Thanks a lot. It's absolutely not clear from the paper manual that the double ones need to go in and under the belt. I've been trying to fit them both in, and most did fit easily...
The slope of the slats is reflected in the bed. I bought two beds, both are like this. It's never a flat bed. Some places are high and some are low. I wake up in the morning in pain. I'm considering removing the slats and replacing them with a flat sheet of chipboard. So it will be like a classic box-spring mattress. Do you have such a complaint, are you satisfied?
I have had this frame for about 3 years now. I have no such issues. With these arched slats, the weight of the sleeper should flatten them out. Also, the mattress should absorb any unevenness. I’m 100kg and my mattress is 24cm thick, and I also use a 5cm topper. Are you a very light person and do you use a very thin mattress?
I have the same bed and slats from Ikea. The problem is, how did you put the slated base onto the bed with the plastic screw that are supposed to go between the slats? These plastic white screws don't fit between the slats, because the slats are on a frame. Did you just take them off?
are you talking about screws and white plastic 3 and 4 like the picture in the link? if it is, you have to remove them www.google.com/imgres?imgurl=https%3A%2F%2Fs8.postimg.cc%2Fksg4m0p6t%2FIMG_4714.jpg&imgrefurl=https%3A%2F%2Fwww.ebay.fr%2Fitm%2MKE COMPLETE-SET-OF-SCREWS-AND-FIXINGS-High-Low-Model-Bed-Frame-Nail-DIY-% 2F321704090603 & tbnid = 44DD7vdQaXS_SM & vet = 12ahUKEwjCherdqZfuAhUa-hoKHXD7DR..iDP & hNygGegM = 800% wiDP & hNygGegM = 800% wiDQMidGegU = 1100% wiKHXD7DR & hGNWGM = 800% = 800 20malm% 20ikea% 20vis% 20plastique% 20blanc & hl = fr & ved = 2ahUKEwjCherdqZfuAhUa-hoKHXD7DRUQMygGegUIARCpAQ
Thanks a lot, I was desperate, but now, I got it.
Thanks a lot. It's absolutely not clear from the paper manual that the double ones need to go in and under the belt. I've been trying to fit them both in, and most did fit easily...
Whats The Different Between This & Lönset ?
What's the difference between the two black plastic things where the slats go in?
The slope of the slats is reflected in the bed. I bought two beds, both are like this. It's never a flat bed. Some places are high and some are low. I wake up in the morning in pain. I'm considering removing the slats and replacing them with a flat sheet of chipboard. So it will be like a classic box-spring mattress. Do you have such a complaint, are you satisfied?
I have had this frame for about 3 years now. I have no such issues. With these arched slats, the weight of the sleeper should flatten them out. Also, the mattress should absorb any unevenness. I’m 100kg and my mattress is 24cm thick, and I also use a 5cm topper. Are you a very light person and do you use a very thin mattress?
So with the Leirsund base I don't need the black slide into final attachment on the Songesand instructions?
Thanks so much sir 👍I would like ask question sir
Does that make sound while you sleeping ?
thanks so much sir
yes, I had a noise at the beginning and it left after a month
@@Keitex thanks so much sir
As I don’t use a bed frame but just put the bed bas on the floor. Is it possible to attached the two frame ? Thank you for your answer
Do the strings in the end need to be screwed tightly on the frame?
Merci, il faut prévoir combien de temps au montage ?
une bonne 1/2 journée, bon courage
didn't you fix them on the bed frame?
no
I bought this second hand and the straps are missing. It's this a big issue so you think??
I have the same bed and slats from Ikea. The problem is, how did you put the slated base onto the bed with the plastic screw that are supposed to go between the slats? These plastic white screws don't fit between the slats, because the slats are on a frame. Did you just take them off?
are you talking about screws and white plastic 3 and 4 like the picture in the link? if it is, you have to remove them
www.google.com/imgres?imgurl=https%3A%2F%2Fs8.postimg.cc%2Fksg4m0p6t%2FIMG_4714.jpg&imgrefurl=https%3A%2F%2Fwww.ebay.fr%2Fitm%2MKE COMPLETE-SET-OF-SCREWS-AND-FIXINGS-High-Low-Model-Bed-Frame-Nail-DIY-% 2F321704090603 & tbnid = 44DD7vdQaXS_SM & vet = 12ahUKEwjCherdqZfuAhUa-hoKHXD7DR..iDP & hNygGegM = 800% wiDP & hNygGegM = 800% wiDQMidGegU = 1100% wiKHXD7DR & hGNWGM = 800% = 800 20malm% 20ikea% 20vis% 20plastique% 20blanc & hl = fr & ved = 2ahUKEwjCherdqZfuAhUa-hoKHXD7DRUQMygGegUIARCpAQ
www.google.com/imgres?imgurl=https%3A%2F%2Fs8.postimg.cc%2Fksg4m0p6t%2FIMG_4714.jpg&imgrefurl=https%3A%2F%2Fwww.ebay.fr%2Fitm%2FIKEA-MALM-COMPLETE-SET-OF-SCREWS-AND-FIXINGS-High-Low-Model-Bed-Frame-Nail-DIY-%2F321704090603&tbnid=44DD7vdQaXS_SM&vet=12ahUKEwjCherdqZfuAhUa-hoKHXD7DRUQMygGegUIARCpAQ..i&docid=RAs7Y5WMJNDPNM&w=1100&h=800&itg=1&q=cadre%20lit%20malm%20ikea%20vis%20plastique%20blanc&hl=fr&ved=2ahUKEwjCherdqZfuAhUa-hoKHXD7DRUQMygGegUIARCpAQ
@S W in 2:10 - 2:14 you can see that he removed them, where they were screwed in before.
Just follow the instructions.
My job is to build IKEA furniture (and other brands) and this is my least favorite build by a margin.
Why? Which is the most stable and quiet slats and bed?
Do you mean this product is your favourite to build yourself or that this is your favourite video of a build to watch?
Do you want this to be an instruction video or fun one. Swinging your camera like that makes one terribly dizzy Cut it
Silly product ...waste of time to assemble