the coming days.
Found this video through thingiverse. Good work!
How has the PLA held up to direct sun exposure? I had some warping on prints that were left in the sun too long.
Great video! Nice to see you using your 3D printer. just got one myself specifically for car related projects. Will add this to my to-do list of 3d prints!
Hey Homebuilt, the printer is always running, coming up with solutions to problems I didn't know i had!
Came up really well. $30 + your time is good value. Ive been looking for options for my trackcar. Options seem to be from the usa and around 150u$
Thanks WRX, it is questionable whether it will offer any benefit, but it was a good value little upgrade nonetheless and a great fun challenge.
Another good video, thanks. Did I miss where you mentioned what you glued them in with?
Thanks Paul, I use Sikaflex black for most things like this.
Nice, just on the CAD designing some myself, how do you find the PLA over time, I tend to think PETG would be better for external use.
For a part that doesn't have any real loads, it's fine. In the engine bay, I've used PETG for some small brackets and they can handle the heat, in the cabin I had a PLA bracket that softened in the Sun so that was replaced with PETG.
Thank you for sharing this! Would you mind sharing which software you use to design your 3D projects and how you were able to match the contour of the fenders? Did you scan them?
Hi West, i used Fusion360 software, and just modelled the contour with some basic measurements and trial and error with some test prints until i got the shape right.
BEAVIS Motorsport that’s great. Thanks so much!
Have you feel some change with the vent
It is only a small change, not really physically noticeable, but every little bit helps.
What glue did you use??
For things like this, I try to use Sikaflex 221
really cool
Thanks Zero!
What tires are you running on the track?
Currently using a set of Yokohama A050 225 50 15
how have these been holding up? just downloaded the STL from thingiverse
Holding up fine, they don't have much to do in life other than sit there.
do you have an STL file?
Hi Alex, please keep an eye on my thingiverse page at www.thingiverse.com/bbeavis/designs
I may look to share these designs there in the coming days.
Nothing special or exotic here bois. Nice video!
Thank you, i just want the wing to work well!
Functionally fierce or fantastically ferocious🤔
All of the above?! :-)
Definitely 👍
Can you sell me one pair of that vents
Please write to mi. Topinsky62@gmail.com
Hi Julio, you can download the 3D model here: www.thingiverse.com/bbeavis/designs
I know that's not a real carbon hood he cut into either right? Cuz if that a real carbon hood he should just put it where it belongs....
in the garbage. Jeez louis
What are you talking about?
I don t like this vents, too tall
That's ok, they aren't there for you to like the look, their design is purely with aerodynamics in mind, and the shape takes inspiration from cars like the Scorch S15 and Nemo Evo.
are we here to listen to music??? or watch and learn something,,,make another video without music,,,then I will give you a thumbs up,,,
Does the music really offend you that much?