Awesome Allen !! If we were neighbors I'd be over there helping you out ! I wouldn't mind the noise, I have a fairly good stockpile of earplugs from construction jobs that I used to work !! 😁😁😁👍👍🤜🤛✌
Brother I've been binge watching your videos and I've got to tell you that you have came a long way not only in fabrication but in life as well I'm glad you got your family in church an that the lord has blessed you and your business keep up the faith and hard work
You have inspired me to learn how to weld and start building my own pit down here in New Zealand. Your a master of your trade and no doubt you make things look far easier than they are for a learner but we all got to start somewhere. You have given me tonnes of design inspiration. Keep up your amazing work!
Great video Allen, as a fabricator in a small engineering shop I do a lot of repair work and a good dose of new too :-) love your work bro especially the side burners or reverse flow (-: just also say sweet skills on da oxy torch it's not easy to free hand straight lines like that. Keep up the great work
Love your videos chief, your wrk is excellent. I’m going to give you a tip for working quicker (I was something in the cheffing world, back in the day), as everything I ever did was to speed things up. Try to get lots of the same job done at once. Say you’re cutting tubing, cut ALL the tubing at once (as much as you can). Then move onto the next job, all the plate. All the handles welded etc, you get the picture. Speed comes from repetition and you can build up more speed sticking to one job at a time. It’s all in the prep work, just like in a kitchen. Keep going anyway, you’re doing fantastic stuff.
Great videos Allen! Do you use hot rolled steel for all of your grill grates? The coal basket and grill grates almost look like stainless steel after they're installed (Around 16:00 in this video), or at least look like bare metal without mill scale. If these are HR steel, how do you get all of the mill scale off? When welding them together I can clearly see there's mill scale still on the square tubing. Keep up the good work!
Love Your Videos, Not A Pro Welder Like You, Building A 20 x45 casing, With A 20x20x20 Firebox, What Size Opening Would You Recommend For Firebox to Cooking Chamber
Imagine that more great lookin projects completed by Allen, brother you've got some skills. Where do you get your clamp down handles? Keep up the great work my friend.
Hi Allen. since you weld often outside, how much wind can blow before you experience problems with the Gas not covering well the welding pool? Thanks in advance for the answer and keep up with the good videos! Sart0
Great work. Allen. Is this your full time job or do you do this as a sideline? You need your own shop and a retail store. Folks will beat a path to your door for quality.
Hi Allen, I saw a smoker that you made, it's called reverse flow, traditional offset smoker duo, I really love that smoker, is there any chance of me asking you for the plans on how to build one for myself please if it's ok with you.
When it comes to the math, what do you use to find those angles? And if there's a source out there that shows the angles can you link it. I am one that wants to play around with this but am unbelievably horrible at math.
I don't see how you get so much done without an indoor shop. If I ever plan to weld outside, it could be sunny all week until the day I plan to drive home and work. I'll make the 12 Mile drive from work to home and as soon as I get out of the truck it will start raining.
You are not a welder, not a iron worker, not a country smoke builder. You are a true artist! Great art.
Thanks, I appreciate that!
Hey Allen.
You talk about getting faster with getting these done sooner.
You put out an excellent product. Don't suffer quality for quantity.
One of the best channels on YT👍🏽👍🏽
Awesome Allen !!
If we were neighbors I'd be over there helping you out ! I wouldn't mind the noise, I have a fairly good stockpile of earplugs from construction jobs that I used to work !! 😁😁😁👍👍🤜🤛✌
Great video Mr Allen thank you for sharing your projects with me.
Brother I've been binge watching your videos and I've got to tell you that you have came a long way not only in fabrication but in life as well I'm glad you got your family in church an that the lord has blessed you and your business keep up the faith and hard work
Brother you are good God Bless
You have inspired me to learn how to weld and start building my own pit down here in New Zealand. Your a master of your trade and no doubt you make things look far easier than they are for a learner but we all got to start somewhere. You have given me tonnes of design inspiration. Keep up your amazing work!
Pure magic, love watching your videos, i love the added cooking
I always look forward to your next video. Your work is awesome!
It’s nice to see you have a new welder and plasma. That’s gotta save time in itself! Weld on and keep the clips comin!!
For your consideration, placing the shelf 2inches below the chamber door would possibly allow unobstructed opening.
GoFundme for allen to get a nice steel building to build in?
This dude is awesome. Count me in. 💰
Is it up already? I don’t have much but I will chip in from Herzegovina. :)
mmm !! nice to see some cooked product , I m thinking of making my own bbq you showed me lots of tips thanks
Found my new favorite channel. Nice work man.
Those ribs made me hungry. And I was eating dinner while watching! Nice work Allen!... On everything
you can't work without a roof above your head...you need a workshop asap....keep going,nice videos!!!
Your a busy man Al. Stuff everywhere. Love it mate.
Great video Allen, as a fabricator in a small engineering shop I do a lot of repair work and a good dose of new too :-) love your work bro especially the side burners or reverse flow (-: just also say sweet skills on da oxy torch it's not easy to free hand straight lines like that. Keep up the great work
Great video Allen keep up the great work and those ribs got my mouth watery and now craving some bbq.
Love your videos chief, your wrk is excellent. I’m going to give you a tip for working quicker (I was something in the cheffing world, back in the day), as everything I ever did was to speed things up. Try to get lots of the same job done at once. Say you’re cutting tubing, cut ALL the tubing at once (as much as you can). Then move onto the next job, all the plate. All the handles welded etc, you get the picture. Speed comes from repetition and you can build up more speed sticking to one job at a time. It’s all in the prep work, just like in a kitchen. Keep going anyway, you’re doing fantastic stuff.
Fire pit was nice. I enjoy watching you make grills but that meat you took off the grill was a close 2nd to the grill👍
Brother, your work is superb. Awesome work. I’d love to buy one
Allen you are a one Man show, I enjoyed the video.
Grate work man they look good,all the love from Romania.
Andrei I’ve been to Brasov and Rasnov. Also Vlads Castle. Beautiful over there. I love it. You’re a lucky man!
Great work! Wondering why the stack is on the same side as the fire box ? Thought it was supposed to be on the opposite side to draw the heat across
Man!! I love your craft!!
Great videos Allen! Do you use hot rolled steel for all of your grill grates? The coal basket and grill grates almost look like stainless steel after they're installed (Around 16:00 in this video), or at least look like bare metal without mill scale. If these are HR steel, how do you get all of the mill scale off? When welding them together I can clearly see there's mill scale still on the square tubing. Keep up the good work!
What size off expanded metal do you use for the racks in the smokers and the fire pits? I enjoy watching your videos. You are very talented.
It's called 3/4" #9, about 1/8" thickness
Man I sure wish I lived around u I would love to help build ur stuff. Nice work
That bbq is a BEAST! you made something very cool, it is just perfect! when can i come over for a try out??? LOL
That LSU grill is stupid sick 🔥😍
Love Your Videos, Not A Pro Welder Like You, Building A 20 x45 casing, With A 20x20x20 Firebox, What Size Opening Would You Recommend For Firebox to Cooking Chamber
Keep up the awesome work Allan. Badass
Imagine that more great lookin projects completed by Allen, brother you've got some skills. Where do you get your clamp down handles? Keep up the great work my friend.
Hey, nice work. Do you use net made of steel or simple iron net?
Bad ass work Allen!! Where are you from?
Hi Allen. since you weld often outside, how much wind can blow before you experience problems with the Gas not covering well the welding pool?
Thanks in advance for the answer and keep up with the good videos!
Sart0
Congratulations on the beautiful work.
How about you change for Brazil Mr. Allen
How much do these pits run for??? Awesome work BTW!!!!!!!
Great work. Allen. Is this your full time job or do you do this as a sideline? You need your own shop and a retail store. Folks will beat a path to your door for quality.
Parabéns Allens adoro seus vídeos um abraço Luís de Jundiaí SP Brasil 🙋✌👍👏
Doing great man , good production .
That’s just awesome work!
Hi Allen, I saw a smoker that you made, it's called reverse flow, traditional offset smoker duo, I really love that smoker, is there any chance of me asking you for the plans on how to build one for myself please if it's ok with you.
So all this is 0.030 flux core? Looks pretty good, Lincoln wire?
That was hard wire, er70s6, Washington alloy wire
How much for the last reverse flow in this video? That great work.
When it comes to the math, what do you use to find those angles? And if there's a source out there that shows the angles can you link it. I am one that wants to play around with this but am unbelievably horrible at math.
I don't see how you get so much done without an indoor shop. If I ever plan to weld outside, it could be sunny all week until the day I plan to drive home and work. I'll make the 12 Mile drive from work to home and as soon as I get out of the truck it will start raining.
what kind of welder are you using ?
Whew I'm just watching ya do another great couple builds and how ya figure ya work and in tired
Can’t wait to see the bigger pit
What does this one run?
That's about the size I need
Allen question do u use high temp flat black for all your pits n smokers?
Yes, its rust-o-leum high temp paing
Where could I find the LSU STENCILS you have on the fire pit
I’m not sure, I do sell these fire pits though if you want one of those
Appreciate the content
Do you have any or make any gravity fed smokers? If so show me your design please sir. I’m looking for one to purchase.
Dang!!
Nice bro
How much for your reverse flow smoker give me options if you can
Brother, love your work but you really need to be using a respirator when you're spray painting. Your lungs will thank you.
Way to geaux on them ribs
First!
I love your videos but that’s the ugliest fire pit I’ve ever seen. It needs to say Roll Tide! No man you do incredible work. Keep it up!