I’ve built a front spear and a rear spear for my John Deere, and I enjoyed building both of them. I liked the fact that they’re built how I wanted them, and I didn’t have to settle for how one was mass produced. I like your design, looks like it will do good.
That Miller 211 is a great welding machine, especially with the Argon/CO2 gas (no smokey/spattering flux core). You gotta love that welder. Nice job on the welds, too, Evan.
Evan, I am amazed at the way you look at a job and then jump into it and make it work, even though they sent the wrong parts, you still made it work for you and that is a real talent to be able to do things like that. The hay spear looks real sturdy and should last a long time.
Come to the conclusion there is nothing you can't build if you put your mind to it you're awesome so talented and you save a lot of money building your own stuff
My dad also had a rear mounted bale spear on his 3 point It was made with one larger spear at the top of the frame and two smaller ones that was lower one in each side .worked really slick
Good build! One tip when dropping the bales, you may have to put down pressure with the loader as you back out, then as you see the spears are coming out you can lift the loader a bit and back on out. You can do this in one continuous motion, just takes a little practice - you’ll figure it out pretty quick.
In my experience, make sure the spears are level. I noticed on the 2nd bale the spears were tilted down not allowing the bale to come off. Great job building them! I love this kind of work
The hay spear turned out great and you'll get on to setting the bale down level so the spears will slide out easier. First time out with it you did okay . That will be a handy addition to your equipment. Might make an extension handle for the levers to keep from skinning your knuckles? Thanks for sharing. Fred.
My dad had old grader blades he would bolt each one to the loader bucket,it worked really slick picking up big bales those old graders blades are really tough.
LOVE your channel - You and Reb. have done a GREAT job on your property!! On the hay spear-the spears go on the BOTTOM of the brace-that way when you roll the bale back for transportation it rest on upper part of the frame!! Yours will work for light bales. If it works for you-then it is perfect!! Keep up the great videos - I do not miss a one.
Evan, when MIG welding with shielding gas, you use the 'push' method, meaning as a right-hander, you would be welding from right to left. This ensures the gas shields the weld.
Enjoyed watching your video on making that hay spear. I would like to be able to make one, but that’s not one of my talents. 😅. I just recently bought a TYM 574 cab tractor and love it. Great fun getting out here on the farm bushhogging. Really enjoy watching all your videos. Keep ‘em coming.
It appeared when trying to remove the bales you didn't lower the attachment where the weight of the bale was neutral (seemed too high) and initially didn't have the spears level. Great job of fabricating and building. Weld some extension on top of the handles off set on the back side of each for saftey.
As stated before the spears are much better on the bottom. For one they double as a pallet fork but also bales are much easier to pick up and put down because you are entering the bale below the center of gravity. Nice work though!
just a thought you can weld a square over a long pipe with some chain rings to put cable winches on to make a long extension pole boom that you can pin into the receiver hitch and the hooks
Great job with the build and explaining as you went. I was thinking about going with the plate you went with but my plans for my attachment plate is for multiple attachments. First to attach will be pallet forks, then my single bail spear attachment, then my 15 in wide trench excavator for French drain and such. Not knowing what else might come up with, I went with 1/2 in solid plate. At 63, plate by itself is more than enough weight. I'll have to weigh it with no attachments.
Suggestion - Get a set of fiberglass blankets from Harbor Freight for when you are using that metal chop saw. I almost burned down my shop with sparks from mine. I was lucky to notice the smoke from the smoldering fire before I left. Might not be an issue for you now because it's a new shop but as you get dust or sawdust laying around it might.
Evan very beefy build. Nice welds. To prevent blowouts welding do a non welding walk thru making mental notes of thinner metal and do these welds as a separate job turning down the settings. This mount will serve you well. Use anti seize in the hay spear sleeves.
Looks great Even well done. When you make something from nothing it’s amazing how you put your time and effort into something and make it look like one made from a shop.
You did a great job on that project. I think you will find that putting the "spears" on and off when you want to use the hitch will become old. BUT it does look great and well built.
Great project Evan, along with doing something you enjoy. Reading through the comments I do find it strange when many seem to criticize your build, ignore if the design suits your needs that's what matters.
Titan makes a bucket fork with bale spear attachments and 2 inch receiver also. I think it even came with a couple hooks. It was just on sale for around $600 I believe.
Looks good, I think I would have put the spears on the bottom though and it could have doubled as a pallet fork.
agree....100% for many reasons
He already has a set of pallet forks I believe
Maybe it's not too late to drill two new holes in the bottom to create that option.
@@lawrenceb.3349 as is the metal on bottom is to small, it will take some engineering to accommodate the quick attach accessory that he bought.
I agree
Keep your spears level when going in and coming out of the bail!! Go watch the forklift driver at your shop, will help you learn...lol
Looks great! And I’d say your welds look just as good as many “factory” welds I’ve seen. Nice job!
Love your honesty.
With practice you'll be able to do anything thing you want with that spear, and you built it strong, good job.👍
I was just looking into making one myself
Evan while you are at it put another bar on the bottom so you can switch
I’ve built a front spear and a rear spear for my John Deere, and I enjoyed building both of them. I liked the fact that they’re built how I wanted them, and I didn’t have to settle for how one was mass produced. I like your design, looks like it will do good.
I like it. You make a good staff. All ways. "bravo" 👏👏👏👍
Love the video Evan on the quick attach hay spear .
That Miller 211 is a great welding machine, especially with the Argon/CO2 gas (no smokey/spattering flux core). You gotta love that welder. Nice job on the welds, too, Evan.
Evan, I am amazed at the way you look at a job and then jump into it and make it work, even though they sent the wrong parts, you still made it work for you and that is a real talent to be able to do things like that. The hay spear looks real sturdy and should last a long time.
Flexibility and improvising always wins be day!
You are a perfectionist Nice job!
Looks. Satisfaction of doing it yourself 👍
Come to the conclusion there is nothing you can't build if you put your mind to it you're awesome so talented and you save a lot of money building your own stuff
very nice project and presentation, thank you!
My dad also had a rear mounted bale spear on his 3 point It was made with one larger spear at the top of the frame and two smaller ones that was lower one in each side .worked really slick
I think it looks great. I am impressed.
Good build! One tip when dropping the bales, you may have to put down pressure with the loader as you back out, then as you see the spears are coming out you can lift the loader a bit and back on out. You can do this in one continuous motion, just takes a little practice - you’ll figure it out pretty quick.
Good job Evan!
Even, hate to tell you the bale spikes should have been on the bottom you will find out way over time
In my experience, make sure the spears are level. I noticed on the 2nd bale the spears were tilted down not allowing the bale to come off.
Great job building them! I love this kind of work
You gotta be proud of THAT !!!!!!!
The hay spear turned out great and you'll get on to setting the bale down level so the spears will slide out easier. First time out with it you did okay . That will be a handy addition to your equipment. Might make an extension handle for the levers to keep from skinning your knuckles? Thanks for sharing. Fred.
You do make a excellant Farmer, a man of all means.
That's the ideal bale speer. Once your speers get shined up those bales will slide right off. Good deal!
Don't worry it gets easier with practice. I've found that the spear seems to go in better if it is angled down just slightly.
I think it is great you made a 3 in one piece out of it. It looks great. Thanks for sharing. Y'all have a Blessed day.
You did a good job on it nice work
I think this is a great job well done. Practice with the spear & you will get the hang if it.
Try taking the paint off the spears, and maybe dropping the spears lower down to see above the bale.
Great job' enjoyed the vlog thank's.
Nice build. I’m envious 😀
Great build. Grease on the bale spikes before they have a chance to stick will help remove them from the brackets.
Looks Fantastic Bro!!
Evan, you’re very innovative in your design and detail. Good job!
Your fabrication skills are great!
Just try putting the spikes just below centre in the bale not above, should come on and off easier. Worth a try.
Looks great Evan 🤙
Excellent work!
🇨🇦 HAPPY CANADA DAY. You have a great day. 🇺🇲 Your Day is Monday. 🚛🚛🙏☝️❤️
My dad had old grader blades he would bolt each one to the loader bucket,it worked really slick picking up big bales those old graders blades are really tough.
I think its brillaint ,plus u saved money and i bet it will last longer,its a plus u enjoyed doing it xx
Good job I like that will help you on the land at your homestead love it from steve c from state Oregon
I've said it before. Yours is one of the best channels on TH-cam keep up the good work sir.
LOVE your channel - You and Reb. have done a GREAT job on your property!! On the hay spear-the spears go on the BOTTOM of the brace-that way when you roll the bale back for transportation it rest on upper part of the frame!! Yours will work for light bales. If it works for you-then it is perfect!! Keep up the great videos - I do not miss a one.
Evan, when MIG welding with shielding gas, you use the 'push' method, meaning as a right-hander, you would be welding from right to left. This ensures the gas shields the weld.
Enjoyed watching your video on making that hay spear. I would like to be able to make one, but that’s not one of my talents. 😅. I just recently bought a TYM 574 cab tractor and love it. Great fun getting out here on the farm bushhogging. Really enjoy watching all your videos. Keep ‘em coming.
LOOK GOOD
I'm still looking forward to meeting you , at the Mount Vernon Rural King.
It appeared when trying to remove the bales you didn't lower the attachment where the weight of the bale was neutral (seemed too high) and initially didn't have the spears level. Great job of fabricating and building. Weld some extension on top of the handles off set on the back side of each for saftey.
Well done Evan
As stated before the spears are much better on the bottom. For one they double as a pallet fork but also bales are much easier to pick up and put down because you are entering the bale below the center of gravity. Nice work though!
I was just gonna say. i second that
I thought you would like real MIG welding. The welds look very good to me. Thanks for sharing.
Evan, you did a great job!
Sounds crazy, but the bails will slide easier once the paint comes off.
You are a very handyman 👍👏👏👏 Get a few fire extinguisher to put around the farm. Just a suggestion
Great welding job, Evan. It will last a lifetime,
just a thought you can weld a square over a long pipe with some chain rings to put cable winches on to make a long extension pole boom that you can pin into the receiver hitch and the hooks
Great job with the build and explaining as you went. I was thinking about going with the plate you went with but my plans for my attachment plate is for multiple attachments. First to attach will be pallet forks, then my single bail spear attachment, then my 15 in wide trench excavator for French drain and such. Not knowing what else might come up with, I went with 1/2 in solid plate. At 63, plate by itself is more than enough weight. I'll have to weigh it with no attachments.
Maybe one at the top and the other at the bottom. Good job! I like it.
Very nice job Sir.
Nice work!
Awesome job Evan! Looks amazing.
Suggestion - Get a set of fiberglass blankets from Harbor Freight for when you are using that metal chop saw. I almost burned down my shop with sparks from mine. I was lucky to notice the smoke from the smoldering fire before I left. Might not be an issue for you now because it's a new shop but as you get dust or sawdust laying around it might.
Evan we always had one spear in front n one in back so we could carry 2 and they come out easier
You did a great job on this project
Great job,nicely done looks strong. Great vido . Evan keep up the great job
Good job!.. looks great and strong!💪🏼
Thank you!
Everything prices went through the roof, your doing an outstanding job. Love watching all your videos, keep them coming please. Thank you
Great job Evan very useful finished product! Nice shots on the fabrication
...LOOKIN' GOOD, NICE JOB, THAT SPEAR SETUP SHOULD GET 'ER DONE, KEEP SAFE...
Looking good.
Looks great, matches the tractor perfectly... plus might come in handy during a zombie apocalypse :D
Great job Evan. It certainly feels good when you can look at something and say. I fabricated that!!
A good old Aussie saying..."it looks just like bought one!"
If you wanted to add forks you could probably fab up a pair that would hang over the top of your bracket. Looks great!
Good job Evan! Time to retire and stay home and do stuff in the garage!
Great job your a master builder love your videos Thank you
It really turned out nice good job
Evan very beefy build. Nice welds. To prevent blowouts welding do a non welding walk thru making mental notes of thinner metal and do these welds as a separate job turning down the settings. This mount will serve you well. Use anti seize in the hay spear sleeves.
Nice build, Evan! I really enjoyed it. It turned out really nice.
Great job Evan, You built the way you plan to use it. Great planning. The wielding was good, it get better with time.
Evan you did a great job on the hay spear look factory.
Great job 👍💯 everything looks perfect for your homestead 💯👍💚🌱✌️
Looks great Even well done. When you make something from nothing it’s amazing how you put your time and effort into something and make it look like one made from a shop.
You did a great job on that project. I think you will find that putting the "spears" on and off when you want to use the hitch will become old. BUT it does look great and well built.
So glad you like the welder.. Very nice job on moving the bales. Those hooks would serve well for dragging logs out of the woods with the TYM.
Great project Evan, along with doing something you enjoy. Reading through the comments I do find it strange when many seem to criticize your build, ignore if the design suits your needs that's what matters.
Great job.
Titan makes a bucket fork with bale spear attachments and 2 inch receiver also. I think it even came with a couple hooks. It was just on sale for around $600 I believe.
Great work Evan, you always make things very well.
Maybe the spears will "shine up" with use and will slide easier.
I think it looks and works great. Always wanted to learn to weld. Thank you
Looks factory you did a good job on it and good thinking putting the end caps on will keep wasps and other insects out
From what I could see your welds look good Evan Don't be so hard on yourself
Nice job
Nice welding job 👍