Brilliant, Boomer! So appreciate your persistent encouragement through expected difficulties inherent in modeling. Trust and don't rush the process - No problems, only solutions! Have a great week, pal! ✨
The issues you face in creating a scale model are very similar to the issues that arise in building prototypes. Models benefit because you're not dealing with scaled weight (a weighty debate on that topic), so the materials are easier to manipulate and flaws are easier to hide or overcome. When you mentioned the railings my mind started wandering around the challenges of building this project with brass. Or wood. And then I had to back track 5 or 6 minutes because I completely tuned you out. lol Long story short, a very cool project. I appreciate your modeling insights.
Yes indeed. Models also help to solve issues for the prototype as well. This model needs to be robust since it is not really a traditional "static" display. It will be handled for simulating operations. Therefore, the brass railings (in this case) will make sense due to the abrasions that will inevitably occur.
Hi, well. My name is André Elias and I am a naval model maker. I have been following your work and in the naval area you are doing well. This FerryBoat is wonderful. Congratulations on the results. They are increasingly beautiful.
It's alot of fun building this Ferry. It actually functions quite well on the layout as well. You will see the whole concept soon. Thank you for the sub as well by the way. Cheers ~ Boomer.
Another great lesson. These were the problems and challenges which Platers faced daily in the Shipyards when erecting shell plating and units onto the build. They used drifts, block and chain to coax the steel into place before tacking then fully welding or bolting when they joined steel to Aluminium as they did with the hull/superstructure of the QE2
Yes I was going to say welcome to ship building. Same thing happens in the yard, funny how you almost have to build a ship as it was built. I understand that wood ships are the same, you nearly need to build like the real one was built.
I can't even, as the kids used to say. I can't even understand everything that went into this. The way it looks like there are curves on the end you're showing, the side windows on the car level, the time it took for everything, including planning. All the holes on the sides just above the rub rails. So much more...just really well done. The experience shows. I feel like there'd be no way to make a video building the whole thing, even a series of videos. I'll be really impressed if you come out some of those.
I have over fifty cans of video on this build. Each can has half a dozen clips and dozens of photos. There is a ton of content. The challenge is in post production editing and timing of the publish . . . and actually building the model. Cheers.
Best sentence I heard today!!! "No problems, only solutions" ❤ ... Or: "Where there is a will, there is a way" 🤝👍 ... Ich bleibe auf alle Fälle dran, weil ich weiss dass Deine Prinzessin wieder (wie einfach Alles von Dir) einzigartig fantastisch wird!!! 😉 Kindly regards and THANKS, Olli 👌
AMAZING BOOMER. I can't wait to see it on the layout with the rolling stock moving in and out. The ship is probably my favorite part of the layout. I only wish you could build the entire length but I understand the space limitations. Makes me wonder if anyone has constructed a HO scale supertanker or container ship. That would be incredible to see but an immense project for sure.
Thanks Boomer! This is AWESOME :) When I first saw you mention the ship you were gonna create I was like "uh whaaaat!" It is not even finished and my mind is blown lol! I just acquired a whole lot of styrene from a hobbyist clearing out his stuff... I didn't think scratch building was possible until I heard you telling us "just start with something small", so trackside hut is on my to do list haha!
Boomer, this ferry build is simply OUTSTANDING !!! The operating sessions will be pure pleasure. Am I correct in assuming that all this Coastal Intermodal rail traffic goes out to Vancouver Island only ???
Absolutely amazing Boomer! Truly a work of art and you spend the time to explain nuances, how to overcome the inevitable oh crap moments. Thank you for all you do, you are an internet legend!
In the future you can always make the front of the ferry if you want to display the complete ship as a model by itself. I am building a model ship kit that will be cut to be a waterline boat on the layout, but mate with the lower haul for display on the shelf. Great work Boomer!
Boomer, great video on the opportunities of scratch building. Keep at it, and any issue can be overcome. This ship/boat/ferry would have to be the most awesome / complex build I have ever seen, and thank you for taking me on that journey with you. Thank you for sharing, cheers, and stay safe, Michael
I have been doing more of my scratchbuilding with styrene lately, inspired by you. It has changed the way I think about my builds, adding another arrow in the quiver. Thanks!
I can confidently say, and I'm sure many will agree, that you Sir are a true artist and a genius. Love your work and your teachings. I truly appreciate your words of encouragement as well, helping us build up the courage to take on these modeling tasks.
Thanks, Boomer. I agree on using the solvent cement. As far as I'm concerned It's the only way to go when building structures and details. It's like the acrylic paint scenario when it comes to assembling models quickly, neatly, filling in gaps, and softening to shape for fine details. If you're still using the plastic model glue in the squeeze tubes you'll never discover what modeling is all about when it comes to assembling plastics, I think the styrene plastic is purposely made softer for modeling realism. Part of the advantages is the ability to add textures like wood grain and carving in details like rotted wood or tree bark with most any tool or sandpaper. It's a scratch builder's dream material to model with. With the added illusion of paint it can be made to look like most any type of surface one uses on a layout that your imagination and painting talents can pull off. Along with acrylic paints, styrene plastics is one of the most versatile, durable products one can use to build anything on a layout.
Looking so great, as a scratchbuilder myself I always wonder how others build stuff, like the rounded edge on the front of the superstructure. About filling holes, I use MEK as a solvent and I save all my styrene dust from sanding or filing in a jar to use later to fill holes with solvent, works perfectly. Maybe an idea for other scratchbuilders. Btw, problems sounds negative, or like I call negative: " less positive" there are challenges, no problems and always solutions ;)
Ah yeah great, was looking for something similar, but couldn't get the desired diameter, so I stacked square rod and filed and sanded it into the desired shape.@@boomerdiorama
It works great in some situations. I also like the Tamiya "rattle can" paint because it seems to blend well with the solvent if it runs out a little. Tamiya ia a type of "chimera" paint this way and can be mixed with almost any other media without going bad in some ways. Cheers.
Looks great. I love Evergreen styrene. Plastruct also has some really nice styrene in really small sizes and more manageable packs that i love to use as well. 🤘
Thank you. Despite the problems and challenges I experience on this build I am very happy with it technically. The docking and track work all work flawlessly which is a real relief. Really happy I solved all the operational functions first. Now I cruise until she is done. Cheers.😁
@@boomerdiorama I first said use paintable caulk to fill the gap .... then you said you hate to use fillers .... Thats why I deleted my first comment 🤣
when I was a kid I would travel to canada and take the ferry to P.E.I.ever summer back then there was rails I went back with my kids and the rails were removed now the ferry is gone there is a bridge now thanks for the memory the chickinman
Did test runs on the shelf layout marine terminal and it dock's up and matches perfectly to the track ramp. The rail cars run on and off the Ferry perfectly like the prototype as well. I solved all those issues in the beginning.
@@TWNTY-es8lu It actually floats about a sixteenth of an inch above the water surface (by way of a cantilever support cradle) so it won't scratch the water surface on the layout. 😉
@@boomerdiorama amazing planning..I guess if it were to ever sit on the layout water you could glue a thin layer of felt on the bottom of the hull (without it being visible from the edge of course) either way cant wait to see a small op of cars being loaded..very cool!
@@TWNTY-es8lu It took quite a bit of planning to get the whole boat to sit the way I wanted on the layout when it lays in the cradle. The trick is to make sure the hull superstructure sits a hair below the ramp head. This way you can always shim it up. Not so if you rise above it . . . ouch!🤣
Full lighting yes indeed. If you look closely, you can see inside the passenger lounge where the benches are actually "square" conduit pipes for lighting cables, etc.
Another fantastic instructional video on scratchbuilding models with styrene... A modification to your comment. "There's no problems, only challenges...". BTW... Not a criticism. Your pronunciation of "capillary" and "decal" really throw me. Must be a Canadian thing, because I've heard other Canadian modelers pronounce them the same way. Us Yanks, and just about every other modeler from other countries (that narrate in English) say it a bit differently. Again, not a criticism or nitpicking, nor do I expect you to change it. Just an observation. Carry on Boomer!
Brilliant, Boomer! So appreciate your persistent encouragement through expected difficulties inherent in modeling. Trust and don't rush the process - No problems, only solutions! Have a great week, pal! ✨
Thank you!
WOW. That is the most complex build I’ve ever seen. Gorgeous.
Far more complicated ships than this but it is a challenge for sure.
The issues you face in creating a scale model are very similar to the issues that arise in building prototypes. Models benefit because you're not dealing with scaled weight (a weighty debate on that topic), so the materials are easier to manipulate and flaws are easier to hide or overcome. When you mentioned the railings my mind started wandering around the challenges of building this project with brass. Or wood. And then I had to back track 5 or 6 minutes because I completely tuned you out. lol
Long story short, a very cool project. I appreciate your modeling insights.
Yes indeed. Models also help to solve issues for the prototype as well. This model needs to be robust since it is not really a traditional "static" display. It will be handled for simulating operations. Therefore, the brass railings (in this case) will make sense due to the abrasions that will inevitably occur.
Hi, well. My name is André Elias and I am a naval model maker. I have been following your work and in the naval area you are doing well. This FerryBoat is wonderful. Congratulations on the results. They are increasingly beautiful.
It's alot of fun building this Ferry. It actually functions quite well on the layout as well. You will see the whole concept soon. Thank you for the sub as well by the way. Cheers ~ Boomer.
Another great lesson. These were the problems and challenges which Platers faced daily in the Shipyards when erecting shell plating and units onto the build. They used drifts, block and chain to coax the steel into place before tacking then fully welding or bolting when they joined steel to Aluminium as they did with the hull/superstructure of the QE2
Wow! That sounds cool. Thanks for sharing that. CHeers ~ Boomer.
Yes I was going to say welcome to ship building. Same thing happens in the yard, funny how you almost have to build a ship as it was built. I understand that wood ships are the same, you nearly need to build like the real one was built.
This will make a fantastic addition to your layout, very cool!
I can't even, as the kids used to say. I can't even understand everything that went into this. The way it looks like there are curves on the end you're showing, the side windows on the car level, the time it took for everything, including planning. All the holes on the sides just above the rub rails. So much more...just really well done. The experience shows. I feel like there'd be no way to make a video building the whole thing, even a series of videos. I'll be really impressed if you come out some of those.
I have over fifty cans of video on this build. Each can has half a dozen clips and dozens of photos. There is a ton of content. The challenge is in post production editing and timing of the publish . . . and actually building the model. Cheers.
Best sentence I heard today!!! "No problems, only solutions" ❤ ... Or: "Where there is a will, there is a way" 🤝👍 ... Ich bleibe auf alle Fälle dran, weil ich weiss dass Deine Prinzessin wieder (wie einfach Alles von Dir) einzigartig fantastisch wird!!! 😉 Kindly regards and THANKS, Olli 👌
Thank you! Cheers!
AMAZING BOOMER. I can't wait to see it on the layout with the rolling stock moving in and out. The ship is probably my favorite part of the layout. I only wish you could build the entire length but I understand the space limitations. Makes me wonder if anyone has constructed a HO scale supertanker or container ship. That would be incredible to see but an immense project for sure.
Thank you very much!
I don’t which Iike more, this kind of video’s in which you just explain or the ones in which you are building something. I think they are all awesome!
Hopefully a little bit of both. ;-)
Thanks Boomer! This is AWESOME :) When I first saw you mention the ship you were gonna create I was like "uh whaaaat!" It is not even finished and my mind is blown lol! I just acquired a whole lot of styrene from a hobbyist clearing out his stuff... I didn't think scratch building was possible until I heard you telling us "just start with something small", so trackside hut is on my to do list haha!
You can get really nice hinges and detail parts from Tichy Train Groups for scratch building as well. ;-)
Boomer, this ferry build is simply OUTSTANDING !!! The operating sessions will be pure pleasure. Am I correct in assuming that all this Coastal Intermodal rail traffic goes out to Vancouver Island only ???
All the traffic goes to Vancouver Island and up the B.C. coast inlets as well, like pulp & paper mills, etc.
Absolutely amazing Boomer! Truly a work of art and you spend the time to explain nuances, how to overcome the inevitable oh crap moments. Thank you for all you do, you are an internet legend!
Thank you. I have a boat load of video on this build yet to release. Thanks for sharing. Cheers. ;-)
In the future you can always make the front of the ferry if you want to display the complete ship as a model by itself. I am building a model ship kit that will be cut to be a waterline boat on the layout, but mate with the lower haul for display on the shelf. Great work Boomer!
Waterline hulls are nice for display on the layout. They also look cool for nautical bookends as well. ;-)
Boomer, great video on the opportunities of scratch building.
Keep at it, and any issue can be overcome. This ship/boat/ferry would have to be the most awesome / complex build I have ever seen, and thank you for taking me on that journey with you.
Thank you for sharing, cheers, and stay safe, Michael
Thanks, will do!
I have been doing more of my scratchbuilding with styrene lately, inspired by you. It has changed the way I think about my builds, adding another arrow in the quiver. Thanks!
Yes indeed. Awesome!
I can confidently say, and I'm sure many will agree, that you Sir are a true artist and a genius. Love your work and your teachings. I truly appreciate your words of encouragement as well, helping us build up the courage to take on these modeling tasks.
Thanks for sharing that. My intention is to inspire and share the experience. Cheers. ;-)
Thanks, Boomer. I agree on using the solvent cement. As far as I'm concerned It's the only way to go when building structures and details. It's like the acrylic paint scenario when it comes to assembling models quickly, neatly, filling in gaps, and softening to shape for fine details. If you're still using the plastic model glue in the squeeze tubes you'll never discover what modeling is all about when it comes to assembling plastics, I think the styrene plastic is purposely made softer for modeling realism. Part of the advantages is the ability to add textures like wood grain and carving in details like rotted wood or tree bark with most any tool or sandpaper. It's a scratch builder's dream material to model with. With the added illusion of paint it can be made to look like most any type of surface one uses on a layout that your imagination and painting talents can pull off. Along with acrylic paints, styrene plastics is one of the most versatile, durable products one can use to build anything on a layout.
I would have to say you nailed it there. ;-)
Superb! You are an incredibly talented craftsman.
I appreciate that, but like everyone, I am far from perfect. Find what you like and press in is my modo.
Dear Boomer, great tips for solving such deflection. Definitely adds to the model. Cheerio
Cheers!
Wow Boomer. I haven’t seen anyone go into such detail vis a vis the problems with deflection etc. Thank you!
I have loads of video on this build I have not published yet. Should be a fun ride until this fall. Cheers!
@@boomerdioramalooking forward to seeing them Boomer :)
Nice work! I'm definitely looking forward to the future videos on this build!
You and me both!
Wow! Thanks for the tips. This solves some problems I've run into and set aside. Thanks again.
Great to hear!
Great work Boomer!
Very inspiring, thank you
Cheers
Bob
👍
Looking so great, as a scratchbuilder myself I always wonder how others build stuff, like the rounded edge on the front of the superstructure.
About filling holes, I use MEK as a solvent and I save all my styrene dust from sanding or filing in a jar to use later to fill holes with solvent, works perfectly.
Maybe an idea for other scratchbuilders.
Btw, problems sounds negative, or like I call negative: " less positive" there are challenges, no problems and always solutions ;)
The corner of the superstructure is "quarter" round stock.
Ah yeah great, was looking for something similar, but couldn't get the desired diameter, so I stacked square rod and filed and sanded it into the desired shape.@@boomerdiorama
@@RTM-fan Between Plastruct & Evergreen, all the profiles one needs are covered. 😁
Fantastique bateau construit par un as de la maquette ! Bravo
Thank you!
I like your idea of using the rod and Welding.
It works great in some situations. I also like the Tamiya "rattle can" paint because it seems to blend well with the solvent if it runs out a little. Tamiya ia a type of "chimera" paint this way and can be mixed with almost any other media without going bad in some ways. Cheers.
If only Boomer lived nearby to help me with my steel mill scratchbuilds 😅
You can do it. Make it all your own. ;-)
Awesome construction! Great tips!
😁✌
Looks great.
I love Evergreen styrene. Plastruct also has some really nice styrene in really small sizes and more manageable packs that i love to use as well. 🤘
Yes! I love the triangle and octagon stock from Plastruct. They also have decent stair cases as well, etc.
looks so realistic. great job
Thank you!
Wow. Man that looks great.
Thank you!
Wow Boomer ...... You blow me away!!! ...... Amazing
Thank you. Despite the problems and challenges I experience on this build I am very happy with it technically. The docking and track work all work flawlessly which is a real relief. Really happy I solved all the operational functions first. Now I cruise until she is done. Cheers.😁
@@boomerdiorama I first said use paintable caulk to fill the gap .... then you said you hate to use fillers .... Thats why I deleted my first comment 🤣
@@XBOXShawn12thman I use a similar method with matte medium which is also paintable. 😉😊
Looks awesome 🚢🚢🚢🚢👍🇨🇦
Thank you!
Boomer it is looking like the real thing. Great job, love it❤❤
Thank you!
thats awesome i have always loved the carrier princess. now you got me thinking of some way to in corperate it into my layout. your awesome
Cool!
when I was a kid I would travel to canada and take the ferry to P.E.I.ever summer back then there was rails I went back with my kids and the rails were removed now the ferry is gone there is a bridge now thanks for the memory the chickinman
You are welcome!
So cool!!
Cheers!
Absolutely brilliant Boomer!
Thank you!
Are you going to test run it in the tubby? ya know to make sure it floats.???..😂🤣🙃 looks fantastic!!
Did test runs on the shelf layout marine terminal and it dock's up and matches perfectly to the track ramp. The rail cars run on and off the Ferry perfectly like the prototype as well. I solved all those issues in the beginning.
@@boomerdiorama just incredible work Boomer...your talent and patience results are amazing!!!!...
@@TWNTY-es8lu It actually floats about a sixteenth of an inch above the water surface (by way of a cantilever support cradle) so it won't scratch the water surface on the layout. 😉
@@boomerdiorama amazing planning..I guess if it were to ever sit on the layout water you could glue a thin layer of felt on the bottom of the hull (without it being visible from the edge of course) either way cant wait to see a small op of cars being loaded..very cool!
@@TWNTY-es8lu It took quite a bit of planning to get the whole boat to sit the way I wanted on the layout when it lays in the cradle. The trick is to make sure the hull superstructure sits a hair below the ramp head. This way you can always shim it up. Not so if you rise above it . . . ouch!🤣
Crazy good!!!!
Hey D. Thanks for commenting! Cheers.
Thanks
Wow! Thank you Peter! 👍
Is this Masterpiece going to have any lighting?
Full lighting yes indeed. If you look closely, you can see inside the passenger lounge where the benches are actually "square" conduit pipes for lighting cables, etc.
Another fantastic instructional video on scratchbuilding models with styrene... A modification to your comment. "There's no problems, only challenges...".
BTW... Not a criticism. Your pronunciation of "capillary" and "decal" really throw me. Must be a Canadian thing, because I've heard other Canadian modelers pronounce them the same way. Us Yanks, and just about every other modeler from other countries (that narrate in English) say it a bit differently. Again, not a criticism or nitpicking, nor do I expect you to change it. Just an observation. Carry on Boomer!
Thanks for sharing. My Grandmother immigrated from North Dakota . . . lol. ;-)
@@boomerdiorama LOL for sure... Keep on keeping on Boomer.
@@WHJeffB Cheers eh (Ay) . . . 😉