Repair Fitbit Versa Screen
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- This video demonstrates how to fix a Fitbit Screen which has fallen out or popped out. In under 3 minutes this is a simple how to video which shows you step by step.
Buy Glue Here - "www.amazon.co...."
As an Amazon Associate I earn from qualifying purchases. Please remember to Like and Subscribe.
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
Thank you for this. This is the second time this has happened to me. First time was within a year so they replaced it. Can't say I'm impressed that this keeps happening to a supposedly waterproof watch.
No problem 🙂
Thank you! Thanks so much. I was about to buy a new one. I had my fitbit for over a year and I love it! I can't wait to repair my screen.
No problem and good luck!!
Thanks so much! Just got my glue in the mail and gonna attempt this tonight. Really didn't want to have to buy a new one.
Thanks for your comment. I hope it went successfully 🤞
Thank you for the tip, I was successfully able to repair my fitbit screen.
That's great to hear 👍
Thank you for this info, my Fitbit versa 2 face just popped off after 2 years almost exactly! Lol Your DiY video SAVED ME from taking it somewhere and asking "how much"? Hahaha 🙌🌟
Really good to hear :)
First Versa face came off within a year or so, and was replaced with partial credit, now second one face fell off again little over 2 years. Not good. Will try gluing back on - thanks for sharing.
No problem and good luck!
Mine has done the same, Versa, think will try the Garmin or Samsung when it stops working. Very bad design. Thanks for informative video.
No worries 👍
Thank you so much I needed this ❤️🥰🙏🏽
No probs :)
Did you have problems charging it after it came unglued? Mine starts charging but as soon as I put it down it stops 🙁 I'm hoping gluing it shut will fix it...but if it doesn't...and then it's glued shut...
No issues with charging at all. Perhaps you have water / condensation at the back of the watch where the terminals are based. You could try drying it out by leaving it near a radiator for some time.
The link to in your description doesn’t seem to be working for me. I also wasn’t able to find the name brand or type of glue you used either. Do you remember what it is called?
I did notice that, it's a bit annoying. They keep changing the name/brand. Search it up on Amazon or eBay and look for a similar version. It just needs to be strong, water proof, and have that very fine needle nozzle.
My Fitbit versa screen loosen and now I have a white screen. How do I fix the white screen.
Do you remove the original seal before gluing, if it is still 90% attached underneath edge of the 'face'?
Its a decision for yourself, it's all about being making it water tight. I did remove my original seal but then again most of my screen was off.
Oh BTW, I used construction strength Gorilla Glue, (because I already had it), a thin bead around the edges...worked just fine. Now I don't have to order "special glue" to fix it.
Why would anyone do a water test?
You either did it well and it's fine or you messed it up and might as well wait for it to actually get wet instead of just ruining it
Hi thank you for the video
Where i can buy PCB board for Fitbit versa 3?
I have no idea I'm afraid. eBay possibly?
@@Jaffabite thank you for your reply
The glue link has expired. Also, as I'm in the US, could you provide a link to a glue sold here?
Hi there and thanks for tuning in. The glue I link to keeps going out of stock. I would recommend searching around for watch repair glue and just ensure that it is waterproof.
Could you use E6000?
Hi there, I would say so. Just double check that it mentions waterproof before buying it.
What kind of glue was used?
It was a waterproof watch glue (it's like a rubbery silicon). Search Amazon or eBay for something suitable.
I think I will just purchase a new Fitbit. I don't have the glue and would have to send off for it.
Thanks for the video. Very useful. I wanted to buy the glue using your link as thanks, but it is dead. Just thought I would let you know.
Thanks for the feedback and the info about the link. Amazon have recently updated how it manages the links so I'll have to update mine. I trust you found the glue ok in amazon or ebay but if not just let me know.
@@Jaffabite What about super glue? Or would that be a bad idea? I've had my Versa 2 for 3 years and the face just came off. I googled it and had no idea this was so common. I guess I'm lucky it lasted this long compared to how soon it happened to most others I've seen comment.
What kind of glue are you using?
The glue I linked to keeps going out of stock. I would suggest searching for Watch Repair Glue and just check that it is waterproof. Also check how it dispenses it as having a fine point makes it an easier job.
Annoying that it doesn’t just snap back on.
I have a versa2 can use a 22mm strap
Strap widths vary slightly depending on where you buy them from but it is around 22mm. The Versa straps fit the Versa 2 and vice "versa". 😁
Will this work for a versa 2
All the Versa's are quite similar in design so I would think so.
Where can I find this glue ??! My Fitbit screen just started coming off..
There should be a link in my description. 🙂
@@Jaffabite the link no longer works. Can you add the glue name?
I can't make out the name of this glue can you get it on Amazon
There should be a link in my description. 👍
This waterproofs it too right?
Yes the glue is waterproof, it's like a rubbery glue once dry, so it all depends on how well you complete the repair. Mine is still holding up well in the water 👍
Can I use super glue?
No I wouldn't suggest superglue. It needs to be a rubbery waterproof type of glue. Search for watch repair glue and check for which ones state water proof.
What do you do if it leaks and the screen goes black
Google "how remove moisture from watch" and try one of the techniques which come up. Good luck.
Sir m from India and m facing problem in my Fitbit versa band from last 4 months. I tried every thing Bt no 1 find new display to replace old 1. If u hv any solution plz let me know
If your screen is faulty and cannot be repaired (and is out of warranty) then all I would suggest is looking for a screen or replacement watch on eBay.
Not sure if you already did it, but I left my seal attached. It was mostly still on, but I figured it can only help with the sealing process and making it as water proof as possible.
My fitbit versa touch screen is not responsible, will changing the toich panel solve the problem? Any solution for this? Pls help
I have the same issue.. Searching for a screen
It depends where the problem is. If its to do with the watch motherboard then it won't make a difference. I would definitely check the connection from the watch to the screen as if this has come loose then that would stop it from working and would be an easy cheap fix. Good luck
Woke up and my screen is hanging off and screen isn't showing anything only colour lines at bottom would changing screen solve this ?☺️
@casey garrett it depends if there is a fault and if so where abouts it is. If it's the connection lead or motherboard then replacing the screen will make no difference. However if the problem is with the screen then this will of course solve it. I would first check that the lead hasn't become loose at either end as this could cause that type of problem with the display. As best you can try making sure the connection is firmly in place at both ends and look at the screen while you do it as it may help diagnose where the problem is.
I don't know why anyone buys from fitbit, my girlfriend has had two, first one had connection problems after 6 months and because she'd bought through ebay the warranty wasn't honored now the face has fell off a replacement just out of warranty. Chinese quality with a 1st World price tag!
face fell of on one of my friends versa also.
Sad you have to do this. But used super glue. Nothing special. 😊. Obviously a ploy for the adhesive to have an end life so most people will buy another one. Not..smh.