Products that we use and recommend: ► Front Bumper Cover: amzn.to/4fepAvt ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Nice job, I like that you did it without having to jack up the car and remove inside fender wheel and wheels and such, this makes it a lot easier to do. thanks for the how to.
Great how to,Best one i've seen without having to remove the wheels! which is a big plus, Now one thing to add is once you get headlight loose,you can just leave it connect,slide it a little out of the way to get to the m10 nuts, using a M10 ratchet/ ratchet wrench remove the T10 nuts,3 on each side, put the headlight back into place screw the four T30 screws, not too tight since your going to be taking them back out to put bumper back on after finish working on say timing belt or water pump,radiator and such. this saves the problem of accidentally breaking the tab on the light plug.. But the how to is great, just added this since i was able to do it just now..
How do did you remove the lower part of the bumper? (the part around the fog-lights?) That's all I need to do, I don't want to remove the whole bumper, just the lower-half.
After removing all those screws and nuts, my car's bumper still doesn't come off... are there any other screws hidden somewhere? ... 5 minutes later😂😂. where you showed those 6mm hexbolts, on my car are T-20 instead and I found two more right above, that's why the bumper didn't come out. Anyway thanks for the video!
Products that we use and recommend:
► Front Bumper Cover: amzn.to/4fepAvt
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
Hi guys.random question...is b6 suspension the same as b7 suspension?
Thanks
This is the best video I've seen for showing how to take the bumper off. Easier than taking the wheel well apart
From Transylvania to Pennsylvania Audi Repair shop!!
These guys do get the job done
Nice job, I like that you did it without having to jack up the car and remove inside fender wheel and wheels and such, this makes it a lot easier to do. thanks for the how to.
This guy is a proper Audi tech he’s even using a genuine Audi screwdriver 😎
Great how to,Best one i've seen without having to remove the wheels! which is a big plus, Now one thing to add is once you get headlight loose,you can just leave it connect,slide it a little out of the way to get to the m10 nuts, using a M10 ratchet/ ratchet wrench remove the T10 nuts,3 on each side, put the headlight back into place screw the four T30 screws, not too tight since your going to be taking them back out to put bumper back on after finish working on say timing belt or water pump,radiator and such. this saves the problem of accidentally breaking the tab on the light plug.. But the how to is great, just added this since i was able to do it just now..
thank you very much it was very clear
How do did you remove the lower part of the bumper? (the part around the fog-lights?) That's all I need to do, I don't want to remove the whole bumper, just the lower-half.
And good luck getting it back in............
Well done ,thanks guys
Thanks bro
The hose with the water, what is that? Where is the water ultimately coming from?
windshield deposit i have same car
I have a 2005 audi s4 b6 what front end in regards to bumper and radiator support would fit it ..will a audi s4 b6 and from what year and model
Great Video
Thats the easy!
IS it the same procedure for the 3.0 v6?
sounds like shaggy in angel
Can you guys make video on how to install a front bumper?
Okey okey
After removing all those screws and nuts, my car's bumper still doesn't come off... are there any other screws hidden somewhere? ... 5 minutes later😂😂. where you showed those 6mm hexbolts, on my car are T-20 instead and I found two more right above, that's why the bumper didn't come out. Anyway thanks for the video!
Im having the same issue. I have an 05 1.8t Manual avant.
How much would you you say the bumper weighs?
nice english
you guys are bulgarian right? the accent is almost identical and also the martenica :D
няма отговор. т.е. не чакай да ти отговорят
Why is there bubble wrap on the ground
How you take the Skirt of the Bottom.
K tío del garaje a un cohete y para la luna
mn mersi
Did you sell that car and if you did how much?
You claimed to reinstall the bumper and never did🤦🏻
Anyone know where I can find a bumper like this? A4 2005 quattro
Που θα βρούμε μεταχειρισμένα ανταλακτικα Αθηνα
Really guys? There's no need to remove the headlights.
Just move the fender liner to the side and unscrew the nuts from the fender well.
Yeah if you like working around a wheel. Headlight is easier
Guess it's because I'm spoiled and always work on a lift :P
If you're crawling around on the floor doing work I guess headlights are easier.
List what he uses to record but cant list what tools are needed nobody cares what camera or lense you used