I have a Hikvision NVR. Yesterday it started beeping 3 long beeps and 2 short beeps. I rarely log in directly to the NVR. Usually through web browser. When I logged in directly, I see that the menu is now NVR 4.0 and a totally different look. Used to look like the menu that you show in video. right-click with the mouse no longer brings up the menu. Also, now cameras are now not being picked up. Seems that somehow, motion detection has been turned on on all cameras with entire view blocked out and some IP configurations for the cameras have changed requiring reprogramming. Does Hikvision automatically change the NVR menu?
Thank you! My dvr has been beeping for days because my hard drive has an error. Did not get a chance to check it as yet but as least that annoying sound is gone.
Would this beeping also happen if the internet connection dropped even temporarily?. Also when I checked HDD menu it said error raw hard drive full any help appreciated.👍
The beeping starts according to the configuration. It’s possible to setup the NVR to beep when there’s a disconnection or to alert when the disk is full. Check the configuration and also make sure your NVR is set to overwrite old videos so it will never get full.
i had a similar problem....turns out the power supply is damaged : not giving enough power to spin up the hard drive, please replace the power for the DVR
I have a Hikvision NVR. Yesterday it started beeping 3 long beeps and 2 short beeps. I rarely log in directly to the NVR. Usually through web browser. When I logged in directly, I see that the menu is now NVR 4.0 and a totally different look. Used to look like the menu that you show in video. right-click with the mouse no longer brings up the menu. Also, now cameras are now not being picked up. Seems that somehow, motion detection has been turned on on all cameras with entire view blocked out and some IP configurations for the cameras have changed requiring reprogramming. Does Hikvision automatically change the NVR menu?
I do not have these settings, specifically “exceptions”. Any idea how to fix this beeping???
Thank you so much. Annoying sound gone
😊😊😊
Thank you! My dvr has been beeping for days because my hard drive has an error. Did not get a chance to check it as yet but as least that annoying sound is gone.
Mine has the same HDD error I think how do I solve it ?
finally someone actually help me jeez this dam thing is annoying and load even after putting duck tape over the speaker thingy
Hello my friend. Will it work on the time attendance iMVS 4200 Ac?
Not sure,please check the manual.
Would this beeping also happen if the internet connection dropped even temporarily?.
Also when I checked HDD menu it said error raw hard drive full any help appreciated.👍
The beeping starts according to the configuration. It’s possible to setup the NVR to beep when there’s a disconnection or to alert when the disk is full. Check the configuration and also make sure your NVR is set to overwrite old videos so it will never get full.
Brother thanks but haddrive not detected err is coming
i had a similar problem....turns out the power supply is damaged : not giving enough power to spin up the hard drive, please replace the power for the DVR
Thank you so much for this
Omg thank you 😊
Thank you 🙏
Thank you so much 🙏
great thanks ❤
You're welcome 😊
Thanks a lot sir
Need good explanation
Which part?
Hikvision cameras are the worst 😢😢😢😢
Can't understand him.
سو پاس