DO BMC FILTERS MAKE YOUR CAR FASTER??

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ธ.ค. 2024

ความคิดเห็น • 64

  • @G82Jesse
    @G82Jesse 10 หลายเดือนก่อน +6

    I mean, 20 milliseconds is NOT a humanly quantifiable measure of time, and even outside the accuracy specification claims of Dragy. It's hard to really say it's a definitive performance increase when we're talking about less than one-third of one percent change haha

    • @carguy302
      @carguy302  10 หลายเดือนก่อน +6

      Same day…Same car…Same temperature…Same Road & the car was run within 30 minutes of each other with a measurable and repeatable increase in a measured performance metric. Same results with my M5.
      Does it make a HUGE difference? No
      Does it a make marginal difference? Yes
      Was this test mostly for fun and in the name of carguy science? Absolutely 😎

  • @seandoc97
    @seandoc97 ปีที่แล้ว +3

    Your mods are tasteful and the “everyday” own can do. Great job my dude and thanks for the review!!!!

    • @carguy302
      @carguy302  ปีที่แล้ว

      Thanks my man! Great to hear 💯

  • @patthonsirilim5739
    @patthonsirilim5739 8 หลายเดือนก่อน +2

    i think most drop in filter are more for sound and trottle reponse then actuly power gains hks literally on claim increase trottle reponse for there drop in filter and bmc is one of the best air filter companies out there so i guess its kind of worth it.

    • @carguy302
      @carguy302  8 หลายเดือนก่อน

      I agree but had fun with the experiment and to my surprise there was a slight improvement in acceleration. Same day and runs were done back to back. BMC makes a quality filter.

  • @juliomolina7014
    @juliomolina7014 วันที่ผ่านมา

    Stock exhaust? Downpipes?

    • @carguy302
      @carguy302  วันที่ผ่านมา

      Stock downpipes & stock axle back. The only exhaust mod was a mid pipe.

  • @euripidesroques6648
    @euripidesroques6648 ปีที่แล้ว +2

    Great video!!! Any difference in the sound from the cabin?

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      Thanks!! Yes there is a noticeable difference from inside the cabin. It’s OEM+ if that makes sense.

  • @atahankoymen3746
    @atahankoymen3746 4 หลายเดือนก่อน

    When you took the charcoal filter out, you left the plastic structure. Aren't you concerned that under load, due to suction generated the plastic eventually can collapse and fall in. I am about to do this mod and debating to leave it as is like you did or may be cutting the plastic structure that used to hold the charcoal filter out.

    • @carguy302
      @carguy302  4 หลายเดือนก่อน +1

      That's a great question...I was not concerned that the plastic structure would collapse under load. The part was designed to withstand the air entering the intake tract.

    • @atahankoymen3746
      @atahankoymen3746 4 หลายเดือนก่อน

      @@carguy302 did u drive it like that for a long time. Like how many miles. Thanks

  • @SUPERFLUID88
    @SUPERFLUID88 9 หลายเดือนก่อน

    Hi
    Why do you need to remove the charcoal filters?

    • @carguy302
      @carguy302  9 หลายเดือนก่อน +3

      Great question…The charcoal filters are an unnecessary addition to the cars due to BS carb requirements on manufacturers. Removing the charcoal filters are proven to provide more air flow and sound.

  • @buildindian8169
    @buildindian8169 ปีที่แล้ว +2

    How much did bmc pay you to do this

  • @sonersonerkek
    @sonersonerkek 3 หลายเดือนก่อน

    K&N gibt es auch. Was ist der Unterschied zur BMS?

    • @carguy302
      @carguy302  3 หลายเดือนก่อน

      From what I can gather BMC filters are better built. Providing better wicking/bleed than K&N filters.

  • @GaryBrown-j2x
    @GaryBrown-j2x 3 หลายเดือนก่อน

    You cant do one run back to back 'same road same temps' and draw a conclusion that the filters make power. You need make multiple runs and avg it out. Or at least take the launch out of the equation and do a longer run to compare. Car looks great though.

    • @carguy302
      @carguy302  3 หลายเดือนก่อน

      Appreciate your opinion & thanks for checking the channel out! Back to back runs on the same road, same temps on the same day within an hour apart is exactly what you want when doing an apples to apples comparison. Ironically my 2022 M5 Comp saw similar results when I did the same back to back comparison. Real world test & results plus it was done in the name of fun. 😎

  • @a-gabe9985
    @a-gabe9985 ปีที่แล้ว

    Nice job, informative and useful vido

    • @carguy302
      @carguy302  ปีที่แล้ว

      Much appreciated!! Great to hear. 😎

  • @tommartin221
    @tommartin221 2 หลายเดือนก่อน

    thank you for the video!!

    • @carguy302
      @carguy302  2 หลายเดือนก่อน

      You’re welcome! Thanks for checking the channel out. 💯

  • @jessealcalarealtyone
    @jessealcalarealtyone ปีที่แล้ว

    What are you lowered on?

  • @aaronacj
    @aaronacj 11 หลายเดือนก่อน +2

    0-60 will be more traction dependent.

    • @carguy302
      @carguy302  11 หลายเดือนก่อน

      Traction plays a huge role in 0-60 times and that the reason I made sure the runs were made on the
      - same day
      - same temperature
      - same stretch of road
      These factors play a role as well. I found similar results with when testing BMC filters on my M3z From what I gathered they offer an improvement in sound & performance.

  • @I_am_Monty
    @I_am_Monty ปีที่แล้ว

    Subscribed! Awesome videos keep it up 👍

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      Thanks my man! Appreciate the sub..💯

  • @rickw8645
    @rickw8645 ปีที่แล้ว +2

    Definitely more intake noise noticeable

    • @carguy302
      @carguy302  ปีที่แล้ว +2

      💯…Sounds great driving around

    • @rickw8645
      @rickw8645 ปีที่แล้ว

      @@carguy302 did you have any exhaust mods when you did this or a decat? Mine gets delivered on Tuesday and ordered some of these filters, also had them on my C63S

  • @ericsivilla4091
    @ericsivilla4091 ปีที่แล้ว

    Are tge bmc filters dry, or oiled ? Also can they be cleaned and reused ?
    Great video. I just subscribed.

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      Great to hear. Thanks for the the sub! 💯 From my understanding all BMC filters are pre oiled and can be cleaned and reused.

    • @ericsivilla4091
      @ericsivilla4091 ปีที่แล้ว

      @@carguy302 thanks for the great videos

    • @moisesperez4659
      @moisesperez4659 7 หลายเดือนก่อน

      Oiled

  • @1320GT
    @1320GT ปีที่แล้ว

    Will these work on your m5?

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      Just checked and BMC does offer filters for the F90 M5’s. 🤔 Might have to order a set

    • @1320GT
      @1320GT ปีที่แล้ว

      Your next video Could be F90 M5 w/BMC Filters !

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      @@1320GT Great minds think alike! 😉

  • @nicholasborrelli7544
    @nicholasborrelli7544 ปีที่แล้ว +2

    Honestly a dumb idea to do 0-60 and say "its faster!". 0-60 relys way too much on traction. Should have compared 60-130 with similar DA

    • @carguy302
      @carguy302  ปีที่แล้ว

      Thanks for the feedback! Both times I installed BMC filters in my M cars I saw a similar improvement with the 0-60mph
      Same day, same temps & better results.

  • @rjzmas1645
    @rjzmas1645 ปีที่แล้ว

    ///Mpower, go on for new BMW car Video….💪🏻💪🏻💪🏻🔥🔥🔥

  • @moisesperez4659
    @moisesperez4659 7 หลายเดือนก่อน

    More noise. I went back to oem on my m156

    • @carguy302
      @carguy302  7 หลายเดือนก่อน

      Definitely increases the intake sound. Great bang for the buck. BMC makes top quality filters

  • @Prodigy_ad
    @Prodigy_ad ปีที่แล้ว

    I just put K&N filters in my G80 and you don’t need to remove the strut braces.

    • @carguy302
      @carguy302  ปีที่แล้ว +1

      Interesting…🤔 Every how to I found recommended the removal of the strut brace. Thanks for sharing

    • @Prodigy_ad
      @Prodigy_ad ปีที่แล้ว

      @@carguy302 before I put in the filters I did some research because I also thought the strut braces needed to be removed. Some guy selling over priced drop in filters did a video and he showed that once you loosen all the screws and the intake clamp, the top of the filter housing can easily be wiggled out of place and goes back just as easy.

  • @xaero18
    @xaero18 ปีที่แล้ว

    Cool video, good job!
    Your m3 looks stunning, especially without license plate in the front ☺️ in Europe we can only dream about it

    • @carguy302
      @carguy302  ปีที่แล้ว

      Thank you! 🙌🏼 I’m grateful we aren’t required to run a front plate. Some states in the US have to.

  • @thewizard1196
    @thewizard1196 ปีที่แล้ว

    Get the bms intake

    • @carguy302
      @carguy302  ปีที่แล้ว

      Just curious why you recommend BMS intakes?

    • @thewizard1196
      @thewizard1196 ปีที่แล้ว

      @@carguy302 I have it and it sound good idk if it’s a mind thing but I could definitely feel how the car pull top end

    • @thewizard1196
      @thewizard1196 ปีที่แล้ว

      @@carguy302 and it’s at a decent price I have the engine mounted ones…it’s loud enough to turn heads of pedestrians when release throttle.

    • @thewizard1196
      @thewizard1196 ปีที่แล้ว

      I uploaded a shorts just now with the sound you could check it out

  • @mcbdx
    @mcbdx 7 หลายเดือนก่อน

    Love the way you take the carbon filters out without removing the carbon filter plastic welds

    • @carguy302
      @carguy302  7 หลายเดือนก่อน

      Appreciate it brotha! 💯 Thanks for checking the channel out.

  • @PKperformanceEU
    @PKperformanceEU 6 หลายเดือนก่อน

    Only clowns use 0-60 for performance measure

    • @carguy302
      @carguy302  6 หลายเดือนก่อน +2

      Only a 🤡 like you would say something so ignorant. You do realize 0-60 is a performance metric used by every auto manufacture etc. Just like quarter mile times, 60-130 etc. If you’d like to see those stats for the car check out the other videos 😉 Now go back under the rock you crawled out of TROLL