Barcode Scanner to Mitsubishi HMI GOT2000 Communication
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2020
- Using a Barcode Reader with the GOT (Barcode Function)
The barcode function enables the GOT to read the data from a barcode by using a barcode reader.
------------------------------------------------------------------------------------------------------------------------------------------
Program Sample At:
automationsolutions.tk/
automationsolutionz.blogspot....
Download Sample Section
------------------------------------------------------------------------------------------------------------------------------------------ - วิทยาศาสตร์และเทคโนโลยี
Sir GT1020 HMI & Cognex dm260 scanner can i communicate through rs232 port.
I am not able to communicate between scanner and gs2107 wtbd n hmi after doing all the setting ... What should be the reason ?
You may not have changed the mode of your scanner to RS232.
Header none termination CR and for rs232 you need to configure usb scanner
Hi have you used a barcode to select a record within a recipe any ideas?
Not yet!
thanks for always your support
sir please tell
how to send barcode read (scan) command continuously in every 5 second
Barcode scan is done manually in this case
Sir thanks for always your support
I have a question
Why we use in numerical & text display or entry
Offset function
Please explain
I tried to connect Zebra DS3608 to GS2107 but it does not read the value ... But same scanner i tried with rs232-adp in plc it works and even in hyperterminal it can read but with hmi alone i cannot ..
Check For CR or LF terminator
@@Technocrats91 CRC means ??
Cr or LF terminators
Change the setting of your scanner to RS232 after that try to read it will work.
Can we communicate through USB
Yes
@@Technocrats91 can u please share the details. I tried but I didn't get data.
My Barcode is of Zebra Company.
Thanks in advance.
are you using RS232 port or USB
@@Technocrats91 USB port only
GOT Model No.
If you use read address D1000
Please use Text Display address D1001