Thanks a lot for the video bro. I've been following a document given by one of the distributors, but for the past 2 days I've been failing to set it up. I managed to do it in just over 11 minutes following you on the video.
For some reason i cannot reply on your comment Lennard Buenavidez Hi, in this setup it will only be on the wireless side of things. For you lan to also have internet access but not go through the hotspot you will need to create a new bridge with your lan ports and give the bridge a ip in a different subnet. Configure a second dhcp server for the lan bridge and you will be good to go
Hi awesome tutorial everything work's great just one question how to i bridge the wlan1 with one of the Ethernet ports so i can connect more aps on a switch
can you do a video on how to setup a wireless ptp between two sites? Basically if I wanted to send my internet connection from one property wireless accross to another property in line of site
Hi awesome tutorial everything work's great just one question how to i bridge the wlan1 with one of the Ethernet ports so i can connect more aps on a switch
@Leonard - Go to "Bridge", then go to + symbol, click apply, click ok. Next - Go to ports, and add eth2 (LAN) and wlan1 (Wifi) to the bridge - Just make sure your DHCP server is configured on the bridge1 and not on eth2 (LAN) anymore.
Can I somehow setup throttling after the data limit is reached that instead of cutting the client off its only gives him severely rate limited bandwidth. Please assist. How would you go amount reporting what sites for example each user visits? Know of a way?
I need to set up a Hex Lite if possible to : Act as the dhcp server Establish an ADSL connection through a snap bridged D-Link ADSL router on ether 1 Fail over to a 4G connection through a HUAWEI B315s-936 on Ether 2 Provide a Hotspot on the HexLite utilizing the WIFI facility provided by the HUAWEI Establish a ppp connection to another Mikrotik irrespective of whether in primary or fail-over mode. While I have found tutorials on aspects of this requirement, none cover the specifics in such a way as to adequately enlight this little mind. Are you contactable ?
Hi I need help with Hotspot my html login page, after Creating hotspot, it don't redirect to my html login page, it direct to mikrotik default hotspot page can you help me I am new for Mikrotik routers
I need your help. I have a Wi-Fi at home, and am sharing it with my family on that mean user. I need to create a new user for them and limit it's speed, so that i can use my Wi-Fi (my user) with bigger speed and let them use the use that is limited on speed.
Also sorry one more thing when people connect to your hotspot is it using the Mikrotik for DHCP or does it use your existing router, as i my existing one only supports 32 and i want to know if i can make this hotspot process support more users than that with these features ?
Thanks a lot for the video bro. I've been following a document given by one of the distributors, but for the past 2 days I've been failing to set it up. I managed to do it in just over 11 minutes following you on the video.
Thank you .. for saving me hours of working at this .. now i just need to create a re peter access point and we are running
Dankie boeta. Kort en kragtig. Lekker werk.
Thanks for this special video. I would like to get in touch with you for discussion.
Baie nice tutorial. Gaan dit nou try.
Brilliant Tutorial. Thank you Sir
Nice one boet!
thanks bro,
your video save my day ...
valuable video.. thanks dear.... its success dear.. can u explain the users download limit like 1m 2m unlimited
For some reason i cannot reply on your comment Lennard Buenavidez
Hi, in this setup it will only be on the wireless side of things. For you lan to also have internet access but not go through the hotspot you will need to create a new bridge with your lan ports and give the bridge a ip in a different subnet. Configure a second dhcp server for the lan bridge and you will be good to go
Hi awesome tutorial everything work's great just one question how to i bridge the wlan1 with one of the Ethernet ports so i can connect more aps on a switch
can you do a video on how to setup a wireless ptp between two sites?
Basically if I wanted to send my internet connection from one property wireless accross to another property in line of site
Can we export the user as a monthly report for usermanager with all information about the user, uptime, or...?
Hi awesome tutorial everything work's great just one question how to i bridge the wlan1 with one of the Ethernet ports so i can connect more aps on a switch
@Leonard - Go to "Bridge", then go to + symbol, click apply, click ok.
Next - Go to ports, and add eth2 (LAN) and wlan1 (Wifi) to the bridge - Just make sure your DHCP server is configured on the bridge1 and not on eth2 (LAN) anymore.
in STP on Protocol Mode, why did you use "none"?
Greeeeeat
Worked like a charm - many thanks
You are in south africa.... me too how do i contacted you
very good video, but my DCSP Server after setup is red and then i cant access userman
The problem might be that the interface the DHCP server is on is not on an active interface.
Can I somehow setup throttling after the data limit is reached that instead of cutting the client off its only gives him severely rate limited bandwidth. Please assist. How would you go amount reporting what sites for example each user visits? Know of a way?
What was the use of User manager package?
You can find it at mikrotik.com/download just download the Extra packages for the correct board you are using
I need to set up a Hex Lite if possible to :
Act as the dhcp server
Establish an ADSL connection through a snap bridged D-Link ADSL router on ether 1
Fail over to a 4G connection through a HUAWEI B315s-936 on Ether 2
Provide a Hotspot on the HexLite utilizing the WIFI facility provided by the HUAWEI
Establish a ppp connection to another Mikrotik irrespective of whether in primary or fail-over mode.
While I have found tutorials on aspects of this requirement, none cover the specifics in such a way as to adequately enlight this little mind.
Are you contactable ?
This trick i can use MikroTik RB2011UiAS-RM model ?
Hi I need help with Hotspot my html login page, after Creating hotspot, it don't redirect to my html login page, it direct to mikrotik default hotspot page can you help me I am new for Mikrotik routers
I need your help. I have a Wi-Fi at home, and am sharing it with my family on that mean user. I need to create a new user for them and limit it's speed, so that i can use my Wi-Fi (my user) with bigger speed and let them use the use that is limited on speed.
What mikrotik you have
Is there a way that you can make it generate usernames and password that are random so that people can use them till their data is depleted etc..
Also sorry one more thing when people connect to your hotspot is it using the Mikrotik for DHCP or does it use your existing router, as i my existing one only supports 32 and i want to know if i can make this hotspot process support more users than that with these features ?
after following these steps i get the error radius not responding ?
thanks very much. after i assign a user i keep getting radius server is not responding.
how are you today?
Hi my userman is no longer working how can u help on that one I can't login anymore can u help out pls
what is this? a video for super macro eye?
Give this boet a bells!
dankie ou tjom
any help on that please?
The best thing to do is to reset the router and start over again
i have done that but still getting the same feedback
hi sir , how to configure rb750gr3 user manager
hi, i don't think there is a userman package available for the arm architecture at the moment
i need help i created a hot spot but it not requesting for password what do i do
I don't understand why is the loopback interface
The loopback interface is only for running the hotspot server on. It is not a physical interface
i get "user "test" not found
hi all how to setup user with limit 1 moth
Afrikaans?