Good video. Nice clear look at the process. I have a 2015 VW Passat and it looks to be the exact same. I changed mine out yesterday and it did not want to come out. After multiple tries it finally broke off and left the stem in the hole. Finally got it out and went to place the new one in and it didn't want to go in. Had to add a little grease to the sides if the sensor stem then it went in. Thanks for the video
Good video. Nice clear look at the process. I have a 2015 VW Passat and it looks to be the exact same. I changed mine out yesterday and it did not want to come out. After multiple tries it finally broke off and left the stem in the hole. Finally got it out and went to place the new one in and it didn't want to go in. Had to add a little grease to the sides if the sensor stem then it went in. Thanks for the video
WOW finally a video that isn't "So I plug in my $800 VDS Scanner" thanks bruv!
Just performed that service on my rear wheels 🛞, now looking to do the fronts. Took sometime to clean up those grimes
Repect mi G..you saved me some bread..blessings
5mm hex or t30 torx bit?
what year is your VW CC?
Nice job
Where did you purchase the sensor
Where are the front wheel sensors located? I cannot find them.
Can you use any abs sensors on either driver or passenger side or are they different?
No, all four wheels are different.
Do you disconnect the battery to reset the computer after everything?
Yes, and you touch the battery cables after disconnecting, touching the positive and negative wire connectors, without the battery.
What computer and software did you use that told you it was right rear sensor
Autel scan tool
🔥
if you use the car stand like that you're soon going to find out why you should not use it like that
I replace all of my sensor and and light still shown
Check the hub it self to see if the abs ring still intact