EASY & SPECIAL 4WS SETUP | EDGETX | MT12 [EN]

#radiomaster #mt12 #tutorial In this video we are going to make a special 4WS steering setup.
The setup should provide the following functions:
- Control over the steering modes with Switch A (SA)
- If SA is in outward position: front wheel steering only
- If SA is in middle position: 4WS steering
- If SA is in inward position: Crab mode
But: if SA is in outward position (front wheel steering) then the steering on the rear axle should be controlled with the pot P1 independently from the front wheel steering.
If you like my work, please hit the like and subscribe buttons and feel free to buy me a coffee:
www.buymeacoffee.com/arminrc

[@DogDreamy]

Vielen Dank für die einfache Erklärung. Sehr passend für mich da ich gerade einen 3Achser mit zwei gelenkten Achsen baue

[@arminrc]

Dann kam das Video genau zur richtigen Zeit 😉 Vielen Dank für den Kommentar!

[@jleftbrane]

Thanks so much! All the other
"solutions" I've seen are overly complicated and would be hard to use during a comp. !
I had a feeling it was easier !
You made this sooooooo easy
Please change the title to " easy 4WS on MT12 😂
A coffee is coming your way!!!❤

[@arminrc]

Thank you for the comment! Its good to see that this is what you need! Changed the title 😀

[@AllevRot]

Your videos are some of the best I found from the limited number available. Yours are also the most straight to the point and easiest to follow I believe,. For mine I have programmed it similar: My rear steering servo is on Rx Channel 4 & independently controlled RearWS from pot P2. I also use switch SA inner position for FrontWS, middle position for 4WS and outer position for Crab Steer. It is a matter of preferences really. I just think that I find it more intuitive set up this way. Thankyou, keep them coming.

[@arminrc]

Thanks for these inspiring words! Highly appreciated and I am glad that my videos are of some help for you! The really great thing about EdgeTX is, that there is not only one way to get a specific result. Everyone can set it up exactly the way they want it. I know that this fact may seem overwhelming to some in the beginning but once you master it, it gives you amazing flexibility and it seems you have mastered it! 👍

[@DanPRC]

Awesome video! I have several micros with AWS and now I can bind them to my 4in1 if I please! Specially my AWS 6x6. I’m glad you decided to keep making these help videos and accept challenges! I just bought you a cup of coffee. Lol

[@arminrc]

This is cool and thank you very much for your support (coffee)! It is highly appreciated! May I ask, what Rx you are using in your micros?

[@DanPRC]

@@arminrc You’re welcome. And I use Dumbo Rc receivers.

[@petterheggdal8376]

thanks for the good turtorials.

[@arminrc]

Thanks Dude! The thumb steer adapter I designed/printed myself. You can find it on thingiverse (arminrc)

[@JPWirt]

This is great! Thank you for posting!

[@arminrc]

You are welcome! Glad you like it!