I'll share with you the best tool I've found to remove badging and emblems from a vehicle, especially on a fairly new truck while the adhesive is pliable- use fishing line. Preferably 10-15ib. It acts like a knife to remove the badging without a pry tool. Slide it behind the emblems and work it back and forth slowly pulling downward. Don't work it too fast or you'll snap the line from the friction. I also recommend doing it in the sun or just apply a little heat to soften the adhesive. If you try my process and like it, please let me know. Thanks.... hope you find this trick very helpful
Hey truck is awesome. Question do you get any road noise at all from those tires? I gotta get ride of my ridge grapplers. They are to loud! I want no noise!!
Loved the video, in the process of installing LED 1500 hood badges. You mentioned you use the first pry tool on the end of the "5.7" section, but when you completed the step you slide the pry tool first under the "H" word and then use the other pry too to lift up. Does it matter? I just don't want to mess up the OEM ones.
Yo Man What size Tires are those and what's the name of rims I really like them. I have a 19 Ram Delmonico Red and I'm blacking everything out on mine! Thanks
I saw you have an aftermarket Cold Air Intake System. Is there a benefit to have that? I have been reading a lot and there are definitely mixed feelings but ultimately found it doesn't make a difference.
It’s not so much a power mod. Although it does yield some minor power and fuel mileage performance improvements it doesn’t negate the initial cost solely based on power. It’s more of an aesthetics mod in my opinion. Although it does provide ease of filter maintenance ( 100k intervals) while producing cleaner air into your engine. And I forgot to mention it sounds amazing 🔥 If you’re interested in one let us know!
About to replace all my emblems with similar Black/White painted and this video is perfect. I ordered the same pry tools. What kind of cleaner was in your spray bottle that you use?
@@so5thgen Thanks so much! I re-did all emblems this weekend and your video was so helpful! Yours was the only one that showed how to remove the 1500 Hemi 5.7L Badge. Big fan of the channel as well.
Very nice!! Like you're wheels. Hell I like the whole truck. What's the offset on your wheels and size of the tires and is it leveled? I have a 2020 Warlock I'm sure I can just order the tailgate badge as I don't have badging on the hood.
I have a 22 Ecodiesel. Of course the hood badges say so. Does anyone make a replacement emblem that doesn't designate the engine on the badge in chrome? Google is no help. I don't see one out there.
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to if this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
There shouldn’t be any rubbing but if there is it will only be at full lock in reverse. You could just trim off a little of the plastic wheel liner. I have the 2.5” MotoFab level and did not need to change the control arms. The angle on the ball joint still looked about the same as stock.
Those color matching emblems are sick! Great choice.
I work at a vehicle wrap shop and we use a steamer to remove emblems. Much safer then a heat gun and works great
I agree! But I wasn’t trying to save these nor did I have a steamer. I should probably order one they do come in handy
What brand of steamer?
@@timmcgrath6496 see the link. You do need an account to purchase it but I think there are similar units available. Like I said it works great.
Man the easiest way to remove those emblems. Did both under a minute. Thank you
Bought the same pry bar kit and used the video for reference, worked like a dream!!!
I'll share with you the best tool I've found to remove badging and emblems from a vehicle, especially on a fairly new truck while the adhesive is pliable- use fishing line. Preferably 10-15ib. It acts like a knife to remove the badging without a pry tool. Slide it behind the emblems and work it back and forth slowly pulling downward. Don't work it too fast or you'll snap the line from the friction. I also recommend doing it in the sun or just apply a little heat to soften the adhesive. If you try my process and like it, please let me know. Thanks.... hope you find this trick very helpful
Stormtrooper look, lovin it....got myself the vader look going on. Hood and tailgate badges are next!!!
Rev Auto at the 11 minute mark!!! Best company!!!
We use to run them a lot we’ve since swapped to renegade
They got that fluid film in there through those same access ports under that badge
Hey truck is awesome. Question do you get any road noise at all from those tires? I gotta get ride of my ridge grapplers. They are to loud! I want no noise!!
love your emblems. your truck looks nice with them.
Thanks!
I want these so bad for my new white 1500 but they’re SO EXPENSIVE
Awesome job! You clearly take pride in your work and your trucks!
Can't thank you enough! Look forward to the future and working together!
Painted mine just the opposite of yours... The badges look so good in black and white either way you do it 👍🏼👍🏼
Just used this technique to replace new hood badges
Rear badge looks sick asf
Have they made lighted emblems yet when they do thats when I will buy them. If anyone knows let me know where to buy them and who sells them.
I can't get to the store in the description. Could you help me out? I'm trying to match some polished aluminum wheels.
Super clean truck
Do they sell the hood emblems that light up?
Loved the video, in the process of installing LED 1500 hood badges. You mentioned you use the first pry tool on the end of the "5.7" section, but when you completed the step you slide the pry tool first under the "H" word and then use the other pry too to lift up. Does it matter? I just don't want to mess up the OEM ones.
shoudnt matter
How do I order those white badges I want them for my 2021 Ram
Retroshopllc
Thanks for the knowledge. This video is very helpful
I must say that looks great!! 👍👍
My 19 bighorn hood fills with water thru these badges.
I just redid the 3rd light leak that was soaking my interior,love the truck but the seals suck
nice set up with the tires. what set up u use too look good i have a 2020 limited.
Hey, where can I get the emblem package, I have the same color truck
Does this method work on the rebel badges that are further up on the center of the hood ?😊
its just too bad there isn't a black liner behind the back emblem to keep the water to get behind it..otherwise very nice bro..
That looks bad ass, man! 👍
How do I get this doesn't show it on the website
Where did you get those mirror covers ? I have the same truck been looking cant find them anywhere for that style mirror
eBay if you need help locating them let me know
Hi there! 👋 what size of wheels and tires are you using?? They look nice
Currently running 22x12 on 305/45R22
Any upgrades to the key fob? The chrome on mine is coming off from carrying a knife in my pocket
There’s a few companies that make covers. But if it’s super scratched I would recommend replacing the housing if it bothers you
Yo Man What size Tires are those and what's the name of rims I really like them. I have a 19 Ram Delmonico Red and I'm blacking everything out on mine! Thanks
Wheels are pure grit PG102 20x12 they also make a 22x12
I would like to do my longhorn like this but my white is a pearl white so I might have little problem
I just got a new 2022 1500 Bighorn and I was looking for the 1500 5.7 liter badges that light up do they make them?
Yes they exist - quick google search you’ll see them
I tried going to the website to find those emblems and couldnt find them. How do I get some? I want those exact ones
Retro shop LLC on IG
How did you black out your grill? I'm in the process of doing that now
Pull the inserts out and wrap our paint
What lift are you running? Love the stance!
2.5” level
I saw you have an aftermarket Cold Air Intake System. Is there a benefit to have that? I have been reading a lot and there are definitely mixed feelings but ultimately found it doesn't make a difference.
It’s not so much a power mod. Although it does yield some minor power and fuel mileage performance improvements it doesn’t negate the initial cost solely based on power. It’s more of an aesthetics mod in my opinion. Although it does provide ease of filter maintenance ( 100k intervals) while producing cleaner air into your engine. And I forgot to mention it sounds amazing 🔥 If you’re interested in one let us know!
To save your OEM badge, hear from the rear!!!
Man that looks awesome!!
About to replace all my emblems with similar Black/White painted and this video is perfect. I ordered the same pry tools. What kind of cleaner was in your spray bottle that you use?
Glad I could help, if have you rewatch my video but I’m pretty sure it was just a spray wax
@@so5thgen Thanks so much! I re-did all emblems this weekend and your video was so helpful! Yours was the only one that showed how to remove the 1500 Hemi 5.7L Badge. Big fan of the channel as well.
Very nice!! Like you're wheels. Hell I like the whole truck. What's the offset on your wheels and size of the tires and is it leveled? I have a 2020 Warlock I'm sure I can just order the tailgate badge as I don't have badging on the hood.
They are 20x12 with 305/50R20
@@so5thgen Thanks! I appreciate the reply.
Much nicer looking without the cheesy chrome on white.
For sure!!
I love the white badging. I have the 2021 badging with the e torque on it. Where can I get my badges in the ivory white tri coat pearl. Thanks
Thanks! And message RetroshopLLC on Instagram! They can do any custom colors on any make or model
@@so5thgen I don't do the Instagram thing. Is there another way:)
retroshop.us/
@@so5thgen appreciate it:)
Great video. What type of cooled air intake u install on yours. I have a 2020 laramie what to do an intake
Victor Garza I’m running a Volant Performance intake. Made by Corsa Performance
Thank you
Those are 🔥🔥🔥
I have a 22 Ecodiesel. Of course the hood badges say so. Does anyone make a replacement emblem that doesn't designate the engine on the badge in chrome? Google is no help. I don't see one out there.
They look great. One small thing is it’s Retroshopllc, not customs. Lol
Thanks buddy and I know! Just slips out that way haha ** RetroShop LLC Custom Lighting
Looks great bud.
When are yours getting ordered!?!
How do i go about getting some color matched to the delmonico red?
Reach out to Jeremy at RetroshopLLC on Instagram and tell him we sent you
That’s sick!!! 👍😝
Can you fit a 2020 badge bezel on a 2019?
I need these for my 2020 1500 classic. Tried to find them. Any help?
Retroshopllc
Where did you get the emblem? For the tailgate
Jeremy from Retroshop LLC
Can you give me the sight again please The one at the end of the video did not work.
retroshop.us
How much are those to be color matched? Super curious
It’s roughly 500$
Where did you order the White badges from?
Retroshop
@@so5thgen I need more information on how to place an order 👍
What did you used to clean the surface
Just purchased a 2019 Ram 1500 2wd new body style and I plan to put on a 2.5 front leveling kit with 35x12.5 tires on 18x9 wheels! Does anyone have any knowledge as to if this would cause any rubbing? If so what can be done to combat that issue? Also, will I absolutely need to purchase to control arms? And why? (First time truck buyer & first time dealing with large wheels/tires and any type of leveling kit)
There shouldn’t be any rubbing but if there is it will only be at full lock in reverse. You could just trim off a little of the plastic wheel liner. I have the 2.5” MotoFab level and did not need to change the control arms. The angle on the ball joint still looked about the same as stock.
I’ve got a 2021 3500 and just got a 2.5 bilstein leveling kit with 35x12.5x20. Rubs like a son of a bitch.
What air intake do you have and did you get more mpg with it if so how much.
Volant performance made by Corsa performance if you use our discount it’ll save you 10% “So5thgen”
I got a CAI and mid muffler delete and picked up 3 mpg
That’s slick!
Awesome job. Thank you.
Sweet!!!
I can’t find the Instagram page and I want a set of these super bad
RetroshopLLC on Instagram or FB
plastic pry tools can still damage the paint!
What size and offset are your wheels?
I’m this video 20x12 -44 currently running 22x12 -44
Where did you get those.... Unreal
Retroshopllc
What is the size of the rims
How much did you pay for the emblems painted? That truck is 🔥🔥🔥
425$
where to buy the painted emblems?
Retroshopllc
Where do I get these!!!
Retro shop LLC
Where did you get the emblems from?
Retro shop llc all the info is in video description
I think this look pretty good but idk if they are worth $450 bucks
Makes the truck stand out 🤘🏻
Awesome .
This turned out perfect!
@@so5thgen what did u do to your taillights? Never saw a video
Frankford Garage they are wrapped Jon from AutoAlterations hooked it up
what lift you got?
2.5” leveling
How much was it to get those exact emblems
375-400$
@@so5thgen damn thats pricy
Where did you get these? Looking for the same for my 3500 please??
Too bad they don't advertise them on their website
Message Jeremy on IG retroshopllc
Price on these emblems please
450$ ish from retroshopllc
Can anyone answer me on this i have a 2017 ram and i want to kno can i install the 2019 tailgate emblem on the 2017 ram?
Ryan Jefferson if you give me a few days I can measure my 4th vs my 5th emblem.
@@so5thgen thank u
Hey wats up you have update?
Ryan Jefferson I’m currently out of town I can’t get the dimensions at the moment
Where's the paint protection tape from?
You mean painter's tape?
Nice work. Question: How the heck are you averaging 17.1 MPG????
Tom Arnold cold air intake, tuning, light tires and rims
i average 17.6 with 285/60/20 nitto grapplers with no intake or tunning i recalibrated my speedo though
@@bull5919 I get 12-13 on 265/65R20s
I dare you to punch the tail emblem
as break your fist
Danil Smith deal
@@so5thgen good job!
😍🤩!
huge difference!
Wow that rear emblem removal looked miserable
Wasn’t too bad just time consuming ha
@@so5thgen I guess I’m just comparing to putting the black vinyl overlay decals on my chrome emblems lol
I dented my tailgate r.i.p
Removing the badge!?
so5thgen yup, because I rushed it
What’s the price of this kit?
DJ Cavalcanti roughly 400$ also depends on options
@@so5thgen he can keep those emblems for $400
Where did you purchase those badges?
Mickey Claudio retrocustom llc talk to Jeremy
@@bull5919 LMAO ikr.....Jeremy is a cool dude though, he does some amazing work!
I tried getting this from these guy and was told to go to a paint shop! 👎🏻
Sorry to hear hopefully you contacted the right phone #